Heavy metal concentrations in the liver of three duck species: influence of species and sex

To investigate interspecific and intersex differences in heavy metal levels, we analysed concentrations of cadmium, cobalt, chromium, copper, lead, mercury, manganese, nickel and zinc in the livers of male and female black duck (Anas rubripes), mallard (A. platyrhynchos) and greater scaup (Aythya marila) collected in Raritan Bay, New Jersey in December 1980 and January 1981. Certain metal levels varied significantly by species and sex. In all species, Zn and Cu had the highest concentrations, and Cd, Co, and Hg were lowest in all three species. Scaup had significantly higher levels of Cu than black ducks and mallards, and mallards had significantly higher levels of Mn and Zn than black duck and scaup. Overall, eight of nine metal levels were higher in male than female black duck. In scaup, females had significantly higher levels of Pb and Mn than males. In black ducks, males had significantly higher levels of Cu, Mn and Zn than females. The sample of mallard was too small to test intersex differences.     

The effect of pH on zinc adsorption equilibria and exchangeable zinc pools in soils

Zinc adsorption equilibria were measured in soils differing in pH but with similar textures and total zinc concentrations, using adsorption isotherm and isotopic exchange techniques. The results suggested that the equilibrium between solution and exchangeable zinc was strongly pH dependent and the active zinc species in adsorption was single charged (e.g. Zn(OH)(+)). The size of the exchangeable zinc pool was not strongly pH dependent. Similar results were obtained when zinc was added to the soils, either as Zn(NO(3))(2) or in sewage sludge.     

Boreal bog plants: nitrogen sources and uptake of recently deposited nitrogen

The main goals of this study were to determine the delta15N signature of quantitatively important boreal bog plants as basis for discussing their N sources, and to assess the effects of five different 3 year N treatments (i.e. 0, 5, 10, 20 and 40 kg N ha(-1) year(-1)) on the bog plants and surface peat at different depths (i.e. 0, 5, 10, 20 and 40 cm) by using 15N as tracer. Plants and peat were analyzed for N concentration, 15N natural abundance and 15N at.%. From the results we draw three main conclusions: First, the relative importance of different N sources is species-specific among bog plants. Second, an annual addition of 5 kg N ha(-1) year(-1) was sufficient to significantly increase the N concentration in Sphagnum mosses, liverworts and shallow rooted vascular plants, and an annual addition of 40 kg N ha(-1) year(-1) during 3 years was not sufficient to increase the N concentration in deep rooted plants, although the 15N content increased continuously, indicating a possible longer term effect. Third, an annual addition of 40 kg N ha(-1) year(-1) during 3 years increased the N content in surface peat at depths of 5 and 10 cm, but not at depths of 20 and 40 cm, indicating the capacity of the living Sphagnum mosses and the surface peat to take up deposited N, and thereby function as a filter.     

Liquid chromatography study of pyrene degradation by two micromycetes in a freshwater sediment.

Pyrene biodegradation in a freshwater sediment without fungi supply, or inoculated with two sediment micromycetes, Mucor racemosus var. sphaerosporus and Phialophora alba was studied after 0, 5, 13, 28, 60 and 90 days. The influence of glucose addition was estimated, and a liquid chromatographic method for simultaneous quantitative determination of residual anthracene, fluoranthene and pyrene in the sediment was developed. Samples with PAHs were extracted in Soxhlet with ethyl acetate, and LC analysis was performed on a 5 microm Supelcosil column (150 x 4.6 mm I.D.) with gradient elution (2 ml min(-1)) of acetonitrile-water and UV detection at 254 nm. Recoveries of anthracene, fluoranthene and pyrene were 90.3%+/-1.1%, 93.2%+/-0.9% and 90.42%+/-1.9%, respectively, without interference. The native sediment microorganisms (with or without glucose added) have shown 35% pyrene degradation and sediment with glucose inoculated by the strains revealed 40%.     

Dissolved organic matter fractions formed during composting of winery and distillery residues: evaluation of the process by fluorescence excitation-emission matrix

The aim of the present paper is to assess the maturity degree reached by different samples of several mixtures from winery and distillery residues composted using the Rutgers composting system, by means of excitation-emission matrix (EEM) fluorescence spectroscopy. The composts were sampled once a week for about 200d. EEM spectra indicate the presence of different fluorophores. The fluorescence intensities of these peaks show trends related to the maturity of the composting samples selected. The "contour density" of EEM maps is strongly modified through time. We have used the quantitative method of fluorescence regional integration (FRI). The EEMs were delineated into five excitation-emission regions. The degree of compost maturity could be correlated with the percentage of the volumetric integration under the EEM within each region. Further refinement of these techniques should provide a relatively rapid method for assessing the suitability of the compost to soil application.     

PAH and soot emissions from burning components of medical waste: examination/surgical gloves and cotton pads

This is a laboratory investigation on the emissions from batch combustion of representative infectious ("red bag") medical waste components, such as medical examination latex gloves and sterile cotton pads. Plastics and cloth account for the majority of the red bag wastes by mass and, certainly, by volume. An electrically heated, horizontal muffle furnace was used for batch combustion of small quantities of shredded fuels (0.5-1.5 g) at a gas temperature of approximately 1000 degrees C. The residence time of the post-combustion gases in the furnace was approximately 1 s. At the exit of the furnace, the following emissions were measured: CO, CO2, NOx, particulates and polynuclear aromatic compounds (PACs). The first three gaseous emissions were measured with continuous gas analyzers. Soot and PAC emissions were simultaneously measured by passing the furnace effluent through a filter (to collect condensed-phase PACs) and a bed of XAD-4 adsorbent (to capture gaseous-phase PACs). Analysis involved soxhlet extraction, followed by gas chromatography-mass spectrometry (GC-MS). Results were contrasted with previously measured emissions from batch combustion of pulverized coal and tire-derived fuel (TDF) under similar conditions. Results showed that the particulate soot) and cumulative PAC emissions from batch combustion of latex gloves were more than an order of magnitude higher than those from cotton pads. The following values are indicative of the relative trends (but not necessarily absolute values) in emission yields: 26% of the mass of the latex was converted to soot, 11% of which was condensed PAC. Only 2% of the mass of cotton pads was converted to soot, and only 3% of the weight of that soot was condensed PAC. The PAC yields from latex were comparable to those from TDF. The PAC yields from cotton were higher than those from coal. A notable exception to this trend was that the three-ring gas-phase PAC yields from cotton were more significant than those from latex. Emission yields of CO and CO2 from batch combustion of cotton were, respectively, comparable and higher than those from latex, despite the fact that the carbon content of cotton was half that of latex. This is indicative of the more effective combustion of cotton. Nearly all of the mass of carbon of cotton gasified to CO and CO2 while only small fractions of the carbon in latex were converted to CO2 and CO (20% and 10%, respectively). Yields of NOx from batch combustions of latex and cotton accounted for 15% and 12%, respectively, of the mass of fuel nitrogen indicating that more fuel nitrogen was converted to NOx in the former case, possibly due to higher flame temperatures. No SO2 emissions were detected, indicating that during the fuel-rich combustion of latex, its sulfur content was converted to other compounds (such as H2S) or remained in the soot.     

Quantifying road dust resuspension in urban environment by Multilinear Engine: A comparison with PMF2

Atmospheric PM pollution from traffic comprises not only direct emissions but also non-exhaust emissions because resuspension of road dust that can produce high human exposure to heavy metals, metalloids, and mineral matter. A key task for establishing mitigation or preventive measures is estimating the contribution of road dust resuspension to the atmospheric PM mixture. Several source apportionment studies, applying receptor modeling at urban background sites, have shown the difficulty in identifying a road dust source separately from other mineral sources or vehicular exhausts. The Multilinear Engine (ME-2) is a computer program that can solve the Positive Matrix Factorization (PMF) problem. ME-2 uses a programming language permitting the solution to be guided toward some possible targets that can be derived from a priori knowledge of sources (chemical profile, ratios, etc.). This feature makes it especially suitable for source apportionment studies where partial knowledge of the sources is available.In the present study ME-2 was applied to data from an urban background site of Barcelona (Spain) to quantify the contribution of road dust resuspension to PM₁₀ and PM_2.5 concentrations. Given that recently the emission profile of local resuspended road dust was obtained (Amato, F., Pandolfi, M., Viana, M., Querol, X., Alastuey, A., Moreno, T., 2009. Spatial and chemical patterns of PM₁₀ in road dust deposited in urban environment. Atmospheric Environment 43 (9), 1650–1659), such a priori information was introduced in the model as auxiliary terms of the object function to be minimized by the implementation of the so-called “pulling equations”.ME-2 permitted to enhance the basic PMF solution (obtained by PMF2) identifying, beside the seven sources of PMF2, the road dust source which accounted for 6.9 μg m^?3 (17%) in PM₁₀, 2.2 μg m^?3 (8%) of PM_2.5 and 0.3 μg m^?3 (2%) of PM₁. This reveals that resuspension was responsible of the 37%, 15% and 3% of total traffic emissions respectively in PM₁₀, PM_2.5 and PM₁. Therefore the overall traffic contribution resulted in 18 μg m^?3 (46%) in PM₁₀, 14 μg m^?3 (51%) in PM_2.5 and 8 μg m^?3 (48%) in PM₁. In PMF2 this mass explained by road dust resuspension was redistributed among the rest of sources, increasing mostly the mineral, secondary nitrate and aged sea salt contributions.     

Formaldehyde Dose-Response in Healthy Nonsmokers

Industrial, commercial, and domestic levels of formaldehyde exposure range from <0.1 to >5.0 ppm. Irritation of the eyes and upper respiratory tract predominate, and bronchoconstriction is described in case reports. However, pulmonary function and irritant symptoms together have not been assessed over a range of HCHO concentrations in a controlled environment. We investigated dose response in both symptoms and pulmonary function associated with 3-h exposures to 0.0-3.0 ppm HCHO in a controlled environmental chamber. Ten subjects were randomly exposed to 0.0, 0.5, 1.0, and 2.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise and nine additional subjects were randomly exposed to 0.0,1.0,2.0, and 3.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise. Significant dose-response relationships in odor and eye irritation were observed (p < 0.05). Nasal flow resistance was increased at 3.0 ppm (p < 0.01), but not at 2.0 ppm HCHO. There were no significant decrements in pulmonary function (FVC, FEV₁, FEF_25-75%, SGaw) or increases in bronchial reactivity to methacholine (log PD_35SGaw) with exposure to 0.5-3.0 ppm HCHO at rest or to 2.0 ppm HCHO with exercise.     

Distribution of polycyclic aromatic hydrocarbons in agricultural soils in South Korea

The content and type of polycyclic aromatic hydrocarbons (PAH) in soils from paddy fields and upland areas in South Korea were determined using gas chromatography linked to mass spectrometry (GC–MS). The distribution map of total PAH content was obtained as a contour plot using a geographical information system. The overall distribution of PAH was found to be closely related to the pollution sources, the size of city and the type of industry. The average content of total PAH in all samples was 236 μg kg⁻¹, and the range was from 23.3 to 2834 μg kg⁻¹. The highest concentrations were found in soils sampled near iron processing plants. The concentration of PAH decreased in the order fluoroanthene>benzo(b)fluoroanthene>pyrene. Special PAH compound ratios, such as phenanthrene/anthracene and fluoroanthene/pyrene, were calculated to evaluate the origin. The collected data suggested that the pyrogenic origins such as motor vehicle exhaust and heavy industry emission were the dominant source of PAH in Korean soils.