Human dietary intake and excretion of dioxin-like compounds

Human dietary intake and excretion of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs)--collectively referred to as dioxin-like compounds (DLCs)--were investigated. Two groups of seven subjects were studied during 1999 and 2000: one aged 23.9 +/- 4.5 years, the other aged 49.4 +/- 5.2 years. For each subject, two week-long experiments were held. In one, omnivorous diets were administered, whilst in the other, a vegan diet was studied. While exposures via the omnivorous diets exceeded those via the vegan diet on a sigmaWHO-TEQ basis; for some subjects sigmaPCB exposures were comparable in both diets, implying that plant-based foods can make an appreciable contribution to exposure to sigmaPCB. For all subjects, the average dietary exposure during the omnivorous trial to PCDD/Fs and PCBs combined (expressed as WHO-TEQ) was--at 1.09 pg kg(-1) bw d(-1)--lower than recent UK "food-basket" estimates. For the same diet, the average sigmaPCB exposure for all subjects was--at 5.01 microg person(-1) d(-1)--higher than recent UK "food-basket" estimates, but consistent with recent estimates for other industrialised countries. Net absorption/excretion but not faecal excretion rates of DLCs were related to dietary intakes. Furthermore, excretion rates of the most persistent DLCs--i.e. PCB #s 138, 153, and 1,2,3,6,7,8-HxCDD--were statistically significantly greater for the older subjects. Combined, these data imply that excretion rate is dependent on body burden, and that the majority of DLCs in human faeces arise from endogenous excretion.     

Two-phase jet releases,droplet dispersion and rainout,II. Rainout experiments

This paper describes the results of the first experimental stage of Phase IV of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of this stage of the JIP was to generate experimental rainout data for non-flashing water and xylene experiments. See the overview companion paper I for a wider overview of the problem, model implementation and associated model validation.A range of orifice sizes (2.5 and 5 mm) and stagnation pressures (4–16 barg) were applied. Measurements included flow rate, initial droplet size, plume concentrations/temperatures for a range of downstream locations, and distributed rainout.Instead of the Phase Doppler Anemometry method used for droplet size measurements earlier in the JIP, a photographic technique was applied in an attempt to include measurement of the larger (non-spherical) droplets. This enabled a more accurate evaluation of the initial droplet size distribution and a much clearer understanding of the droplet morphology. The results showed that the droplet behaviour in the jet is more complex than had been anticipated with the mass distribution dominated by a very small number of large non-spherical droplets. Consequently a large number of spray images were required to evaluate an accurate size distribution.Distributed rainout was measured by weighing the amount of rainout in trays positioned along the jet direction. The rainout results showed a good degree of repeatability and internal consistency. They indicated that an increasing proportion of the released material did not rainout for increasing pressure. Rainout distance also increased with increasing pressure. Evaporation of the liquid was confirmed by temperature measurements, which showed the effect of evaporative cooling.Xylene concentration measurements (up to 1%) were carried out using a direct reading photoionization detector calibrated for xylene (measuring vapour only). For a limited dataset, the accuracy of these measurements was estimated by means of comparison against an alternative more time-consuming concentration method (xylene absorption onto a charcoal filter; measuring both vapour and liquid). The concentration measurements displayed several consistent qualitative features. For example, at a given downstream distance, the peak concentration increases with increasing pressure and nozzle diameter and the vertical height at which the peak is achieved increases. The cross-stream profiles displayed a consistent tendency to increased concentration at the edge of the jet, and the reason for this has not been established.Finally recommendations are provided for potential future work.     

The Myth of Efficiency: Technology and Ethics in Industrial Food Production

In this paper, we explore how the application of technological tools has reshaped food production systems in ways that foster large-scale outbreaks of foodborne illness. Outbreaks of foodborne illness have received increasing attention in recent years, resulting in a growing awareness of the negative impacts associated with industrial food production. These trends indicate a need to examine systemic causes of outbreaks and how they are being addressed. In this paper, we analyze outbreaks linked to ground beef and salad greens. These case studies are informed by personal interviews, site visits, and an extensive review of government documents and peer-reviewed literature. To explore these cases, we draw from actor-network theory and political economy to analyze the relationships between technological tools, the design of industrial production systems, and the emergence and spread of pathogenic bacteria. We also examine if current responses to outbreaks represent reflexive change. Lastly, we use the myth of Prometheus to discuss ethical issues regarding the use of technology in food production. Our findings indicate that current tools and systems were designed with a narrow focus on economic efficiency, while overlooking relationships with pathogenic bacteria and negative social impacts. In addition, we find that current responses to outbreaks do not represent reflexive change and a continued reliance on technological fixes to systemic problems may result in greater problems in the future. We argue that much can be learned from the myth of Prometheus. In particular, justice and reverence need to play a more significant role in guiding production decisions.     

Polybrominated diphenyl ethers in domestic indoor dust from Canada, New Zealand, United Kingdom and United States

Because of the similarities in European and North American dietary exposure, it has been suggested that the order of magnitude higher body burdens in North Americans may be due to international variations in exposure via ingestion of indoor dust. Furthermore, ingestion of indoor dust has been suggested as a possible source of PBDEs in the blood serum of New Zealanders. Hence, polybrominated diphenyl ethers (PBDEs) were measured in domestic indoor dust from: Amarillo/Austin, Texas, US; Birmingham, UK; Toronto, Canada; and Wellington, New Zealand. Concentrations of BDE 209 in two UK samples were - at 520,000 and 100,000 ng g(-1) - the highest ever recorded in a domestic (or office) indoor dust sample. Median concentrations in ng g(-1) were: in Canada 620 and 560 for Sigmatri-hexa-BDEs and BDE 209 respectively; in New Zealand 96, BDE 209 not determined; in the UK 59 and 2,800; and in the US 1600 and 1300. With respect to BDE 209, concentrations were in the order: UK approximately US>Canada. For Sigmatri-hexa-BDEs, the order of concentrations was US approximately Canada>New Zealand approximately UK. Combined with principal component analysis of congener patterns, this suggests that, while North American dusts are contaminated by both Deca- and Penta-BDE commercial formulations, UK dusts are contaminated predominantly by Deca-BDE. The Octa-BDE formulation appears of minimal importance in accordance with available market demand figures. Despite the commercial formulations of PBDEs never having been manufactured in, nor imported into New Zealand, their presence in dusts from that country suggests international trade in PBDE-containing goods is an important pathway effecting their global distribution.     

Dispersal connectivity and reserve selection for marine conservation

Although larval dispersal is crucial for the persistence of most marine populations, dispersal connectivity between sites is rarely considered in designing marine protected area networks. In particular the role of structural characteristics (known as topology) for the network of larval dispersal routes in the conservation of metapopulations has not been addressed. To determine reserve site configurations that provide highest persistence values with respect to their connectivity characteristics, we model nine connectivity topological models derived from graph theory in a demographic metapopulation model. We identify reserve site configurations that provide the highest persistence values for each of the metapopulation connectivity models. Except for the minimally connected and fully connected populations, we observed two general ‘rules of thumb’ for optimising the mean life time for all topological models: firstly place the majority of reserves, so that they are neighbours of each other, on the sites where the number of connections between the populations is highest (hub), secondly when the reserves have occupied the majority of the vertices in the hub, then select another area of high connectivity and repeat. If there are no suitable hubs remaining then distribute the remaining reserves to isolated locations optimising contact with non-reserved sites.     

Penetration of polar brominated DBPs through the activated carbon columns during total organic bromine analysis

Total organic bromine (TOBr) is a collective parameter representing all the brominated organic disinfection byproducts (DBPs) in water samples. TOBr can be measured using the adsorption-pyrolysis method according to Standard Method 5320B. This method involves that brominated organic DBPs are separated from inorganic halides and concentrated from aqueous solution by adsorption onto the activated carbon (AC). Previous studies have reported that some commonly known brominated DBPs can partially penetrate through the AC during this adsorption step. In this work, the penetration of polar brominated DBPs through AC and ozone-modified AC was explored with two simulated drinking water samples and one chlorinated wastewater effluent sample. Polar brominated DBPs were selectively detected with a novel precursor ion scan method using electrospray ionization-triple quadrupole mass spectrometry. The results show that 3.4% and 10.4% of polar brominated DBPs (in terms of total ion intensity) in the chlorinated Suwannee River fulvic acid and humic acid samples, respectively, penetrated through the AC, and 19.6% of polar brominated DBPs in the chlorinated secondary wastewater effluent sample penetrated through the AC. The ozone-modification of AC minimized the penetration of polar brominated DBPs during the TOBr analysis.     

A Method for Ensemble Wildland Fire Simulation

An ensemble simulation system that accounts for uncertainty in long-range weather conditions and two-dimensional wildland fire spread is described. Fuel moisture is expressed based on the energy release component, a US fire danger rating index, and its variation throughout the fire season is modeled using time series analysis of historical weather data. This analysis is used to characterize the seasonal trend in ERC, autocorrelation of residuals, and daily standard deviation and stochastically generate artificial time series of afternoon fuel moisture. Daily wind speed and direction are sampled stochastically from joint probabilities of historical wind speed and direction for the date range of the fire simulation period. Hundreds or thousands of fire growth simulations are then performed using the synthetic fire weather sequences. The performance of these methods is evaluated in terms of the number of ensemble member simulations, one- versus two-dimensional fire spread simulations, and comparison with results from 91 fires occurring from 2007 to 2009. Simulations were found to be in consistent agreement with observations, but trends indicate that the ensemble average of simulated fire sizes were consistently larger than actual fires whereas the farthest extent burned by fires was underestimated.     

Translating habitat class to land cover to map area of habitat of terrestrial vertebrates

Area of habitat (AOH) is defined as the “habitat available to a species, that is, habitat within its range” and is calculated by subtracting areas of unsuitable land cover and elevation from the range. The International Union for the Conservation of Nature (IUCN) Habitats Classification Scheme provides information on species habitat associations, and typically unvalidated expert opinion is used to match habitat to land-cover classes, which generates a source of uncertainty in AOH maps. We developed a data-driven method to translate IUCN habitat classes to land cover based on point locality data for 6986 species of terrestrial mammals, birds, amphibians, and reptiles. We extracted the land-cover class at each point locality and matched it to the IUCN habitat class or classes assigned to each species occurring there. Then, we modeled each land-cover class as a function of IUCN habitat with (SSG, using) logistic regression models. The resulting odds ratios were used to assess the strength of the association between each habitat and land-cover class. We then compared the performance of our data-driven model with those from a published translation table based on expert knowledge. We calculated the association between habitat classes and land-cover classes as a continuous variable, but to map AOH as binary presence or absence, it was necessary to apply a threshold of association. This threshold can be chosen by the user according to the required balance between omission and commission errors. Some habitats (e.g., forest and desert) were assigned to land-cover classes with more confidence than others (e.g., wetlands and artificial). The data-driven translation model and expert knowledge performed equally well, but the model provided greater standardization, objectivity, and repeatability. Furthermore, our approach allowed greater flexibility in the use of the results and uncertainty to be quantified. Our model can be modified for regional examinations and different taxonomic groups.     

Postfire stand structure in a semiarid savanna: cross-scale challenges estimating biomass.

Algorithms relating remotely sensed woody cover to biomass are often the basis for large-scale inventories of aboveground carbon stocks. However, these algorithms are commonly applied in a generic fashion without consideration of disturbances that might alter vegetation structure. We compared field and remote sensing estimates of woody biomass on savannas with contrasting disturbance (fire) histories and assessed potential errors in estimating woody biomass from cover without considering fire history. Field surveys quantified multilayer cover (MLC) of woody and succulent plants on sites experiencing wildfire in 1989 or 1994 and on nearby unburned (control) sites. Remote sensing estimates of the woody cover fraction (WCF) on burned and control sites were derived from contemporary (2005) dry-season Landsat Thematic Mapper imagery (during a period when herbaceous cover was senescent) using a probabilistic spectral mixture analysis model. Satellite WCF estimates were compared to field MLC assessments and related to aboveground biomass using allometry. Field-based MLC and remotely sensed WCFs both indicated that woody cover was comparable on control areas and areas burned 11-16 years ago. However, biomass was approximately twofold higher on control sites. Canopy cover was a strong predictor of woody biomass on burned and control areas, but fire history significantly altered the linear cover-biomass relationship on control plots to a curvilinear relationship on burned plots. Results suggest predictions of woody biomass from "generic" two-dimensional (2-D) cover algorithms may underestimate biomass in undisturbed stands and overestimate biomass in stands recovering from disturbance. Improving the accuracy of woody-biomass estimates from field and/or remotely sensed cover may therefore require disturbance-specific models or detection of vegetation height and transforming 2-D vegetation cover to 3-D vegetation volume.