Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

Identification of a floral-derived kairomone for currant clearwing, <Emphasis Type="Italic">Synanthedon tipuliformis</Emphasis>

The currant clearwing Synanthedon tipuliformis (Clerck) (Sesiidae) is a worldwide pest of black currants, Ribes nigrum. This moth has been observed to feed on nectar of inflorescences of Canada thistles, Cirsium arvense (L.) Scop. This work was undertaken to identify floral compound(s) produced by Canada thistles inflorescences that mediate the response of the currant clearwing. Floral volatiles were collected during the day and analysed by coupled gas chromatography/electroantennographic detection (GC/EAD) and gas chromatography/mass spectrometry (GC/MS). Three compounds consistently elicited EAD response from moth antennae and were identified by GC/MS as phenylacetaldehyde, methyl salicylate and dimethyl salicylate. When the compounds were tested individually or in various combinations in field trapping experiments, a 3-component blend attracted the largest number of female and male currant clearwings. Subsequent field trapping experiments were conducted to determine the optimal attraction dose for the ternary blend using three loadings of 1, 10 and 100 mg loaded into a polyethylene sachet. The highest catches were in traps baited with the 100 mg loading. In all trials, males and mated females were caught in significant numbers, while very low numbers of virgin females were found in the traps. In recent years the efficacy of mating disruption against currant clearwing has been reported as declining. The new kairomone blend identified in this study can be used with the sex pheromone to provide an effective control option for this important pest.     

The downfall of mating: the effect of mate-carrying and flight muscle ratio on the escape ability of a pierid butterfly

In many species, the ability to evade predators is known to be periodically impaired by increased weight loads due to feeding and reproduction. Not only may extra weight reduce escape speed, but feeding and mating can also make the prey more noticeable to visually hunting predators. A number of butterfly species mate for hours, and if a mating couple is disturbed, one of the butterflies is responsible for flying, whereas its partner remains still. This study investigated the ability of male Pieris napi butterflies to fly while mating, with the prediction that mate carrying impairs flight ability compared to single flying males and that males with relatively high flight muscle ratios (FMR; male thorax mass/male + female body mass) will have better flight performance in copula. Our results clearly show that whereas single males always take off at steep angles and fly upwards, couples invariably have a negative take-off angle and rarely gain height. Moreover, landing height of the couples is positively associated with higher FMR. Hence, male flight ability when in copula is positively associated with a high relative thorax mass. Butterfly pairs may thus be at greater risk of predation as a consequence of their impaired flight ability, especially couples with critically low FMRs (<16%).     

Toxicity of the pyrethroid bifenthrin insecticide

Bifenthrin is a chiral synthetic pyrethroid insecticide that has been commonly used for agricultural and domestic pest control over the past decades. Due to its widespread application, residues of bifenthrin has been frequently detected in environmental media, residential areas and biota, thus posing potential risks to the health of wildlife and humans. In particular, bifenthrin exhibits high acute lethal toxicity to aquatic species, and it is the primary contributor to the toxicity of insecticides in waters. Additionally, bifenthrin can also cause sublethal toxic effects on various non-target organisms, including developmental toxicity, neurobehavioral toxicity, oxidative damage, immune toxicity and endocrine disrupting effects. Here we review recent studies about the fate of bifenthrin in the environment and biological systems, the toxicity of the chiral parent compound bifenthrin and the toxic effects of main metabolites. The adverse effects of bifenthrin, identified from both in vitro and in vivo studies, and the potential underlying mechanisms are presented. We discuss the enantiomeric difference in the toxicological effects of bifenthrin, since enantiomers of chiral compounds show different interactions with biological systems. Pyrethroid insecticides metabolites are not acutely toxic, but they have sublethal toxicity, such as endocrine disrupting effects and immunotoxicity. We provide emerging evidence for toxic effects of several main metabolites.     

Broad-band versus narrow-band irradiance for estimating latitude by archival tags

The relative effectiveness of different bands of irradiance to estimate the latitude of archival tags was evaluated. These tags are placed on fishes in order to describe their movements during long distance migrations. Measurements were recorded of broad-band irradiance with and without a cosine collector and narrow-band irradiance of seven narrow bands with 50% attenuation 30 nm on either side of their central wavelength of 400 (violet), 450 (blue), 500 (blue–green), 550 (green), 600 (yellow), 650 (orange), and 700 nm (red). A holographic, cosine collector was used to reduce the vertical transmission of irradiance to the sensor and to increase horizontal transmission of irradiance so the sensor detected more of the diffuse irradiance penetrating the water at dawn and dusk. Daily measurements were made during seven periods of 1–2 days each, beginning 28 June (after 21 June solstice) and ending on 6 October 1999 (after September 23 equinox) of submarine irradiance at 15-s intervals at a fixed depth (10 m) and location (38.31°N; 123.08°W) in Horseshoe Cove, California. Irradiance transmission at this site is intermediate between the clearest offshore waters, where blue irradiance (450 nm) penetrates farther with depth than green irradiance (550 nm) and most oceanic and coastal waters, where green penetrates farther than blue irradiance. Two algorithms were used to estimate latitude, the maximum slope method and the maximum logarithmic difference method. The broad-band, cosine-corrected light, excluding those deployments near the equinox when error is highest, produced an estimate of latitude of 38.30° for both methods and a latitudinal error of ±34.4 km for the former and ±27.2 km for the latter. The mean latitudinal error for non-cosine-collected, broad-band irradiance was ±190.9 km, using the slope algorithm and ±184.8 km using the difference algorithm. The blue band of irradiance, which attenuates least with increasing depth in clear, oceanic water, also produced a comparatively high-latitudinal error of ±163.8 km error for the former algorithm and ±170.4 km for the latter algorithm. Tag designers should consider using cosine-collectors over the irradiance sensors on their archival tags to increase the accuracy of position estimates.     

Methyl jasmonate improves radical generation in macrophyte phytoremediation

Phytoremediation is the use of plants to decontaminate and improve waters and soils. Pleustonic macrophytes are plant models for research in waters. In a phytoremediation study, the elicitation of Pistia stratiotes with methyl jasmonate or salicylic acid suggests that oxytetracycline modification rate coefficients could be increased more than threefold. Here we present the elicitation of Pistia stratiotes apical primary root tips. We detected reactive oxygen species generation by X-band electron paramagnetic resonance spectroscopy, using the spin trap α-(4-pyridyl-1-oxide)-N-tert-butylnitrone (POBN). Elicitation using 0.8 mM methyl jasmonate during 1 h increased the relative spin-trapped radical concentration by +12 %. Further, results indicate acute plant toxicity above 0.24 mM salicylic acid.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

Modelling the potential mobility of Cd,Cu, Ni,Pb and Zn in Mollic Fluvisols

European floodplain soils are frequently contaminated with potentially toxic inorganic substances. We used a multi-surface model to estimate the aqueous concentrations of Cd, Cu, Ni, Pb and Zn in three Mollic Fluvisols from the Central Elbe River (Germany). The model considered complexation in solution and interactions with soil organic matter (SOM), a clay mineral and hydrous Al, Fe and Mn oxides. The amounts of reactive metals were derived from extraction with 0.43 M HNO₃. Modelling was carried out as a function of pH (soil pH ± 1.4) because it varies in floodplain soils owing to redox processes that consume or release protons. The fraction of reactive metals, which were dissolved according to the modelling, was predominantly <1%. Depending on soil properties, especially pH and contents of SOM and minerals of the clay fraction, the modelled concentrations partially exceeded the trigger values for the soil–groundwater pathway of the German soil legislation. This differentiation by soil properties was given for Ni, Pb and Zn. On the other hand, Cd was more mobile, i.e., the trigger values were mostly exceeded. Copper represented the opposite, as the modelling did not predict exceeding the trigger values in any horizon. Except for Pb and partially Zn (where oxides were more important), SOM was the most important adsorbent for metals. However, given the special composition and dynamics of SOM in mollic horizons, we suggest further quantitative and qualitative investigations on SOM and on its interaction with metals to improve the prediction of contaminant dynamics.