Aerobic granulation of pure bacterial strain

The objective of this study is to cultivate aerobic granules by pure bacterial strain, Bacillus thuringiensis, in a sequencing batch reactor. Stable granules sized 2.0–2.2 mm were formed in the reactor after a five-week cultivation. These granules exhibited excellent settling attributes, and degraded phenol at rates of 1.49 and 1.19 g phenol/(g VSS·d) at 250 and 1500 mg/L of phenol concentration, respectively. Confocal laser scanning microscopic test results show that Bacillus thuringiensis was distributed over the initial small aggregates, and the outer edge of the granule was away from the core regime in the following stage.     

Studies on acidification in two-phase biomethanation process of municipal solid waste

Biomethanation of municipal solid waste (MSW) is a slow process and the yield of biogas is usually low. Enhancement of acidification is necessary to increase the biogas yield in biomethanation of MSW. MSW contains a significant fraction of ligno-cellulosic material. The acidification of these materials influences the biogas yield. In the present study, hydrolysis and acidification have been considered as a combined phase. Experiments have been conducted to study the effect of recirculation of leachate on the acidification stage of the two-phase biomethanation process. Chemical oxygen demand (COD) and volatile fatty acid (VFA) were considered as indicator parameters. The study was also conducted to investigate the effect of using acid and alkali solution of 0.1% concentration in the acidification study. It was observed that daily recirculation of leachate does not have any major impact on the acidification process. It was also observed that treatment of MSW with sodium hydroxide yields leachate of significantly higher COD and VFA values compared to others.     

Influencing resilience: the role of policy entrepreneurs in mainstreaming climate adaptation

One way to make development pathways more resilient in the face of a changing climate has been through mainstreaming adaptation into government policies, planning and sectoral decision‐making. To date, many of the transferable lessons have taken the form of technical approaches such as risk assessments and toolkits. This article instead draws on evidence from South Asia to emphasise some of the more tacit and informal approaches used to influence adaptation policy. Despite their apparent significance in policy processes, such tactics are often neither planned for nor well reported in resilience‐building projects and programme documents. Using evidence to populate a typology of influencing strategies, this article looks particularly at the role of policy entrepreneurs who navigate the political complexity of both formal and informal governance systems to promote successful adaptation mainstreaming. It concludes with recommendations for adaptation and resilience programming that can more effectively harness the breadth of influencing strategies.     

Gamma irradiation of municipal sludge for safe disposal and agricultural use.

Gamma radiation was found to be an effective tool for hygienization of municipal wastewater sludge. The sludge received from the primary settling tank of a municipal wastewater treatment plant was gamma irradiated using a cobalt-60 source in a sludge hygienization research irradiator. The process parameters were adjusted to effectively eliminate coliform bacteria in the sludge and to prevent their regrowth. Irradiated sludge was found to be free of fecal coliform and could be directly disposed after drying in a landfill or used as manure. It could also be used as a medium for growth of Rhizobium sp for obtaining a bio-fertilizer.     

Large inter annual variation in air quality during the annual festival ‘Diwali' in an Indian megacity

A network of air quality and weather monitoring stations was established under the System of Air Quality Forecasting and Research(SAFAR) project in Delhi. We report observations of ozone(O_3), nitrogen oxides(NO_x), carbon monoxide(CO) and particulate matter(PM_2.5and PM_(10)) before, during and after the Diwali in two consecutive years, i.e., November 2010 and October 2011. The Diwali days are characterised by large firework displays throughout India. The observations show that the background concentrations of particulate matter are between 5 and 10 times the permissible limits in Europe and the United States. During the Diwali-2010, the highest observed PM_(10) and PM_2.5mass concentration is as high as2070 μg/m~3 and 1620 μg/m3, respectively(24 hr mean), which was about 20 and 27 times to National Ambient Air Quality Standards(NAAQS). For Diwali-2011, the increase in PM_(10) and PM_2.5mass concentrations was much less with their peaks of 600 and of 390 μg/m~3 respectively, as compared to the background concentrations. Contrary to previous reports,firework display was not found to strongly influence the NO_x, and O_3 mixing ratios, with the increase within the observed variability in the background. CO mixing ratios showed an increase. We show that the large difference in 2010 and 2011 pollutant concentrations is controlled by weather parameters.     

Adaptation to coastal hazards: the livelihood struggles of a fishing community in Kerala,India

This case study examines the coastal hazard adaptation strategies of a fishing community in a village in Kerala, India. It shows that formal adaptation strategies are highly techno‐centric, costly, and do not take into account the vulnerabilities of the fishing community. Instead, they have contributed to ecological, livelihood, and knowledge uncertainties. The adaptation strategies of the fishing community are a response to these uncertainties. However, they may not lead to the fishing community's recovery from its vulnerability contexts. This case study is primarily qualitative in nature. Data were collected through in‐depth interviews. Insights reveal that when actors with diverse values, interests, knowledge, and power evolve or design their respective adaptation strategies, the resulting interface often aggravates existing uncertainties associated with hazards. Furthermore, the study demonstrates that local discourses on coastal hazards are livelihood‐centric and socially constructed within the struggle of the fishing community to access resources and to acquire the right to development.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. IV. Comparative study of various stabilizers in mass polymerization and emulsion resins

The thermal oxidative stability of ionic and emulsion ABS with various antioxidants and UV stabilizers was studied. It was found that Santonox R provides better protection than Irganox 1076 to both resins. It is also the case in formulations with Tinuvin 770 and Tinuvin 328.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. 1. Influence of stabilizers and lubricants

The influence of lubricants, UV stabilizers, antioxidants, and metal deactivators on the resistance of ABS to thermal oxidation was studied by means of the chemiluminescence technique. Neither of the additives seems to affect significantly the induction period of oxidation. At the same time, the influence of various additives on the oxidation rate constant is remarkably different: the introduction of lubricants and UV stabilizers increases its value, while antioxidants and metal deactivators have the opposite effect. For the particular systems studied durability is decreased in samples containing the lubricant and UV stabilizers and increased in samples stabilized with the antioxidant and metal deactivator.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. II. ABS/polycarbonate (PC) blends

The thermal oxidative stability of various ABS/PC compounds was studied by means of the chemiluminescence technique. Similarly to pure ABS, Irganox 1076 and Irganox MD 1024 perform as moderate antioxidants in ABS/PC and (ABS/PC + lubricant) blends. Neither Tinuvin 144, Irgaphos 168, nor their mixture affects the durability of the ABS/PC blend. At the same time, (Irgaphos 168 + Tinuvin 144) in combination with Irganoxes was found to provide a noticeable enhancement in durability to the (ABS/PC + lubricant) system. Titanium dioxide pigments by themselves have only a slight influence on the oxidative stability of the ABS/PC blend. Durability of the (ABS/PC + pigment) and (ABS/PC + lubricant) systems was found to be the same and the overall protective effect of Irganox 1076 was similar in both the (ABS/PC + lubricant) and the (ABS/PC + lubricant + pigment) systems. Certain modifiers significantly improve the durability of the ABS/PC compounds, although their function may differ in the systems with and without pigments.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Smoke Suppession in Ploy (Vivngl Chloribe)

Polymeric materials are combustible in nature and poly (vtnyl chloride) is no ex-ception. Due to its high chlorine contents it is relatively fiame retardant, hawever be-cause of the processing aids such as plasttcizer etc. this advantage is lost. Duringburning the two main hazards of PVC are Hydrogen Chloride gas and copiousamount of smoke. Dtfferent methods for smoke suppression of polymers are also ap-plicable to the case of PVC. Complexes of dzfferent metal, mixedmetals and metalbased organics are discussed along with other methods of smoke suppression in PVC.Some aspects of smoke measurement have also been covered.