Dust emission calculations in open storage piles protected by means of barriers, CFD and experimental tests

The importance of open mineral storage piles in bulk solids port terminals have increased considerably in recent years in Europe and USA (in Spain, great extensions of transoceanic ports are being made) to address the increasing demand of raw material importation due to local mining operation closure. These storage piles are affected by the climatologically processes and the dust emission to the atmosphere, causing repercussions to health and environmental, which is intimately related to the air velocity, according to USEPA studies, maximum ratio of dust emission emitted from CFD and software Ansys CFX 10.0 is determined. In addition, an emission variability study based on the pile distance of different height solid barriers is developed, reducing the emission to 66%. The studies have been contrasted by published investigations and industrial measurement.     

Electrochemical degradation of chlorophenoxy and chlorobenzoic herbicides in acidic aqueous medium by the peroxi-coagulation method

The degradation of 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) as chlorophenoxy herbicides, as well as of 3,6-dichloro-2-methoxybenzoic acid (dicamba) as chlorobenzoic herbicide, has been studied by peroxi-coagulation. This electrochemical method yields a very effective depollution of all compounds in acidic aqueous medium of pH 3.0 working under pH regulation, since they are oxidized with hydroxyl radicals produced from Fenton's reaction between Fe(2+) and H(2)O(2) generated by the corresponding Fe anode and O(2)-diffusion cathode. Their products can then be removed by mineralization or coagulation with the Fe(OH)(3) precipitate formed. Both degradative paths compete at low currents, but coagulation predominates at high currents. The peroxi-coagulation process of dicamba at I>or=300 mA leads to more than 90% of coagulation, being much more efficient than its comparative electro-Fenton treatment with a Pt anode and 1 mM Fe(2+), where only mineralization takes place. For the chlorophenoxy compounds, electro-Fenton gives a slightly lower depollution than peroxi-coagulation, because more easily oxidable products are produced. Oxidation of chlorinated products during peroxi-coagulation is accompanied by the release of chloride ion to the solution. The efficiency of this method decreases with increasing electrolysis time and current. The decay of all herbicides follows a pseudo-first-order reaction, with a similar constant rate for 4-CPA, MCPA, 2,4-D and 2,4,5-T, and a higher value for dicamba.     

Removal of the herbicide amitrole from water by anodic oxidation and electro-Fenton

Here we demonstrate that an aqueous solution of the herbicide amitrole can be completely depolluted at pH 3.0 by anodic oxidation and electro-Fenton process. Anodic oxidation gives faster degradation with a boron-doped diamond anode than with a Pt anode. Electro-Fenton with a Pt anode and 1 mmol l ^–1 Fe²⁺ as catalyst yields the quickest depollution. Amitrole decay always follows a pseudo first-order reaction. NO₃^– and NH₄⁺ are accumulated in the medium during mineralization, although volatile N-products are also formed. These environmentally friendly electrochemical treatments could be applied to the remediation of wastewaters containing amitrole.     

Abatement of spinosad and indoxacarb residues in pure water by photocatalytic treatment using binary and ternary oxides of Zn and Ti

The photodegradation of indoxacarb, a broad spectrum foliar insecticide and spinosad, a natural insecticide containing two active ingredients, spinosyn A (major component) and spinosyn D (minor component), was studied in aqueous suspensions of binary (ZnO and TiO₂) and ternary (Zn₂TiO₄ and ZnTiO₃) oxides under artificial light (300–460 nm) irradiation. As expected, the influence of the semiconductor materials on the degradation of both was very significant in all cases. Photocatalytic experiments showed that the addition of semiconductors in tandem with Na₂S₂O₈ as electron acceptor strongly improved the removal of indoxacarb and spinosad in water compared with the photolytic tests. The reaction rates significantly increased, especially for the ZnO/Na₂S₂O₈ and TiO₂/Na₂S₂O₈ systems. The first-order equation (monophasic model) satisfactorily explained the disappearance process, although it offered no explanation for the small concentrations remaining in the process.     

Modelling annual pasture dynamics: Application to stomatal ozone deposition

Modelling ozone (O₃) deposition for impact risk assessment is still poorly developed for herbaceous vegetation, particularly for Mediterranean annual pastures. High inter-annual climatic variability in the Mediterranean area makes it difficult to develop models characterizing gas exchange behaviour and air pollutant absorption suitable for risk assessment. This paper presents a new model to estimate stomatal conductance (g_s) of Trifolium subterraneum, a characteristic species of dehesa pastures. The MEDPAS (MEDiterranean PAStures) model couples 3 modules estimating soil water content (SWC), vegetation growth and g_s. The g_s module is a reparameterized version of the stomatal component of the EMEP DO₃SE O₃ deposition model. The MEDPAS model was applied to two contrasting years representing typical dry and humid springs respectively and with different O₃ exposures. The MEDPAS model reproduced realistically the g_s seasonal and inter-annual variations observed in the field. SWC was identified as the major driver of differences across years. Despite the higher O₃ exposure in the dry year, meteorological conditions favoured 2.1 times higher g_s and 56 day longer growing season in the humid year compared to the dry year. This resulted in higher ozone fluxes absorbed by T. subterraneum in the humid year. High inter-family variability was found in gas exchange rates, therefore limiting the relevance of single species O₃ deposition flux modelling for dehesa pastures. Stomatal conductance dynamics at the canopy level need to be considered for more accurate O₃ flux modelling for present and future climate scenarios in the Mediterranean area.     

An in situ postexposure feeding assay with Carcinus maenas for estuarine sediment-overlying water toxicity evaluations

This study developed and evaluated a short-term sublethal in situ toxicity assay for estuarine sediment-overlying waters, with the crab Carcinus maenas (L.) based on postexposure feeding. It consisted of a 48-h in situ exposure period followed by a short postexposure feeding period (30 min). A precise method for quantifying feeding, using the Polychaeta Hediste (Nereis) diversicolor Müller as food source, was first developed. The sensitivity of the postexposure feeding response was verified by comparing it to that of lethality, upon cadmium exposure. The influence of environmental conditions prevailing during exposure (salinity, temperature, substrate, light regime, and food availability) on postexposure feeding was also addressed. The potential of this in situ assay was then investigated by deploying organisms at ten sites, located in reference and contaminated Portuguese estuaries. Organism recovery ranged between 90% and 100% and a significant postexposure feeding depression (16.3-72.7%) was observed at all contaminated sites relatively to references.     

Behaviour of alpha-, beta-, gamma-, and delta-hexachlorocyclohexane in the soil-plant system of a contaminated site

The behaviour of the organochlorine pesticide hexachlorocyclohexane (HCH) is investigated. The concentrations of alpha-, beta-, gamma-, and delta-HCH isomers were measured in soils, rhizosphere and vegetation in a contaminated area in Galicia (NW Spain). The total concentration of HCH in soils reached values close to 20,000 mgkg(-1). The plants analysed (Avena sativa L., Chenopodium spp., Solanum nigrum L., Cytisus striatus (Hill) Roth, and Vicia sativa L.) accumulated HCH, especially the beta-HCH isomer, in their tissues. The most likely mechanisms of HCH accumulation in plants were sorption of soil HCH on roots and sorption of volatilized HCH on aerial plant tissues. The concentrations of HCH obtained from the bulk and rhizosphere soils of selected plant species suggest that roots tend to reduce levels of the HCH isomers in the rhizosphere. The results reflect the importance of vegetation in the distribution of organochlorine compounds in the soil-plant system.