Properties of several fly ash materials in relation to use as soil amendments

Fly ash samples from five power stations in Western Australia and Queensland, and two soils used for horticulture in Western Australia, were evaluated for a series of physical and chemical properties. Soils were comprised primarily of coarse sand-sized particles, whereas most of the fly ashes were primarily fine sand- and silt-sized particles. Hydraulic conductivities in the fly ashes were 105- to 248-fold slower than in the soils. The water-holding capacities of fly ashes at "field capacity" were three times higher than those of the soils. Extractable P in the fly ashes (except Tarong and Callide) were 20- to 88-fold higher than in the soils. The pH showed considerable variation among the different sources of fly ash, with samples from Muja being the most acidic (pH = 3.8; 1:5 in CaCl2 extract) and from Gladstone the most alkaline (pH = 9.9). The toxicity characteristic leaching procedure (TCLP) values indicate that the potential for release of trace elements from the fly ashes was well below regulatory levels. When applied at sufficient rates (e.g., to achieve 10% w/w in surface layers) to sandy soils, fly ash altered texture and increased water-holding capacity. Depending on the source of fly ash used, such amendments could also provide P and aid nutrient retention by increasing the phosphorus retention index (PRI) and/or cation exchange capacity (CEC). The considerable variability in physical and chemical properties among the fly ash samples evaluated in the present study supports the notion that field trials are essential to the future development of soil amendment strategies making use of any particular source of fly ash.     

Chemical extraction methods to assess bioavailable arsenic in soil and solid media

Soil ingestion by children is an important pathway in assessing public health risks associated with exposure to arsenic-contaminated soils. Soil chemical methods are available to extract various pools of soil arsenic, but their ability to measure bioavailable arsenic from soil ingestion is unknown. Arsenic extracted by five commonly used soil extractants was compared with bioavailable arsenic measured in vivo by immature swine (Sus scrofa) dosing trials. Fifteen contaminated soils that contained 233 to 17 500 mg kg(-1) arsenic were studied. Soil extractants were selected to dissolve surficially adsorbed and/or readily soluble arsenic (water, 1 M sodium acetate, 0.1 M Na2HPO4/0.1 M NaH2PO4) and arsenic in Fe and Mn oxide minerals (hydroxylamine hydrochloride, ammonium oxalate). The mean percent of total arsenic extracted was: ammonium oxalate (53.6%) > or = hydroxylamine hydrochloride (51.7%) > phosphate (10.5%), acetate (7.16%) > water (0.15%). The strongest relationship between arsenic determined by soil chemical extraction and in vivo bioavailable arsenic was found for hydroxylamine hydrochloride extractant (r = 0.88, significant at the 0.01 probability level). Comparison of the amount of arsenic extracted by soil methods with bioavailable arsenic showed the following trend: ammonium oxalate, hydroxylamine hydrochloride > in vivo > phosphate, acetate > water. The amount of arsenic dissolved in the stomach (potentially bioavailable) is between surficially adsorbed (extracted by phosphate or acetate) and surficially adsorbed + nonsurficial forms in Fe and Mn oxides (extracted by hydroxylamine hydrochloride or ammonium oxalate). Soil extraction methods that dissolve some of the amorphous Fe, such as hydroxylamine hydrochloride, can be designed to provide closer estimates of bioavailable arsenic.     

Utilization of Photographs for Determining Impact Indicators for Trail Management

Indicators are a key component of resource management, but selecting them can be difficult and controversial. This study explores different methods for selecting impact indicators for management of trail conditions by comparing photo survey methods (PSM) with written survey methods (WSM). A total of 661 subjects participated in interviews conducted within Mudeung- Mountain Provincial Park in Kwang-ju, Korea. PSM explained variation in acceptability better than WSM. Six major photo components (in order of importance: area of large rocks on trail, area of wood steps, area of bare roots, area of bare soil, area of small stones, and area of stone steps) explained 84.7% of the variation in acceptability of trail management conditions. This study suggests that PSM can be a useful tool for selecting impact indicators. Supported by the grant of Post-Doctoral Program, Chonbuk National University (2001)     

Development and Adoption of a Simple Nonpoint Source Pollution Model for Port Phillip Bay,Australia

New computing tools and approaches allow tailored development of software to meet the needs of environmental managers. The processes required for such tailoring fit well with adaptive management concepts where, as knowledge and system understanding develop among managers, the software can be developed or replaced to match. This paper reports on development and adoption of a simple nonpoint source pollution modeling tool, including technical aspects of data support for modeling and social aspects of software design. The software, named FILTER, used a unit load model to generate expected pollutant loads from subcatchments of Port Phillip Bay, Australia. Monitoring data were used for calibration to modify the delivery of generated pollutants to receiving waters. Spatial, tabular, and charting software components were used to provide alternative forms of output visualization. FILTER was developed using a process that resulted in manager-stakeholders taking responsibility for setting of model parameter values and operation of the user interface, thereby encouraging uptake. The inclusive development process, tailoring of the software to manager needs and styles of usage, and matching of model complexity to data and knowledge, resulted in a successful application that has become the current agreed system representation among disparate stakeholder organizations.     

Landform Classification for Land Use Planning in Developed Areas: An Example in Segovia Province (Central Spain)

Landform-based physiographic maps, also called land systems inventories, have been widely and successfully used in undeveloped/rural areas in several locations, such as Australia, the western United States, Canada, and the British ex-colonies. This paper presents a case study of their application in a developed semi-urban/suburban area (Segovia, Spain) for land use planning purposes. The paper focuses in the information transfer process, showing how land use decision-makers, such as governments, planners, town managers, etc., can use the information developed from these maps to assist them. The paper also addresses several issues important to the development and use of this information, such as the goals of modern physiography, the types of landform-based mapping products, the problem of data management in developed areas, and the distinctions among data, interpretations, and decisions.     

Forest Perception and Knowledge of Hikers and Mountain Bikers in Two Different Areas in Northwestern Switzerland

Recreational activities can have major impacts on vegetation and wildlife in frequently visited forests. We assessed forest perception and knowledge (state, functions, and species diversity) among hikers and mountain bikers in a frequently visited, seminatural suburban recreation forest (Muttenz) and in a more distantly situated, naturally grown excursion forest (Wasserfallen) in northwestern Switzerland. In all, 239 hikers and 126 mountain bikers were interviewed. Mountain bikers in both forests and hikers in the more intensely used recreation forest at Muttenz assessed the state of the forest less optimistically and showed a higher awareness of the negative impact of recreational activities on the flora and fauna than hikers at Wasserfallen. Furthermore, mountain bikers seemed aware of the social conflicts caused by their activity, since they appreciated neutral or positive encounters with other forest visitors. In contrast, 57% of hikers at Muttenz reported on negative experiences with other forest visitors, particularly with mountain bikers. In general, the interviewees ecological and biological forest knowledge (forest type and function, species diversity) was rather high. A large proportion was aware of the pros and cons of different forest conditions for plants and animals, and could name or recognize at least some plant and/or animal species typical for the visited forest. The forest knowledge was neither influenced by the type of recreational activity carried out nor by any aspect of forest visit behavior (frequency and duration of forest visits, means of transportation and travel distance to forest). However, the interviewees forest knowledge was influenced by their age and educational level.     

Spatial Pattern of Ecosystem Function and Ecosystem Conservation

The spatial pattern of ecosystem function can affect ecosystem conservation. Ecosystem functions are often heterogeneous spatially due to physical and biological factors. We can influence ecosystem functions by changing the spatial patterns of the physical and biological elements of an ecosystem and regulating their combinations. The variation–position effect highlights a phenomenon resulting from the spatial pattern of ecosystem function. The effect shows that the identical variation of a factor may produce different effects on the overall situation when this variation occurs in a different spatial position. In a watershed of the Yangtze River, water retention is a primary ecosystem function. The variation–position effect for water retention capacity occurs in the watershed because of the spatial heterogeneity in vegetation, soil, and slope. The change of vegetation that occurs in a complex can affect the overall situation of water retention, and the effect can be different due to the change occurring in the position holding different vegetation-soil-slope complex. To improve the ecosystem in the watershed and to meet the social needs for the ecosystem function of water retention, a strategy called ecosystem function and spatial pattern-based forest extension was proposed to conserve forests. The implementation of the strategy enables the watershed to attain the maximum effective increase in water retention capacity.     

A VSA-Based Strategy for Placing Conservation Buffers in Agricultural Watersheds

Conservation buffers have the potential to reduce agricultural nonpoint source pollution and improve terrestrial wildlife habitat, landscape biodiversity, flood control, recreation, and aesthetics. Conservation buffers, streamside areas and riparian wetlands are being used or have been proposed to control agricultural nonpoint source pollution. This paper proposes an innovative strategy for placing conservation buffers based on the variable source area (VSA) hydrology. VSAs are small, variable but predictable portion of a watershed that regularly contributes to runoff generation. The VSA-based strategy involves the following three steps: first, identifying VSAs in landscapes based on natural characteristics such as hydrology, land use/cover, topography and soils; second, targeting areas within VSAs for conservation buffers; third, refining the size and location of conservation buffers based on other factors such as weather, environmental objectives, available funding and other best management practices. Building conservation buffers in VSAs allows agricultural runoff to more uniformly enter buffers and stay there longer, which increases the buffers capacity to remove sediments and nutrients. A field-scale example is presented to demonstrate the effectiveness and cost-effectiveness of the within-VSA conservation buffer scenario relative to a typical edge-of-field buffer scenario. The results enhance the understanding of hydrological processes and interactions between agricultural lands and conservation buffers in agricultural landscapes, and provide practical guidance for land resource managers and conservationists who use conservation buffers to improve water quality and amenity values of agricultural landscape.     

Impact of busy roads on breeding success in pied flycatchers Ficedula hypoleuca

The impact of dense traffic on the breeding success in pied flycatchers (Ficedula hypoleuca) was studied using roadside nest-boxes. Nest site selection and breeding success of flycatchers were observed in relation to the distance from the road. The number of occupied territories was no higher closer to the road than it was deeper inside the forest. The distance to the road had no effect on the laying date, clutch size, or brood size. However, nests closer to the road were more likely to fail at the chick stage. The number of broods that were closer to roads and were lost completely was significantly higher than those further away. As a consequence, the number of fledglings per breeding attempt decreased closer to roads. The nestlings typically died as older chicks when the parent birds were providing them with maximum quantities of food. A possible reason for the declining reproductive success was the traffic-related mortality of parent birds, as weather conditions were not especially adverse for raising healthy offspring.     

Components of the Total Water Balance of an Urban Catchment

A daily model was used to quantify the components of the total urban water balance of the Curtin catchment, Canberra, Australia. For this catchment, the mean annual rainfall was found to be three times greater than imported potable water, and the sum of the output from the separate stormwater and wastewater systems exceeded the input of imported potable water by some 50%. Seasonal and annual variations in climate exert a very strong influence over the relative magnitude of the water balance components; this needs to be accounted for when assessing the potential for utilizing stormwater and wastewater within an urban catchment.