Radionuclide fluxes at a plant manufacturing dicalcium phosphate for domestic animals

We have studied a phosphate rock plant which produces dicalcium phosphate (DCP), used as a source of calcium and phosphorus for domestic animals. A by-product in the manufacturing process is calcium chloride which is used in the oil industry, the food industry and as road-salt. The objectives of our study were to describe the fluxes of radionuclides from the 238U decay series and to estimate the radiation doses to workers at the plant. The radionuclides in the phosphate rock were found to be in secular radioactive equilibrium with 238U, with an average activity concentration of 837 Bq kg-1. Separation and concentration processes were observed at different stages in the plant. Most of the 226Ra was found in the calcium chloride, while the major part of the 238U, about 950 Bq kg-1, was found in the dicalcium phosphate. The annual occupational effective dose to the workers was found to be below the 1 mSv limit recommended by ICRP (1991a) for the public. This study has shown a good example of an important non-nuclear industry with a high input of natural radionuclides with several conceivable pathways to man.     

Investigation on organic pollutants from a domestic heating system using various solid biofuels

Various herbaceous biofuels (straw, whole plant cereals and set aside hay) and spruce wood were tested for their potential to form PCDD/F, PCPh, PCBz and PAH during combustion. The trials were conducted in an automatically charged multi-fuel furnace for domestic applications (50 kWth). Both, flue gas and the different ash fractions were analysed. CO-emission results show, that combustion conditions were relatively uniform (mean CO-level: 200 mg/m3 at 13% O2 in flue gas). Likewise, the TOC- and PAH-emissions in the fuel gas remained constantly on a relatively low level. However, for the PCDD/F, PCPh and PCBz increased emissions were detected when herbacious fuels were applied. This may be attributed to their higher chlorine concentration and the high ash content, which is responsible for increased dust emissions during combustion. Similar observations were also found for the PCDD/F-concentrations in the ashes. Combustion chamber ashes usually showed a drastically reduced contamination with highly toxical compounds, compared to the ash fraction from the heat exchanger ash or to chimney soot.     

Environmental epidemiology forward

Environmental epidemiology is the specialized aspect of public health science that studies human health risk from environmental hazards. It is rises largely upon a foundation of public health surveillance, and relies heavily upon analyses of data for small areas and sparse population groups. To a degree, environmental epidemiology is assigned the role of discerning very subtle human health impacts, or discerning early evidence of a tragic sequence. In that context, environmental epidemiology has a substantial public education and risk communication role. Environmental epidemiology will be greatly advanced as effective biological markers of exposure and precursor health effects are developed. At this point in time, statistical methods are in place to monitor population-level disease rates in high-risk populations for early risk identification and sentinel event recognition. Advances in geographic methods have provided a boon to the discipline by advantaging spatial studies. These advances in the discipline still need further refinement and pilot experiences. The inclusion of environmental epidemiological considerations with instances of proposed industrial expansion, hazardous waste management, and contamination remediation is heartily recommended.     

Impact of long-term pesticide applications on some soil biological parameters

The soil oxidative and anaerobic processes, as well as, the microbial biomass were followed during three years in a cotton farm (Tatuí) where the recommended pesticides have been used for several years, and in an experimental field (S?o Paulo) treated first time with the same pesticides. The oxidative process was monitored by the dehydrogenase (DHA)-activity using triphenyltetrazolium chloride (TTC) as substrate. The anaerobic process was followed by the iron-oxide reduction, and the microbial biomass was estimated by the substrate (glucose)-indiced respiration. Increases in DHA-activity and in the microbial biomass occurred only in the farm soil, with concomitant decreases in iron-reduction. In the experimental field soil, the increases in DHA-activity were followed only by decreases in iron-reduction. Soil characteristics were the determining factor for different biological parameters after pesticide inputs. All the pesticides produced at least one clear but transient effect.     

Speciated hydrocarbon emissions from small utility engines

Partially speciated hydrocarbon (HC) emissions data from several small utility engines, as measured by a Fourier Transform Infrared analyzer, are presented. The engines considered have nominal horsepower ratings between 3.7 and 9.3 kW. Both side-valve and overhead-valve engines are studied, and four different fuels are used in the engines. The results indicate that the small HCs present in the exhaust tend to be in the form of either methane or unsaturated HCs. Other small alkanes, such as ethane and propane, are present in only relatively small concentrations. In terms of ozone formation potential, the HCs in the form of methane will lead to little ozone, but the distribution of the C2 and C3 species is not ideal from an ozone reduction stand-point. It is also found that the presence of oxygen in the fuels appears to lead to somewhat more complete combustion, although the effects are not large. Finally, the overhead-valve engines appear to have lower HC emissions than side-valve engines, which is primarily due to higher operating A/F ratios and the engine geometry.     

Morphophysiological Rearrangements in Fish in Response to Pollution (in the Light of S.S. Shvarts' Theory)

The results of a study on morphophysiological variation in fish inhabiting a subarctic lake exposed to chronic industrial pollution are described using an example of cisco, Coregonus lavaretus. It is shown that indices of the heart, liver, kidneys, gills, and fatness in these fish are increased significantly and have retained increased values for the past 20 years. The observed changes are analyzed on the basis of biochemical data. The results of studies on the dynamics of hematological parameters in fish are used for characterizing the development of toxicosis. Adaptive rearrangements associated with an increase in the metabolic rate and the activation of protective systems in the fish are explained in the context of S.S. Schvarts' concept. The idea is proposed that the additional energy cost of detoxification may be responsible for morphophysiological variation in fish under conditions of water pollution.     

Effect of Recycling on Material Properties of Glass-filled Polyethylene Terephthalate

Recycled plastics are considered low performance materials because their properties are expected to decrease drastically with recycling. The objective of this study was to characterize a 15 wt.% glass filled polyethylene terephthalate (rPET-15GF) using six recycle generations and four recycle ratios. Mechanical properties such as tensile strength, elastic modulus, and percent elongation to failure of the PET composite were determined for various recycle generations and recycle ratios. Results show that the mechanical properties of rPET-15GF decrease slightly per recycle generation. In contrast, thermal properties of rPET-15GF were not at all affected by the recycling process. This data demonstrates that recycled glass filled PET can be used effectively to fabricate components without significantly affecting their mechanical performance.     

COMPARATIVE EVALUATION OF THREE URBAN RUNOFF MODELS1

ABSTRACT: Three urban runoff models, namely, the Road Research Laboratory Model (RRLM), the Storm Water Management Model (SWMM) and the University of Cincinnati Urban Runoff Model (UCURM), were examined by comparing the model simulated hydrographs with the hydrographs measured on several instrumented urban watersheds. This comparison was done for the hydrograph peak points as well as for the entire hydrographs using such statistical measures as the correlation coefficient, the special correlation coefficient and the integral square error. The results of the study indicated that, when applying the three selected non-calibrated models on small urban catchments, the SWM model performed marginally better than the RRL model and both these models were more accurate than the UCUR model. On larger watersheds, the comparisons between the SWM model and the other two models would be likely even more favourable for the SWM model, because it has the most advanced flow routing scheme among the studied models.     

Sample intake position and loading rates from nonpoint source pollution

Paired water samples were simultaneously activated from two different vertical positions within the approach section of a flow-control structure to determine the effect of sample intake position on nonpoint runoff parameter concentrations and subsequent event loads. Suspended solids (SS), total phosphorus (TP) and organic plus exchangeable nitrogen [(Or+Ex)-N] were consistently higher throughout each runoff event when sampled from the floor of the approach section as opposed to those samples taken at midstage. Dissolved molybdate reactive phosphorus (DMRP) and ammonium (NH₄-N) concentrations did not appear to be significantly affected by the vertical difference in intake position. However, the nitrate plus nitrite nitrogen [(NO₃+NO₂)-N] concentrations were much higher when sampled from the midstage position.Although the concentration differences between the two methods were not appreciable, when evaluated in terms of event loads, discrepancies were evident for all parameters. Midstage sampling produced event loads for SS, TP, (Or + Ex)–N, DMRP, NH₄-N, and (NO₃+NO₂)-N that were 44,39,35,80,71, and 181%, respectively, of floor sampling loads. Differences in loads between the two methods are attributed to the midstage position, sampling less of the bed load. The correct position will depend on the objective; however, such differences should be recognized during the design phase of the monitoring program.This work was supported by the Soil Science Department, College of Agriculture and Life Sciences, University of Wisconsin-Madison, and by the U.S. Environmental Protection Agency, Region V., Chicago, Illinois (Grant No. G005139-01).     

EFFICIENCY PROBLEMS FROM USER FEES IN MUNICIPAL WASTEWATER TREATMENT1

ABSTRACT: The Environmental Protection Agency administers a construction grant program to encourage abatement of wastewater pollution by sharing with municipalities the costs of wastewater treatment facilities. The enabling legislation (P.L. 92–500) specifies that EPA's cost share will be 75% of construction costs. It further requires municipalities to collect user fees from industrial users of the facilities to repay that part of the federal grant allocable to the treatment of industrial wastewater. The municipality must return half of the user fees collected to the U.S. Treasury; the municipality is allowed to retain the remaining half. Retention by municipalities of these user fees lowers their effective cost shares and results in the following consequences: (1) a bias for municipalities to select certain kinds of abatement techniques regardless of whether or not they are the least-cost techniques from the national perspective; (2) a bias for municipalities to select larger-than-optimal scales of abatement facilities; (3) a hidden federal subsidy to industry; and (4) grants that favor industrial communities. This article examines the legislative and regulatory requirements for user charges, derives the algebraic expressions for calculating the real federal, municipal, and industrial cost shares with user fees; computes municipal cost shares for selected values of the determinant factors; evaluates efficiency and other consequences of current user fee arrangements; and concludes that the efficiency distortions brought about by the impacts of user fees on cost sharing could be eliminated by requiring that all user fees collected from industry against the federal cost share be returned to the U.S. Treasury.