Anaerobic incorporation of the radiolabeled explosive TNT and metabolites into the organic soil matrix of contaminated soil after different treatment procedures

Four bioreactor designs were performed to evaluate the level of incorporation of 14C-labeled 2,4,6-trinitrotoluene (TNT) and metabolites into the organic soil matrix of different anaerobically treated contaminated soils. The contaminated soils were amended with molasses slivers (80:20% per weight) as auxiliary substrate to enhance microbial activity. After 5 weeks (bioreactors 1 and 2), 8 weeks (bioreactor 3) and 12 weeks (bioreactor 4) of anaerobic incubation, we determined 41%, 58%, 72%, and 54%, respectively, of the initially applied radioactivity immobilized in various soil fractions. After alkaline hydrolyses of the solvent-extracted soils, low quantities of radiolabel were found in the humic and fulvic acid fractions, whereas the bulk of 14C activity was found to be strongly bound to the humin fraction (solid soil residues). The amounts of solvent extractable radioactivity were 53%, 40%, 16%, and 29% for bioreactors 1, 2, 3, and 4, respectively. The level of TNT transformation at the end of the experiments was within 90-94%. Regarding the results presented in this study, we can assume that there is the possibility of high incorporation levels of TNT metabolites into the soil organic matrix mediated by microbial cometabolism under strictly anoxic conditions.     

Levels of dioxin-like compounds in sewage sludge determined with a bioassay based on EROD induction in chicken embryo liver cultures

A bioassay for the detection of dioxin-like compounds was used to estimate levels in sewage sludge from Swedish sewage treatment plants (STPs). The sludge extracts were HPLC-separated into three fractions containing a) monoaromatic/aliphatic, b) diaromatic (e.g. polychlorinated biphenyls [PCBs], polychlorinated dibenzodioxins and polychlorinated dibenzofurans [PCDDs/Fs]), and c) polyaromatic compounds (e.g. polycyclic aromatic hydrocarbons [PAHs]). The bioassay, which is based on EROD (7-ethoxyresorufin O-deethylase) induction in cultured chicken embryo livers detected dioxin-like activity in all unfractionated extracts and in the di- and polyaromatic fractions of all sludge extracts, but not in the monoaromatic/aliphatic fractions. The levels ranged between 6 and 109 pg bio-TEQ/g sludge (d.w.). In sediment samples from rural lakes in Sweden, levels of about 5 pg bio-TEQ/g (d.w.) have been found. The polyaromatic fractions of the sludge samples were potent in the bioassay, probably due to various PAHs and other polyaromatics in the sludge. The levels of six PAHs that are screened for in the sludge at Swedish STPs accounted for only 3-10% of the observed EROD-induction by the polyaromatic fractions. Consequently, many other polyaromatic EROD-inducing compounds were present in the sludge. Inclusion of a biological test like the chicken embryo liver bioassay in the screening of sludge would improve the ability to detect the presence of bioactive dioxin-like compounds. A theoretical estimation of bio-TEQ concentrations in farm-soil following long-term application of sludge with bio-TEQ concentrations similar to those observed in this investigation indicated that the bio-TEQ levels in soil would increase very slowly over time. The chicken embryo liver bioassay proved useful in assessing levels of dioxin-like compounds in sewage sludge and it gives valuable complementary information to chemical analysis data.     

Degradation of three phenylurea herbicides (chlortoluron, isoproturon and diuron) by micromycetes isolated from soil

As part of a study conducted on the fate of xenobiotics in the environment, a selection of 100 strains of micromycetes (Ascomycetes, Basidiomycetes and Yeasts) have been cultivated in liquid synthetic medium with 3 phenylurea herbicides: chlortoluron and isoproturon (100mg L-1) and diuron (20mg L-1). While 17 strains depleted isoproturon over 50% only 4 depleted diuron and 2 chlortoluron at the same level. The best results were obtained with Bjerkandera adusta and Oxysporus sp which were the most efficient towards the 3 substrates. After 2 weeks Bjerkandera adusta depleted chlortoluron 98%, diuron 92% and isoproturon 88%.     

Identification of the dimethylbenzyl mercapturic acid in urine of rats treated with 1,2,3-trimethylbenzene.

The structure was investigated of the mercapturic acid excreted in urine of rats after the i.p. administration of 1,2,3-trimethylbenzene. Of the two regioisomeric mercapturic acids, i.e. N-acetyl-S-(2,3-dimethylbenzyl)-L-cysteine and N-acetyl-S-(2,6-dimethyl-benzyl)-L-cysteine, only the former was isolated by preparative HPLC and identified, by comparison with an authentic specimen. The excretion rate of the mercapturate was estimated to be approximately 5% of dose, not a substantial metabolic route.     

Distribution in Portugal of some pollutants in the lichen Parmelia sulcata

During the months of July and August 1993 a lichen (Parmelia sulcata Taylor) collection campaign was held in Portugal where samples were obtained from olive tree bark at 228 sites, following a grid of 10 x 10 km along the Atlantic coast and 50 x 50 km in the interior of the country. The samples were analysed by instrumental neutron activation analysis and proton induced X-ray emission techniques. Concentration data patterns for the pollutants As, Cr, Hg, Ni, Pb, S, Sb, Se, and V were obtained for the whole country surface by making use of an extinction rule of 1/r(3), preventing any cut-off distance from being artificially introduced. Some pollution sources were identified: (1) oil-powered plants on the Lisbon-Setúbal axis (V, Ni), (2) coal-power plants in Porto and Sines (S, Se), (3) traffic in the northern area and the Lisbon-Setúbal axis (Pb), (4) a chemical industry south of Porto (Hg, As), and (5) soil influence (Cr, Sb). Arsenic and chromium results largely exceed, in a few areas, the concentrations acceptable to plants, and in a few spots also Hg, Ni, and Pb data.     

The variability and intrinsic remediation of a BTEX plume in anaerobic sulphate-rich groundwater

Data from long-term groundwater sampling, limited coring, and associated studies are synthesised to assess the variability and intrinsic remediation/natural attenuation of a dissolved hydrocarbon plume in sulphate-rich anaerobic groundwater. Fine vertical scale (0.25- and 0.5-m depth intervals) and horizontal plume-scale (>400 m) characteristics of the plume were mapped over a 5-year period from 1991 to 1996. The plume of dissolved BTEX (benzene, toluene, ethylbenzene, xylene) and other organic compounds originated from leakage of gasoline from a subsurface fuel storage tank. The plume was up to 420 m long, less than 50 m wide and 3 m thick. In the first few years of monitoring, BTEX concentrations near the point of leakage were in approximate equilibrium with non-aqueous phase liquid (NAPL) gasoline. NAPL composition of core material and long-term trends in ratios of BTEX concentrations in groundwater indicated significant depletion (water washing, volatilisation and possibly biodegradation) of benzene from residual NAPL after 1992. Large fluctuations in BTEX concentrations in individual boreholes were shown to be largely attributable to seasonal groundwater flow variations. A combination of temporal and spatial groundwater quality data was required to adequately assess the stationarity of plumes, so as to allow inference of intrinsic remediation. Contoured concentration data for the period 1991 to 1996 indicated that plumes of toluene and o-xylene were, at best, only partially steady state (pseudo-steady state) due to seasonal groundwater flow changes. From this analysis, it was inferred that significant remediation by natural biodegradation was occurring for BTEX component plumes such as toluene and o-xylene, but provided no conclusive evidence of benzene biodegradation. Issues associated with field quantification of intrinsic remediation from groundwater sampling are highlighted. Preferential intrinsic biodegradation of selected organic compounds within the BTEX plume was shown to be occurring, in parallel with sulphate reduction and bicarbonate production. Ratios of average hydrocarbon concentrations to benzene for the period 1991 to 1992 were used to estimate degradation rates (half-lives) at various distances along the plume. The estimates varied with distance, the narrowest range being, for toluene, 110 to 260 days. These estimates were comparable to rates determined previously from an in situ tracer test and from plume-scale modelling.     

Identifikation der kfz-bürtigen Schadstoffbelastung mit Hilfe der Verh?ltnisse der stabilen Isotope von Kohlenstoff und Schwefel

Zusammenfassung  Reifen-, Ru?-, Motoren?l-, Asphalt-, Plastik- und Lackproben aus dem Stra?enverkehr wurden auf ihre Kohlenstoff- und Schwefel-isotopenverh?ltnisse mit dem Ziel untersucht, die Frage zu beant-worten, ob diese Isotopenverh?ltnisse als Indikatoren für die Belastungssituation und die Schadstoffquellen bei der Untersuchung von stra?ennahen B?den eingesetzt werden k?nnen. Die δ¹¹C-Werte der technischen Substrate lagen zwischen-30‰ und-18‰ relativ zum PDB-Standard, Dabei zeigte sich aufgrund der unterschiedlichen Herstellungsverfahren eine deutliche Abgrenzung der Substrate untereinander. Asphalt hatte Werte zwischen-23 und-18‰, Ru? zwischen -27 und -22‰ Die Ru?proben unterschieden sich je nach Art des verwendeten Kraftstoffs. Plastik, Lack und Motor?le zeigten ?hnliche δ¹³C-Werte, die zwischen-30 und-27‰ lagen. Reifen haben relativ konstante δ¹³C-Werte um -26‰ Der Einflu? des Stra?enverkehrs auf die δ¹³C-Werte im Stra?ensediment und in stra?ennahen B?den konnte anhand verschiedener Kohlenstoffspezies an einem Transekt an einer Landstra?e aufgezeigt werden. Ein Vergleich mit verkehrstypischen Schwermetallemissionen ergab bei einzelnen Kohlenstoffspezies einen ?hnlichen Verlauf der Schwermetallkonzentrationen und der δ¹³C-Werte. Die δ³⁴S-Werte lagen zwischen -6 und +8‰ relativ zum CDT-Standard. Eine Abgrenzung der Substrate in ihren δ¹⁴S-Werten war hierbei nicht m?glich.      

Uptake and metabolism of 2,4,6-trinitrotoluene in higher plants

The fate of the explosive 2,4,6-TNT in plants is of major interest. Therefore, a method was developed to analyse TNT and derivatives in plant tissue. The method was utilized to investigate the uptake and metabolism of TNT inMedicago sativa andAllium schoenoprasum grown in hydroponic cultures containing TNT levels of 0.1 to 10 mg/1. Detectable concentrations of nitrotoluenes were significantly higher inAllium schoenoprasum than inMedicago sativa. The uptake of TNT in plants was directly related to the initial TNT level. The principal nitroaromatic components in roots and shoots of both plant species were identified as 4-ADNT and 2-ADNT in equal amounts, with substantially less TNT.     

Development of a black carbon-inclusive multi-media model: application for PAHs in Stockholm

A multi-media model was developed for predicting the fate of organic chemicals in the Greater Stockholm Area, Sweden, and applied to selected polycyclic aromatic hydrocarbons (PAHs). Although urban models have been previously developed, this model is novel in that it includes sorption to pyrogenically-derived particles, commonly termed "black carbon" (BC), within the model structure. To examine the influence of BC sorption on environmental fate of PAHs, two versions of the model were generated and run: one in which sorption to BC was included and one in which BC sorption was excluded. The inclusion of BC sorption did not cause any significant variations to air levels, but it did cause an average 20-30% increase in sediment concentrations related to increased sediment solids partitioning. The model also predicted reduced advective losses out of the model domain, as well as chemical potential to diffuse from sediments, whilst total chemical inventory increased. In all cases, the lighter PAHs were more affected by BC inclusion than their heavier counterparts. We advocate the addition of sorption to BC in future multi-media fate and exposure models, which as well as influencing fate will also alter (lower) chemical availability and, thus, wildlife exposure to hydrophobic chemicals. A quantification of the latter was derived with the help of the soot-inclusive model version, which estimated a lowering of dissolved water concentrations between five and >200 times for the different PAHs of this study.     

User involvement in the ergonomic development of a medical instrument: a longitudinal case study

In this study the focus is on the continuous ergonomic-focused development of a medical instrument that is capable of performing blood group serological tests. Primarily, a medical device must be clinically effective and safe. At the same time it must also meet the needs of its users. This calls for consideration of numerous ergonomic aspects. The development process of the product line in question was supported by a longitudinal series of carefully designed focus groups. Altogether, the 23 focus groups conducted included 245 participants from 72 laboratories. The aim of the empirical research was to collect users’ experiences, ideas and needs as inputs for the following phase of the product development process. During the mentioned focus group analyses, around 100 development proposals were conceived. Besides presenting more of the mentioned development proposals, the focus group analysis was shown as a proper methodology to involve end-users in the development and implementation of new technology or devices.