Interacting effects of ozone at 0.05, 0.1 and 0.2 ppm and powdery mildew infection were studied with respect to the growth, flowering and fruit-setting of bottle gourd, and ozone injury, fungal colonization, conidia size and germination. Intermittent exposure in closed-top chambers to ozone at 0.1 or 0.2 ppm, and infection by Sphaerotheca fulginea, each caused significant suppressions of plant growth, flowering and fruit-setting. Fungal colonization was increased by exposures to 0.05 ppm ozone, but decreased by 0.2 ppm ozone. Less browning and necrosis (symptoms of ozone phytotoxicity) appeared on the leaves of mildew-inoculated plants exposed to ozone at 0.1 and 0.2 ppm. Conidia collected from plants exposed to 0.1 and 0.2 ppm were smaller, contained fewer fibrosin bodies and showed poor germination in-vitro. Fumigations with ozone at 0.05 ppm increased the germination of conidia collected from the exposed plants or of the conidia directly exposed to ozone on glass slides in microgas exposure cabinets. Distortion and wall rupturing of the conidia were induced by exposure to ozone at 0.2 ppm for 12 h. Ozone at 0.05 ppm and S. fuliginea jointly suppressed the root and shoot growth of bottle gourd significantly more than the sum of individual effects (synergistic interaction). The fungus infection partially protected the plants from injury by ozone at 0.2 ppm, and exposure to ozone at 0.2 ppm inhibited fungal development. Antagonistic reductions of damage to bottle gourd growth by simultaneous mildew infection and ozone at 0.2 ppm were observed. The study revealed that powdery mildew infection may become severe on bottle gourd grown in areas polluted with mild level of ozone (0.05 ppm) whereas, at 0.1 ppm O3 or more, the disease will be suppressed. 相似文献
Polymer materials are vulnerable to damages, failures, and degradations, making them economically unreliable. Self-healing polymers, on the other hand, are multifunctional materials with superior properties of autonomic recovery from physical damages. These materials are suitable for biomedical and tissue engineering in terms of cost and durability. Schiff base linkages-based polymer materials are one of the robust techniques owing to their simple self-healing mechanism. These are dynamic reversible covalent bonds, easy to fabricate at mild conditions, and can self-reintegrate after network disruption at physiological conditions making them distinguished. Here we review self-healing polymer materials based on Schiff base bonds. We discuss the Schiff base bond formation between polymeric networks, which explains the self-healing phenomenon. These bonds have induced 100% recovery in optimal cases.
The present study deals with the quantitative effect of vehicular emission on ambient air quality during May 2006 in urban area of Lucknow city. In this study SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 microg m(-3) respectively in urban area and these concentrations were found to be significantly (p < 0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5% for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p < 0.05 or p < 0.01 level. Metals Pb, Mn and Cr (p < 0.01) and Cu (p < 0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO2, NOx and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity. 相似文献
Di-(2-ethyl hexyl) phthalate (DEHP), a recalcitrant and an endocrine disrupting chemical, was studied for its removal from wastewater by advanced oxidation process. The effects of pH, transition metal ions, and granular activated carbon (GAC) were investigated. Removal of DEHP increased with increase in pH and among metal ions Cr(III) was found to be the most active catalyst to remove DEHP. In the case of GAC, original carbon (G0) and GAC pre-ozonated in gas phase for 10 min (G10) were tested as catalysts in catalytic ozonation and found G0 to be more active than G10. This is because, during pre-ozonation, basic groups like chromene, pyrones and also graphene layers were oxidized to acidic surface oxygen groups. These basic surface groups are reported to be active catalytic centres for ozone decomposition into .OH which is a strong oxidant. According to kinetic manipulations, DEHP degradation rate constant due to .OH was affected by the catalyst while that due to direct ozonation is same in all cases with or without catalyst. G0 was doped with chromia gels (G0/CrA) to combine the benefits of homogeneous and heterogeneous catalysis. G0/CrA showed lower catalytic efficiency than that of only G0. This might be because of changes in surface structure of GAC caused by doping of chromia gel and changes in chemical nature of Cr(III) during formation of gel. A good correlation was found between the rate constants of ozone decay and DEHP degradation (R2=0.96). This correlation confirms that ozone decomposition into .OH is a critical factor for the activity of a catalyst during ozonation. 相似文献
The present study about the gammarid amphipods of Vellar and Uppanar estuaries was performed during two seasons (pre-monsoon and post-monsoon, 2005–2006), respectively, in nine habitats: five in the Vellar estuary and four in the Uppanar estuary. Amphipod samples were collected from sediments, oyster beds, seaweeds, sea grass, and mangroves. A total of 29 species of gammarid amphipods were collected in each area. The surface water temperature ranged from 16°C to 26°C, the salinity from 20 to 32 psu, and the pH between 7.5 and 8.3. Dissolved oxygen ranged from 5.3 to 7.8 ml/l. The maximum abundance of amphipods was observed during the pre-monsoon (July to September) in Vellar mangrove, and it was minimum during the pre-monsoon in Uppanar sea grass. It was found that several physicochemical factors, such as salinity, temperature, dissolved oxygen, pH, and the substrate have a marked effect on the distribution and the relative abundance of amphipods. The ranges of species diversity, richness, dominance, and evenness in the Vellar and Uppanar estuaries were 1.58–4.15, 1.82–5.29, 0–0.11, and 0.96–1, respectively. Using multivariate analyses, in each estuary, it was possible to identify different communities of amphipod species according to their habitats. 相似文献
No agreement has yet emerged from the negotiations on mineral commodities held under the Integrated Programme for Commodities (IPC), and there is little, if any, prospect for one in the near future. This article examines the reasons for this standstill and the underlying assumptions on which the IPC is based. The following points are raised: the premise that problems of individual commodities are mutually exclusive and can be dealt with in a single framework of measures is shown to be doubtful; the principle of a commodity-by-commodity approach can no longer remain unchallenged; and structural flaws in the negotiating machinery are manifest. However, results of negotiations have not been entirely negative: the need for two-tier preparatory negotiations has been accepted and a case for a permanent consultative body, perhaps covering several commodities, has been made out. Lack of substantive reciprocity, hence political discord, remains the stumbling-block. 相似文献
Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.
Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.
Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature. 相似文献
We have studied the genotoxic and apoptotic potential of ferric oxide nanoparticles(Fe_2O_3-NPs) in Raphanus sativus(radish).Fe_2O_3-NPs retarded the root length and seed germination in radish.Ultrathin sections of treated roots showed subcellular localization of Fe_2O_3-NPs,along with the appearance of damaged mitochondria and excessive vacuolization.Flow cytometric analysis of Fe_2O_3-NPs(1.0 mg/m L) treated groups exhibited 219.5%,161%,120.4% and 161.4% increase in intracellular reactive oxygen species(ROS),mitochondrial membrane potential(ΔΨm),nitric oxide(NO) and Ca2+influx in radish protoplasts.A concentration dependent increase in the antioxidative enzymes glutathione(GSH),catalase(CAT),superoxide dismutase(SOD) and lipid peroxidation(LPO) has been recorded.Comet assay showed a concentration dependent increase in deoxyribonucleic acid(DNA) strand breaks in Fe_2O_3-NPs treated groups.Cell cycle analysis revealed 88.4% of cells in sub-G1 apoptotic phase,suggesting cell death in Fe_2O_3-NPs(2.0 mg/m L) treated group.Taking together,the genotoxicity induced by Fe_2O_3-NPs highlights the importance of environmental risk associated with improper disposal of nanoparticles(NPs) and radish can serve as a good indicator for measuring the phytotoxicity of NPs grown in NP-polluted environment. 相似文献
The increased demand of alternative energy sources has created interest in biodiesel and biodiesel blends; biodiesel is promoted as a diesel substitute that is safer, produces less harmful combustion emissions, and biodegrades more easily. Like diesel spills, biodiesel can have deleterious effects on the aquatic environments. The effect of neat biodiesel, biodiesel blends, and diesel on Oncorhynchus mykiss and Daphnia magna was evaluated using acute toxicity testing. Static nonrenewal bioassays of freshwater organisms containing B100, B50, B20, B5, and conventional diesel fuel were used to compare the acute effects of biodiesel to diesel. Mortality was the significant end point measured in this study; percent mortality and lethal concentration (LC50) at different exposure times were determined from the acute toxicity tests performed. Trials were considered valid if the controls exhibited > 90% survival. Based on percentage of mortality and LC50 values, a toxicity ranking of fuels was developed. 相似文献