Characterization of semi-volatile organic compounds emitted during heating of nitrogen-containing plastics at low temperature

Because of recent volume increases, appropriate management of plastic recycling, which generates various organic compounds, is required to ensure the chemical safety of the processes. The processing temperature and resin type are the important factors determining both the efficiency of the processes and the emission of chemicals. Therefore, we studied the thermal degradation of various plastics at various temperatures from 70 to 300 °C under oxygen-present conditions to identify the semi-volatile organic compounds (SVOCs) emitted and to understand their thermal behaviors. The plastics examined were nitrogen-containing resins, such as polyamide 6, polyurethane, melamine formaldehyde, urea formaldehyde and acrylonitrile-butadiene-styrene. Major commodity plastics were also investigated for comparison. In total, more than 500 SVOCs were detected as emissions from plastics. While various nitrogen-containing SVOCs were detected from nitrogen-containing resins, the major commodity plastics released only these, which possibly were included as additives. These results indicate that the nitrogen atoms in the SVOCs emitted originated from the resins and additives, and not from ambient air at low temperature. As a result of the detection of raw materials, degradation chemicals and by-products of the polymers in the emissions, we found that the variation in chemical species is dependent on the resins. Additives were also emitted from all the resins, meaning that these chemicals were also released to the environment at the temperature examined. In most cases, the numbers and concentrations of SVOCs increased with increasing heating temperature. The variation of thermal behaviors of SVOCs was related to the origins and chemical species of SVOCs.     

Physicochemical properties of selected polybrominated diphenyl ethers and extension of the UNIFAC model to brominated aromatic compounds

The aqueous solubilities (S(w)) at various temperatures from 283 K to 308 K and 1-octanol/water partition coefficients (K(ow)) for four polybrominated diphenyl ethers (PBDEs: 4,4'-dibromodiphenyl ether (BDE-15), 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), and 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153)) were measured by the generator column method. The S(w) and K(ow) data revealed the effect of bromine substitution and basic structure on S(w) and K(ow). To estimate the infinite dilution activity coefficients (gamma(i)(w,infinity)) of the PBDEs in water from the S(w) data, enthalpies of fusion and melting points for those compounds were measured with a differential scanning calorimeter. Henry's Law constants (H(w)) of the PBDEs were derived from the determined gamma(i)(w,infinity) and literature vapor pressure data. Some physicochemical characteristics of PBDEs were also suggested by comparing the present property data with that of polychlorinated dibenzo-p-dioxins, brominated phenols and brominated benzenes in past studies. Furthermore, in order to represent different phase equilibria including solubility and partition equilibrium for other brominated aromatic compounds using the UNIFAC model, a pair of UNIFAC group interaction parameters between the bromine and water group were determined from the S(w) and K(ow) data of PBDEs and brominated benzenes. The ability of the determined parameters to represent both properties of brominated aromatics was evaluated.     

Catalyst durability in steam reforming of thermally decomposed waste wood

Thermal gasification and reforming technologies applicable over a wide temperature range were investigated for high efficiency and for the calorific value of the gas evolved from organic waste such as woody debris. The durability of the reforming catalyst and the availability of catalyst regeneration were investigated using laboratory-scale catalytic reformers and a gasifier. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. The results of woody waste gasification and reforming revealed the hydrogen concentration produced to be sustained at a high catalyst temperature of 1123 K, which prevented the catalyst from deactivating. The results also indicated that catalyst regeneration by air oxidation at the same temperature would be effective for enhancing catalytic activity.     

Disposition of bisphenol A in pregnant mice and fetuses after a single and repeated oral administration

The risk assessment of bisphenol A (BPA) on the development of offspring of humans is an important issue. There have been some reports on the fate of BPA in rodents, but information on the BPA level in fetal organs essential for the extrapolation to humans is inadequate. In the present study, we investigated the distribution pattern of ¹⁴C-BPA-derived radioactivity in fetal tissues following administration of 10?mg/kg ¹⁴C-BPA to the pregnant mice. The radioactivity was rapidly transferred through placenta and distributed to all fetal organs including reproductive organs and brains in a similar level. The concentration declined slowly compared with dams. Analysis of metabolites in fetuses showed that a fraction of BPA was unexpectedly large compared to the maternal blood. There was no clear effect of the fetal position in a uterus to influence the radioactivity concentration in whole fetuses. The dose dependence of pharmacokinetics should be recognized to extrapolate the pharmacokinetic result from animal experiments at high doses to humans at low doses. Similar experiments were conducted with an addition of two doses, 1 and 100?mg/kg, respectively. The pharmacokinetics seemed to be linear between 1 and 10?mg/kg, although at 100?mg/kg BPA was absorbed slowly and the radioactivity concentrations in fetuses were much higher than expected based on the linear dose dependence. Repeated doses were administered to pregnant mice since humans are exposed to BPA chronically. Radioactivity level in most of the fetal tissues on repeated administration was higher than single administration.     

Surrogate study for dioxins from municipal waste incinerator in startup condition: applicability as a dioxin control indicator and an organohalogen emission warning

Dioxins and their surrogates were continuously monitored during the startup of two municipal waste in cinerators (MWIs). The surrogates studied included low-volatility organohalogen compounds (LVOH) sampled by online systems, as well as chlorobenzenes (CBs) and chlorophenols (CPs). The changes in levels of LVOH, CBs, and CPs corresponded well with the trend of the toxicity equivalent quantity (TEQ). The correlation of LVOH with TEQ was fairly good, whereas that of CBs and CPs with TEQ was not consistent. The correlation of LVOH with TEQ involved a memory effect related to the delayed emission of less volatile compounds. The isomer analysis of the dioxins present under startup conditions showed evidence of the memory effect, i.e., highly chlorinated isomers were emitted slowly, whereas low-chlorinated isomers and LVOH decreased rapidly as the temperature rose. LVOH cannot act as a perfect dioxin surrogate, but it can give a versatile, quick, and comprehensive warning of the presence of organohalogen compounds because it is free from the memory effect and covers many kinds of organohalogen compounds, including dioxins.     

Characterization of compaction and CBR properties of recycled concrete aggregates for unbound road base and subbase materials in Vietnam

Journal of Material Cycles and Waste Management - Mechanical properties of recycled concrete aggregates (RCA) such as compaction and California bearing ratio (CBR) are important for application as...     

Process analysis of ozone formation under different weather conditions over the Kanto region of Japan using the MM5/CMAQ modelling system

We have assessed the contributions of individual physical and chemical atmospheric processes on ozone formation under different weather conditions during a typical summer month (August 2005) using the MM5/CMAQ modelling system. We found that the ozone episodes in the Kanto region are dominated by three major patterns, of which Patterns I and II are regular summertime pressure patterns with a 26% and 16% frequency of occurrence, respectively. A process analysis at two typical sites in the Kanto region – one located in the central region of Tokyo and the other located in the rural areas of Kanto – indicates that ozone formation is mainly controlled by advection, vertical diffusion, dry deposition, and chemical processes. The ground-level ozone concentrations are enhanced mainly by the vertical mixing of ozone-rich air from aloft, whereas the dry deposition and chemical processes mainly deplete ozone. By investigating the effects of each process under different weather conditions, we found that the significant decrease in ozone removal due to the chemical and advection processes under conditions of high stagnation is the most important cause of the enhanced levels of ozone in the central region of Tokyo. The results of this study can contribute to a better understanding of ozone formation in the Kanto region, and they may be valuable for local policy makers for further development planning.     

Bench-scale gasification of cedar wood – Part I: Effect of operational conditions on product gas characteristics

The present study was conducted within the framework of R&D activities on the development of gasification and reforming technologies for energy and chemical recovery from biomass resources. Gasification of the Japanese cedar wood has been investigated under various operating conditions in a bench-scale externally heated updraft gasifier; this was followed by thermal reforming. Parametric tests by varying the residence times, gasification temperatures, equivalence ratios (ERs) and steam-to-carbon (S/C) ratios were performed to determine their effects on the product gas characteristics. Thermodynamic equilibrium calculations were preformed to predict the equilibrium gas composition and compared with the experimental value.We found that the product gas characteristics in terms of the H₂/CO ratio, CO₂/CO ratio, and CH₄ and lighter hydrocarbons concentrations are significantly affected by the operating conditions used. Increasing the residence time decreased the CO₂/CO ratio; however, a nominal effect was noticed on H₂ concentration as a function of the residence time. At sufficient residence time, increasing the temperature led to higher H₂ yields, CO efficiency and higher heating value (HHV) of the product gas. The presence of steam during gasification effectively enhanced the proportion of H₂ in the product gas. However, higher S/C ratio reduced the HHV of the product gas. Increasing the ER from 0 to 0.3 increased the H₂ yields and CO efficiency and decreased the HHV of the product gas.The evolution of CH₄ and lighter hydrocarbons at low gasification temperatures was relatively higher than that at high temperature gasification. The evolution of CH₄ and lighter hydrocarbons at high gasification temperatures hardly varied over the investigated operating conditions.     

Characterization of temporal variations in landfill gas components inside an open solid waste dump site in Sri Lanka

A long-term monitoring of composition of landfill gases in the region with high rainfall was conducted using an argon assay in order to discuss air intrusion into the dump site. Gas samples were taken from vertical gas monitoring pipes installed along transects at two sections (called new and old) of an abandoned waste dump site in Sri Lanka. N₂O concentrations varied especially widely, by more than three orders of magnitude (0.046–140 ppmv). The nitrogen/argon ratio of landfill gas was normally higher than that of fresh air, implying that denitrification occurred in the dump site. Argon assays indicate that both N₂ and N₂O production occurred inside waste and more significantly in the old section. The Ar assay would help for evaluations of N₂O emission in developing countries.

Implications: A long-term monitoring of composition of landfill gases in the region with high rainfall was conducted using an argon assay in order to discuss air intrusion into the dump site. Argon assays indicate that both N₂ and N₂O production occurred inside waste and more significantly in the old section.