Toxicity and biodegradation of diamines

Phytotoxicity and cytotoxicity of 2,4-diaminotoluene (2,4-D), 4,4'-methylenedianiline (4,4-D), and 1,6-hexanediamine (1,6-D) were investigated by observing the germination of young radish seeds and the viability of HeLa cells, respectively. 2,4-D showed the highest, 4,4-D intermediate, and 1,6-D lowest cytotoxicity. However, the phytotoxicity decreased in the order of 4,4-D > 2,4-D > 1,6-D. Contrary to the results previously reported, in the modified Sturm test the activated sludge degraded 2,4-D and 4,4-D as well as 1,6-D without any pre-acclimation. Ochrobacterium antropi was isolated for degradation of 2,4-D and 4,4-D and Pseudomonas citronellolis for 1,6-D degradation. Thielevia sp. was isolated as 2,4-D degrading fungus and Aspergillus sp. as 4,4-D and 1,6-D degrading fungus. The fungi degraded the diamines faster than the bacteria.     

Cosolvent effects of alcohols on the Henry's law constant and aqueous solubility of tetrachloroethylene (PCE)

The effects of selected cosolvents ethyl alcohol (EtOH), isopropyl alcohol (IPA), and tertbutyl alcohol (TBA) on the Henry's law constant (H) of tetrachloroethylene (PCE) in aqueous solutions were investigated using the static headspace method. Alcohols in solution at a concentration around 20% and above acted as cosolvents increasing the aqueous solubility of PCE, which resulted in lower H values for PCE as compared to the value of H in deionized water. TBA, the most hydrophobic of the three alcohols, exhibited the strongest cosolvent effects, while EtOH had the weakest effects. A ln-linear relationship was observed between H and the volumetric fraction of alcohol added. Investigation of the solubilization of PCE in alcohol solutions confirmed the cosolvent trend observed for the three alcohols. A ln-ln relationship was observed between H and the enhanced solubility of PCE at a particular alcohol concentration. It was also observed that the value of H is a function of the enhanced solubility regardless of the type of cosolvent used. The results from this research further define the behavior of PCE in alcohol flooding solutions used in the remediation of PCE contaminated media.     

Bioaccumulation and critical body residue of PAHs in the amphipod,Diporeia spp: additional evidence to support toxicity additivity for PAH mixtures

Polycyclic aromatic hydrocarbons (PAHs) are considered to act additively when exposed as congener mixtures. Additive internal concentrations at the site of toxic action is the basis for recent efforts to establish a sum PAH guideline for sediment-associated PAH toxicity. This study determined the toxicity of several PAH congeners on a body residue basis in Diporeia spp. These values were compared to the previously established LR(50) value for a PAH mixture based on the molar sum of PAH congeners and demonstrated similar LR(50) values for individual PAH. These results support the contention that the PAH act at the same molar concentration whether present as individual compounds or in mixture. Aqueous exposures were conducted for 28 d, and the water was exchanged daily to maintain the exposure concentration. The concentration in the exposures declined by an average of 22% between water exchanges across all compounds, and ranged from 11% to 32%. The toxicokinetics were determined using both time-weighted-average (TWA) and time-variable water concentrations and were not statistically different between the two source functions. Toxicity was determined for both mortality and immobility (failure to swim on prodding) and on both a TWA water concentration and a body residue basis. The LC(50) values ranged from 1757 microg l(-1) for naphthalene after 10 d exposure to 79.1 microg l(-1) for pyrene after 28 d exposure, and the EC(50) ranged from 1587 microg l(-1) for naphthalene after 10 d exposure to 38.2 microg l(-1) for pyrene after 28 d exposure. The LR(50) values for all congeners at all lengths of exposure were essentially constant and averaged 7.5+/-2.6 micromol g(-1), while the ER(50) for immobility averaged 2.6+/-0.6 micromol g(-1). The bioconcentration factor declined with increasing exposure concentration and was driven primarily by a lower uptake rate with increasing dose, while the elimination remained essentially constant for each compound.     

Volatility of propoxur from different surface materials commonly found in homes

The purpose of this study was to determine the volatilization rates of propoxur from different surface materials commonly found in homes, and to conduct field measurements under ventilated and non-ventilated conditions. Since it is known that temperature, humidity and constant air flow most significantly affect volatility, various surface materials were sprayed using a constant amount of propoxur under the controlled conditions of an exposure chamber. Acetonitrile was used to desorb both XAD-2 resin that collected airborne propoxur and surface materials containing propoxur residue. HPLC was used to analyze propoxur concentrations. Based on multiple regression models, temperature most significantly affected volatility, followed by humidity. Volatilization rates of propoxur were highest from quartz surfaces and lowest from glass. Interaction was most readily found on glass surfaces based on humidity-air flow and humidity-temperature factors. In field applications, propoxur was sprayed in a room under two conditions with ventilation and without in order to measure the concentrations of propoxur in the air and on a quartz surface. Findings showed both airborne and settled concentrations peaked after a half hour then decreased under both conditions, both more sharply in the ventilated room. Under both conditions, no propoxur was detected on the quartz surface after three and a half hours but airborne concentrations remained detectable after thirty-three and one half hours. We conclude that to maintain good air quality, ventilation is important and special care must be taken when spraying insecticides on different surfaces.     

Catalytic wet oxidation of ammonia: why is N2 formed preferentially against NO3 -?

The role of catalyst and the reason for the preferential formation of N(2) in the catalytic oxidation reaction of ammonia in water over a Ru (3wt.%)/TiO(2) catalyst were elucidated. It was verified that the catalyst in the reaction had no direct relevance to the selective formation of N(2), but was responsible only for the oxidation of aqueous ammonia, NH(3)(aq), finally giving a molecule of nitrous acid. The preferential production of N(2) was experimentally demonstrated due to the homogeneous aqueous phase reaction of the nitrous acid-dissociated NO(2)(-) with NH(4)(+) ions. Even under the highly oxidizing condition, NO(2)(-) was much more likely to react with NH(4)(+) to form N(2) than being oxidized over the catalyst to NO(3)(-) as long as NH(4)(+) was available in solution.     

Formation of disinfection by-products in chlorinated swimming pool water.

The formation of five volatile disinfection by-products (DBPs: chloroform, bromodichloromethane, chloral hydrate, dichloroacetonitrile, and 1,1,1-trichloropropanone) by the chlorination of the materials of human origin (MHOs: hair, lotion, saliva, skin, and urine) in a swimming pool model system was examined. Chlorination reactions took place with a sufficient supply of chlorine residuals (0.84 mg Cl2/l < total chlorine < 6.0 mg Cl2/l) in 300 ml glass bottles containing either ground water or surface water as a reaction medium at 30 degrees C and pH 7.0, for either 24 or 72 h. A longer reaction period of 72 h or a higher content of organic materials led to the increased formation of DBPs. Of the DBPs formed by the reaction, chloroform was a major compound found in both ground and surface waters. The formation of chloroform and bromodichloromethane per unit total organic carbon (TOC) concentration was suppressed when all types of MHOs were added to the surface water that already contained DBP precursors such as humic substances. However, the formation of dichloroacetonitrile was promoted, probably due to the increased degradation reactions of nitrogen-containing compounds such as urea and proteins of human origin. In conclusion, the materials of swimmers' origin including hair, lotion, saliva, skin, and urine add to the levels of DBPs in swimming pool water, and any mitigation measures such as periodic change of water are needed to protect swimmers from elevated exposures to these compounds.     

烟酰胺降解菌的筛选及其降解特性

采用HPLC对某烟酰胺生产废水的主要成分进行分析，并模拟废水中的主要成分烟酰胺（nicotinamide）的浓度，对以烟酰胺为唯一碳源配制的培养基进行降解实验，获得有较佳降解率和生长能力的菌株YSI-1和YSI-2。结果表明．YSI菌株的混合菌降解效果优于单株菌，混合菌在初始OD600值为0．4，pH为7．0时，对浓度为2000mg／L的烟酰胺降解2d的降解率可达32．8％。延长处理时间或提高菌种的初始OD600值，烟酰胺的去除率均有较大的增加。     

Correlation of polychlorinated naphthalenes with polychlorinated dibenzofurans formed from waste incineration

Isomer composition of polychlorinated naphthalenes (PCNs) was measured for municipal waste incinerator fly ash samples and for emission samples produced from soot and copper-deposit experiments conducted at the United States Environmental Protection Agency (US-EPA). Two types of PCN isomer patterns were identified. One pattern contained specific PCN isomers in which chlorine atoms are substituted as if the peri(alpha-) position were dechlorinated from the higher chlorinated PCNs one by one. In another pattern, the isomers had a tendency for the chlorine atoms to assume successive positions on the naphthalene ring, which may be caused by specifically oriented chlorination. Some of these isomers increased, together with several polychlorinated dibenzofuran (PCDF) and a few polychlorinated dibenzo-p-dioxin (PCDD) isomers. The ratios between some specific PCN, PCDF, and PCDD isomers measured for the fly ash samples agree with those obtained from the soot and copper-deposit experiments. The observations suggest that these isomers were formed possibly from de novo synthesis utilizing the carbon structure contained in soot under the catalytic effect of a copper compound. Typical isomers for PCNs and PCDFs produced from incineration emissions were identified.     

Biosynthesis of lipds in zooplankton from Saanich Inlet,British Columbia,Canada

Lipid analyses were carried out on various species of zooplankton captured in Saanich Inlet, British Columbia, Canada, during September, 1972. The amphipod Cyphocaris challengeri had the highest level of lipid, consisting mainly of wax esters. The copepod Calanus pacificus had moderate amounts of lipid, with triglyceride as the major neutral lipid. The euphausiid Thysanoessa raschii contained mainly triglyceride in its moderate levels of neutral lipid, while wax esters and, to a lesser extent, triglycerides were present in the very small levels of neutral lipid in the chaetognath Sagitta elegans. The major fatty alcohols in wax esters of both Cyphocaris challengeri and Calanus pacificus were 20:1 and 22:1, although notable differences were found in the major fatty acids. Biosynthetic studies showed that phospholipids were labelled faster than neutral lipids in all species with both (U-¹⁴C) glucose and (1-¹⁴C) palmitic acid as precursors. Only species containing significant amounts of wax esters in their neutral lipids incorporated substantial amounts of radio-activity from (1-¹⁴C) palmitic acid into wax esters in (i) living animals, (ii) preparations containing fragments of tissue, (iii) cell-free systems. All species incorporated added fatty alcohols into wax esters in preparations containing tissue fragments and in cell-free preparations. Both the fatty acid and fatty alcohols of the wax esters of both Calanus pacificus and S. elegans were labelled from (1-¹⁴C) palmitic acid, consistent with de novo biosynthesis of the esters. (1-¹⁴C) hexadecanol was incorporated into wax esters almost entirely in the fatty alcohol moiety. It is concluded that all species examined formed was esters when presented with preformed fatty alcohols, but only those species that had wax esters as a major component of the neutral lipids were capable of de novo biosynthesis of the lipids.