Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

Development of a high-efficiency rotary dryer for sewage sludge

A rotary drum dryer having an internal rotating body was designed and tested in this study. It was shown that the developed dryer is effective for drying sewage sludge. The best operating conditions in the dryer were low energy input and almost 10% moisture content. The conditions are 255°C for the rotary drum temperature, 17 min for the sludge residence time, and 55 kg/m³ h for the dryer load. Under these conditions, the drying efficiency was 84.8%. The average diameter of dried sludge was less than 8 mm, and the weight reduction rate was 80%. Parametric screening studies achieved the following results. The drying efficiency increased with the increase of the internal temperature and the sludge residence time in the rotary drum, while the drying efficiency decreased when increasing the dryer load. In addition, it was shown that NH₃ and CO₂ were the primary components released from the sewage sludge drying process. The amounts of both of these components increased when the rotary drum temperature was increased.     

Improvement of thermal hydrolysis rate of dichloroacetic acid using alcohol

Dichloroacetic acid (DCAA) is produced during the oxidation of trichloroethylene. It is also produced in drinking water treatment as a disinfection by-product. DCAA is a problem material, because of its toxicity. The objective of this research is to find the final products and the reaction pathway of the DCAA decomposition by hydrolysis, and to increase the hydrolysis rate. The removal of both chlorine atoms in DCAA structure was achieved with hydrolysis at around 75 degrees C, and the final products were oxalic acid and glycolic acid. The reaction pathway was the production of oxalic acid and glycolic acid from two glyoxylic acid molecules by Cannizzaro reaction after the glyoxylic acid production from dechlorination of DCAA with hydrolysis. The hydrolysis rate of DCAA was increased with the use of 90% ethanol solution as solvent. The activation energy of DCAA was about 80 kJ/mol in it, while it was around 105 kJ/mol in water.     

Glass–ceramic from mixtures of bottom ash and fly ash

Along with the gradually increasing yield of the residues, appropriate management and treatment of the residues have become an urgent environmental protection problem. This work investigated the preparation of a glass–ceramic from a mixture of bottom ash and fly ash by petrurgic method. The nucleation and crystallization kinetics of the new glass–ceramic can be obtained by melting the mixture of 80% bottom ash and 20% fly ash at 950 °C, which was then cooled in the furnace for 1 h. Major minerals forming in the glass–ceramics mainly are gehlenite (Ca₂Al₂SiO₇) & akermanite (Ca₂MgSiO₇) and wollastonite (CaSiO₃). In addition, regarding chemical/mechanical properties, the chemical resistance showing durability, and the leaching concentration of heavy metals confirmed the possibility of engineering and construction applications of the most superior glass–ceramic product. Finally, petrurgic method of a mixture of bottom ash and fly ash at 950 °C represents a simple, inexpensive, and energy saving method compared with the conventional heat treatment.     

Real-world vehicle emissions: A summary of the 15th coordinating research council on-road vehicle emissions workshop

The Coordinating Research Council held its 15th workshop in April 2005, with nearly 90 presentations describing the most recent mobile source-related emissions research. In this paper, the authors summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emissions control programs, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Overtime work as the antecedent of employee satisfaction,firm productivity,and innovation

Overtime work has been blamed for the deterioration of employee satisfaction and productivity. However, the organization‐level implications of overtime work as a normative expectation remain unclear. In this study, such effects were analyzed through human capital theory and a causal attribution approach. Various organizational outcomes and boundary conditions were explored in explaining these implications. The analysis of time lagged data from 273 firms affirmed that a firm's overtime level was related negatively to employee satisfaction. However, it was positively related to the firm's productivity and curvilinearly (inverted U‐shaped) related to innovation. The effects of the firm's overtime level on firm productivity and innovation were also moderated by organizational trust. This study highlights the costs and benefits of overtime work as tools for utilizing human capital and reveals the critical contingency of organizational trust that enables firms to attenuate the costs of the overtime level and accentuate its potential benefits.     

Use of autotrophic sulfur-oxidizers to remove nitrate from bank filtrate in a permeable reactive barrier system

This study was conducted to evaluate the potential applicability of an in situ biological reactive barrier system to treat nitrate-contaminated bank filtrate. The reactive barrier consisted of sulfur granules as an electron donor and autotrophic sulfur-oxidizing bacteria as a biological component. Limestone was also used to provide alkalinity. The results showed that the autotrophic sulfur oxidizers were successfully colonized on the surfaces of the sulfur particles and removed nitrate from synthetic bank filtrate. The sulfur-oxidizing activity continuously increased with time and then was maintained or slightly decreased after five days of column operation. Maximum nitrate removal efficiency and sulfur oxidation rate were observed at near neutral pH. Over 90% of the initial nitrate dissolved in synthetic bank filtrate was removed in all columns tested with some nitrite accumulation. However, nitrite accumulation was observed mainly during the initial operation period, and the concentration markedly diminished with time. The nitrite concentration in effluent was less than 2 mg-N/l after 12 days of column operation. When influent nitrate concentrations were 30, 40, and 60 mg-N/l and sulfur content in column was 75%, half-order autotrophic denitrification reaction rate constants were 31.73 x 10(-3), 33.3 x 10(-3), and 36.4 x 10(-3) mg(1/2)/l(1/2)min, respectively. Our data on the nitrate distribution profile along the column suggest that an appropriate wall thickness of a reactive barrier for autotrophic denitrification may be 30 cm when influent nitrate concentration is less than 60 mg-N/l.     

Accumulation of butyl- and phenyltin compounds in starfish and bivalves from the coastal environment of Korea

Triphenyltin (TPT) and tributyltin (TBT) concentrations were determined in two starfish species (Asteria pectinifera and Asterias amurensis), bivalves (Crassostrea gigas or Mytilus edulis), and seawater samples from sites around the coasts of Korea. Both TPT and TBT concentrations in starfish ranged from 8 to 1560 ng/g and from <2 to 797 ng/g as Sn on a dry weight basis, respectively. TPT concentration accounted for 75.4% and 86.4% of total phenyltin concentration in A. pectinifera and A. amurensis, respectively, while monobutyltin, a degradation product of TBT, accounted for 86.3% and 57.2% of total butyltin, respectively. Triphenyltin concentrations in A. pectinifera were significantly correlated to water and bivalve TPT concentrations, which implies that dietary uptake of TPT from contaminated prey as well as direct uptake from surrounding water contribute to TPT body residues in the starfish. Starfish could be target organisms for monitoring TPT compound in the marine environment, due to their high accumulation and low degradation capacity towards TPT.