A survey of parabens in aquatic environments in Hanoi,Vietnam and its implications for human exposure and ecological risk

Environmental Science and Pollution Research - Seven parabens including methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), iso-propylparaben (iPrP), butylparaben (BuP), benzylparaben...     

Characterization of compaction and CBR properties of recycled concrete aggregates for unbound road base and subbase materials in Vietnam

Journal of Material Cycles and Waste Management - Mechanical properties of recycled concrete aggregates (RCA) such as compaction and California bearing ratio (CBR) are important for application as...     

Effect of biogeochemical interactions on bioaccessibility of arsenic in soils of a former smelter site in Republic of Korea

The total concentration-based regulations for soil remediation do not consider the possible changes in bioaccessibility of remaining arsenic (As) in soils due to biogeochemical interactions after remediation. This study used As-contaminated soil and pore water samples that were collected from the rice paddy and forest/farmland located in the vicinity of a former smelter site in Republic of Korea to elucidate the changes in As bioaccessibility due to biogeochemical interactions. Bioaccessibility and chemical forms of As in soils were determined by using an in vitro method and sequential extraction, respectively, and soil microbial community was evaluated. Bioaccessibility of As in the rice paddy soil samples was higher than that in the forest/farmland soil samples. This could be attributed to relatively higher dependence of bioaccessible As in the rice paddy soils on the soil concentration of iron (Fe), aluminum, or manganese, which could lead to greater changes in bioaccessible As via reductive dissolution. The strong linear relationship (R ² = 0.90, p value ≤0.001) between the pore water As and Fe concentrations, and the greater portion of bacterial species related to reductive dissolution of Fe oxides in the rice paddies can support the higher As bioaccessibility promoted by reductive dissolution. Therefore, it is necessary to consider the potential changes in the bioaccessible As due to biogeochemical interactions in remediation of As-contaminated soils, particularly when soils are likely to be reused under reductive dissolution-promoting conditions (e.g., flooded conditions).     

Passive air monitoring of PCBs and PCNs across East Asia: a comprehensive congener evaluation for source characterization

A comprehensive congener specific evaluation of polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) in the atmosphere was conducted across East Asia in spring 2008, applying polyurethane foam (PUF) disk passive air sampler (PAS) as monitoring device. Mean concentrations derived for Japan, China and Korea were 184 ± 24, 1100 ± 118, and 156 ± 20 pg m⁻³ for ∑₂₀₂ PCBs, and 9.5 ± 1.5, 61 ± 6, and 16 ± 2.4 pg m⁻³ for ∑₆₃ PCNs, respectively. Relative to reported data from 2004, the present results suggest that air PCBs concentrations have not changed much in Japan and Korea, while it has increased by one order of magnitude in China. From principal component analysis, combustion emerged highly culpable in contemporary emissions of both PCBs and PCNs across the East Asian sub-region. Another factor derived as important to air PCBs was re-emissions/volatilization. Signals from PCBs formulations were also picked, but their general importance was virtually consigned to the re-emissions/volatilization tendencies. On the contrary, counterpart PCNs formulations did not appear to contribute much to air PCNs.     

Application of phosphate-solubilizing bacteria for enhancing bioavailability and phytoextraction of cadmium (Cd) from polluted soil

In this study, phosphate-solubilizing bacteria (PSB), Bacillus megaterium, were used to enhance Cd bioavailability and phytoextractability of Cd from contaminated soils. This strain showed a potential for directly solubilizing phosphorous from soils more than 10 folds greater than the control without inoculation. The results of pot experiments revealed that inoculation with B. megaterium significantly increased the extent of Cd accumulation in Brassica juncea and Abutilon theophrasti by two folds relative to the uninoculated control. The maximum Cd concentrations due to inoculation were 1.6 and 1.8 mg Cd g⁻¹ plant for B. juncea and A. theophrasti after 10 wk, respectively. The total biomass of A. theophrasti was not significantly promoted by the inoculation treatment, yet the total biomass of B. juncea increased from 0.087 to 0.448 g. It is also worth to mention that B. juncea predominantly accumulates Cd in its stems (39%) whereas A. theophrasti accumulates it in its leaves (68%) after 10 wk. The change of the Cd speciation indicated that inoculation of B. megaterium as PSB increased the bioavailabilty of Cd and consequently enhanced its uptake by plants. The present study may provide a new insight for improving phytoremediation using PSB in the Cd-contaminated soils.     

Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Metabolites change of Scenedesmus obliquus exerted by AgNPs

With increasing emission of silver nanoparticles (AgNPs) into the environment, it is important to understand the effects of ambient concentration of AgNPs. The biological effects of AgNPs on Scenedesmus obliquus, a ubiquitous freshwater microalgae, was evaluated. AgNPs exerted a minor inhibitory effect at low doses. Non-targeted metabolomic studies were conducted to understand and analyze the effect of AgNPs on algal cells from a molecular perspective. During the 48?hr of exposure to AgNPs, 30 metabolites were identified, of which nine had significant changes compared to the control group. These include d-galactose, sucrose, and d-fructose. These carbohydrates are involved in the synthesis and repair of cell walls. Glycine, an important constituent amino acid of glutathione, increased with AgNP exposure concentration increasing, likely to counteract an increased intracellular oxidative stress. These results provide a new understanding of the toxicity effects and mechanism of AgNPs. These metabolites could be useful biomarkers for future research, employed in the early detection of environmental risk from AgNPs.     

Characterization of controlled-release KMnO4 (CRP) barrier system for groundwater remediation: a pilot-scale flow-tank study

Release and spreading of permanganate (MnO(4)(-)) in the well-based controlled-release potassium permanganate (KMnO(4)) barrier system (CRP system) was investigated by conducting column release tests, model simulations, soil oxidant demand (SOD) analyses, and pilot-scale flow-tank experiments. A large flow tank (L x W x D=8m x 4m x 3m) was constructed. Pilot-scale CRP pellets (OD x L=0.05 m x1.5m; n=110) were manufactured by mixing approximately 198 kg of KMnO(4) powders with paraffin wax and silica sands in cylindrical moulds. The CRP system (L x W x D=3m x 4m x 1.5m) comprising 110 delivery wells in three discrete barriers was constructed in the flow tank. Natural sands (organic carbon content=0.18%; SOD=3.7-11 g MnO(4)(-)kg(-1)) were used as porous media. Column release tests and model simulations indicated that the CRP system could continuously release MnO(4)(-) over several years, with slowly decreasing release rates of 2.5 kg d(-1) (day one), 109 g d(-1) (day 100), 58 g d(-1) (year one), 22 g d(-1) (year five), and 12 g d(-1) (year 10). Mean MnO(4)(-) concentrations within the CRP system ranged from 0.5 to 6 mg l(-1) during the 42 days of testing period. The continuously releasing MnO(4)(-) was gradually removed by SOD limiting the length of MnO(4)(-) zone in the porous media. These data suggested that the CRP system could create persistent and confined oxidation zone in the subsurface. Through development of advanced tools for describing agent transport and facilitating lateral agent spreading, the CRP system could provide new approach for long-term in situ treatment of contaminant plumes in groundwater.     

The effect of variability in industrial emissions on ozone formation in Houston, Texas

Ambient observations have indicated that high concentrations of ozone observed in the Houston/Galveston area are associated with plumes of highly reactive hydrocarbons, mixed with NO_x, from industrial facilities. Ambient observations and industrial process data, such as mass flow rates for industrial flares, indicate that the VOCs associated with these industrial emissions can have significant temporal variability. To characterize the effect of this variability in emissions on ozone formation in Houston, data were collected on the temporal variability of industrial emissions or emission surrogates (e.g., mass flow rates to flares). The observed emissions variability was then used to construct regionwide emission inventories with variable industrial emissions, and the impacts of the variability on ozone formation were examined for two types of meteorological conditions, both of which lead to high ozone concentrations in Houston. The air quality simulations indicate that variability in industrial emissions has the potential to cause increases and decreases of 10–52 ppb (13–316%), or more, in ozone concentration. The largest of these differences are restricted to regions of 10–20 km², but the variability also has the potential to increase regionwide maxima in ozone concentrations by up to 12 ppb.     

A high efficiency all glass sampling and concentration device for adsorptive semivolatile organics

A low-volume, inert sampling and enrichment device for semivolatile organic vapors is described. The device consists of two concentric fused silica capillaries. A small portion of the inter-capillary volume, cooled with a burst of compressed carbon dioxide, serves as a trap for the semivolatile organics. The low mass of the trap permits rapid sampling and desorption cycles suitable for applications requiring fast monitoring of semivolatile chemicals. The device is devoid of switching valves in the sampling train and consequently does not suffer from analyte loss due to irreversible adsorption or interference resulting from cross contamination. The device was successfully used for sampling low concentrations of highly adsorptive nitroaromatic compounds and is applicable for polychlorinated dibenzo-p-dioxins (PCDDs) and polyaromatic hydrocarbons (PAHs).