Optimizing electron spin resonance detection of hydroxyl radical in water

The parameters affecting the electron spin resonance (ESR) detection of hydroxyl free radical in water are studied and optimized. The hydroxyl radical is generated by the Fenton reaction with iron (II) ammonium sulfate and hydrogen peroxide reacting in a phosphate buffer using N-tert-butyl-alpha-phenylnitron as the spin trap. The concentrations of Fe²⁺, H₂O₂, and phosphate buffer are the parameters studied. The Taguchi method and the orthogonal experiment design were used to evaluate the effects of these parameters on the ESR signal intensity. By the analysis of the signal-to-noise ratio and the analysis of variance, the order of importance of the various parameters on the hydroxyl radical formation is determined for optimal ESR detection of hydroxyl radical. The results will help the development of water purification technologies using hydroxyl free radical as a green oxidant.     

Carbonaceous species in fine particles at the background sites in Korea between 1994 and 1999

Organic carbon (OC) and elemental carbon (EC) in fine particles (PM_2.5) at two background sites, Kosan and Kangwha in Korea were measured during intensive field studies between 1994 and 1999. Fine particles were collected on pre-fired quartz filters in a low-volume sampler and analyzed using the selective thermal oxidation method with MnO₂ catalyst. The OC and EC concentrations at Kosan located at western tip of Cheju Island in southern Korea are lower than those at Kangwha located at western coastal area in mid-Korean peninsula. Still, the OC concentrations at Kosan are generally higher than those at other background areas in Japan and USA. The EC concentrations at Kosan are lower than or comparable to those at other background areas. The total carbon (TC, sum of OC and EC) to EC ratio values at both sites were higher than those at other background areas in Japan and USA. At Kosan, the OC and EC concentrations when air parcels were from southern China were higher than those when air parcels were coming from northern China. However, at Kangwha, the differences were statistically not clear since most air parcels were from northern China. Except when air parcels were from the North Pacific during summer, the OC and EC concentrations are well correlated indicating that both OC and EC share the same emission/transport characteristics. From the gaseous hydrocarbon data and the OC and EC relationship, it was found that during summer local biogenic emissions of OC might be significant at Kosan.     

Performance of IUCN proxies for generation length

One of the criteria used by the International Union for Conservation of Nature (IUCN) to assess threat status is the rate of decline in abundance over 3 generations or 10 years, whichever is longer. The traditional method for calculating generation length (T) uses age‐specific survival and fecundity, but these data are rarely available. Consequently, proxies that require less information are often used, which introduces potential biases. The IUCN recommends 2 proxies based on adult mortality rate, = α + 1/d, and reproductive life span, = α + z^*RL, where α is age at first reproduction, d is adult mortality rate, RL is reproductive life span, and z is a coefficient derived from data for comparable species. We used published life tables for 78 animal and plant populations to evaluate precision and bias of these proxies by comparing and with true generation length. Mean error rates in estimating T were 31% for and 20% for , but error rates for were 16% when we subtracted 1 year ( ), as suggested by theory; also provided largely unbiased estimates regardless of the true generation length. Performance of depends on compilation of detailed data for comparable species, but our results suggest taxonomy is not a reliable indicator of comparability. All 3 proxies depend heavily on a reliable estimate of age at first reproduction, as we illustrated with 2 test species. The relatively large mean errors for all proxies emphasized the importance of collecting the detailed life‐history information necessary to calculate true generation length. Unfortunately, publication of such data is less common than it was decades ago. We identified generic patterns of age‐specific change in vital rates that can be used to predict expected patterns of bias from applying .     

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.     

Modeling urban solar energy with high spatiotemporal resolution: A case study in Toronto,Canada

This research presents a method to determine the maximum potential for the capturing of solar radiation on the rooftop of buildings in an urban environment. This involves the modeling of solar energy potential and comparison to historical building energy demand profiles through the use of 3-D solar simulation software tools and geographic information systems (GIS). The objective is to accurately identify the amount of surface area that is suitable for solar photovoltaic (PV) installations and to estimate the hourly PV electricity generation potential of existing building rooftops in an urban environment. This study demonstrates a viable approach for modeling urban solar energy and offers valuable information for electricity distributors, policy makers, and urban energy planners to facilitate the substantial design of a green built environment. The developed methodology is comprised of three main sections: (1) determination of suitable rooftop area, (2) determination of the amount of incident solar radiation available per rooftop, and (3) estimation of hourly solar PV electricity generation potential. A case study was performed using this method for Ryerson University, located in Toronto, Canada. It was found that solar PV could supply up to 19% of the study area’s electricity demands during peak consumption hours. The potential benefits of solar PV was also estimated based upon hourly greenhouse gas emission intensity factors as well as Time-of-Use (TOU) savings through the Ontario Feed-in-Tariff (FIT) program, which allows for better representation of the positive impacts of solar technologies.     

Sources and seasonal variation of PAHs in the sediments of drinking water reservoirs in Hong Kong and the Dongjiang River (China)

The main objective of this study was to investigate occurrence of polycyclic aromatic hydrocarbons (PAHs) in the sources of the drinking water supply of Hong Kong. The main emphasis was on the Dongjiang River in mainland China which is the major source, supplying 80% of the total consumption in Hong Kong (the remaining 20% is obtained from rain water). Sediments were collected from four sites along the Dongjiang River and four reservoirs in Hong Kong during both the dry and wet weather seasons. The concentrations of total PAHs in the sediments ranged between 36 and 539 microg/kg dry wt. The lower levels were detected at the upstream site on the Dongjiang River and at the reservoirs in Hong Kong (44-85 microg/kg dry wt), while the mid- and downstream sites on the Dongjiang River were more polluted (588-658 microg/kg dry wt). Examination of the PAH profiles revealed that the mid- and downstream sections of the Dongjiang River contained high percentages of 4,5,6-ring PAHs, similar to the amounts of atmospheric particulate matter and road dust collected during the dry weather season from the Pearl River Delta region as reported in the literature. Seasonal changes were revealed in the reservoirs of Hong Kong, with higher PAH levels in the wet weather season than in the dry weather season. For those reservoirs in Hong Kong that store water from the Dongjiang River, a distinct seasonal pattern was also observed, namely, that under dry weather season conditions the PAHs found in the sediments were primarily from petrogenic source, while under wet weather season conditions they were from pyrolytic sources. No such pattern was detected in the reservoirs which stored only rain water.     

Extinction rate of discovered and undiscovered plants in Singapore

Extinction is a key issue in the assessment of global biodiversity. However, many extinction rate measures do not account for species that went extinct before they could be discovered. The highly developed island city–state of Singapore has one of the best-documented tropical floras in the world. This allowed us to estimate the total rate of floristic extinctions in Singapore since 1822 after accounting for sampling effort and crypto extinctions by collating herbaria records. Our database comprised 34,224 specimens from 2076 native species, of which 464 species (22%) were considered nationally extinct. We assumed that undiscovered species had the same annual per-species extinction rates as discovered species and that no undiscovered species remained extant. With classical and Bayesian algorithms, we estimated that 304 (95% confidence interval, 213–414) and 412 (95% credible interval, 313–534) additional species went extinct before they could be discovered, respectively; corresponding total extinction rate estimates were 32% and 35% (range 30–38%). We detected violations of our 2 assumptions that could cause our extinction estimates, particularly the absolute numbers, to be biased downward. Thus, our estimates should be treated as lower bounds. Our results illustrate the possible magnitudes of plant extirpations that can be expected in the tropics as development continues.     

Germination, growth and gas exchange of selected boreal forest seedlings in soil containing oil sands tailings

Greenhouse experiments were conducted to determine the effects of soil enriched in fine tailings (FT), produced by the oil sands extraction, on germination, seedling growth and physiology of several plant species of the boreal forest. The germination of seeds was initially delayed by 15% FT in dogwood (Cornus stolonifera Michx) and jack pine (Pinus banksiana Lamb) but not in white spruce [Picea glauca (Moench) Voss]. In the second set of experiments we showed that all dogwood seedlings survived 6 months of treatment with 15% FT while the survival rates of raspberry, jack pine and white spruce seedlings were reduced to 44, 55 and 94%, respectively. FT reduced root and shoot dry weights in raspberry seedlings and the number of lateral shoots in jack pine and white spruce seedlings. In raspberry and jack pine seedlings, reductions of gas exchange were recorded. The results of our study suggest that the modifications of soil chemistry, texture and structure by FT may all contribute to the observed phytotoxic effects.     

Mussel-based monitoring of trace metal and organic contaminants along the east coast of China using Perna viridis and Mytilus edulis

Green lipped mussels, Perna viridis, and blue mussels, Mytilus edulis, were collected from seven locations along the east coast of China in September and October 2001. The mussel tissues were analyzed for metals (Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg), and trace organic contaminants including organochlorine compounds (OCs), polycyclic aromatic hydrocarbons (PAHs; based on 24 individual PAHs), polychlorinated biphenyls (PCBs) and petroleum hydrocarbons (PHCs). Maximum concentrations of Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg in the mussel tissues were 0.14, 26.76, 5.31, 15.72, 4.78, 2.93, 7.40, 231.0, 54.17, 1002 and 317.3 microg/g dry weight respectively. Levels of DDTs, PAHs, PCBs and PHCs in the mussel samples were 14-640, 456-3495, 1-13 ng/g and 621-2863 microg/g dry weight, respectively. Results of this study indicated that contaminant levels were, in general, higher or at least comparable to those reported in other local or regional studies. Mussel samples collected in Chongming Dao in Shanghai and Jiao Zhou Wan in Qingdao had significantly higher levels of metal and trace organic contaminants among the seven sampling stations. Examination of the contaminant profiles suggests that PHCs originated from petrogenic sources, while both petrogenic and pyrolytic sources were important for PAHs. The generally high levels of metals and organochlorine compounds are probably the result of increasingly intense industrial activities along the east coast of China. An assessment of potential risks to human health due to consumption of the mussels was undertaken for the metals, PCBs, DDTs and chlordanes, and the results indicated that all metals, except Ni, could pose a health risk to heavy seafood consumers, while Hg appears to be of concern even for low level consumers.