Quantifying the human health benefits of curbing air pollution in Shanghai

Urban development in the mega-cities of Asia has caused detrimental effects on the human health of its inhabitants through air pollution. However, averting these health damages by investing in clean energy and industrial technologies and measures can be expensive. Many cities do not have the capital to make such investments or may prefer to invest that capital elsewhere. In this article, we examine the city of Shanghai, China, and perform an illustrative cost/benefit analysis of air pollution control. Between 1995 and 2020 we expect that Shanghai will continue to grow rapidly. Increased demands for energy will cause increased use of fossil fuels and increased emissions of air pollutants. In this work, we examine emissions of particles smaller than 10 microm in diameter (PM10), which have been associated with inhalation health effects. We hypothesize the establishment of a new technology strategy for coal-fired power generation after 2010 and a new industrial coal-use policy. The health benefits of pollution reduction are compared with the investment costs for the new strategies. The study shows that the benefit-to-cost ratio is in the range of 1-5 for the power-sector initiative and 2-15 for the industrial-sector initiative. Thus, there appear to be considerable net benefits for these strategies, which could be very large depending on the valuation of health effects in China today and in the future. This study therefore provides economic grounds for supporting investments in air pollution control in developing cities like Shanghai.     

Evaluating the Efficiency of Coagulation in the Removal of Dissolved Organic Carbon from Reservoir Water using Fluorescence and Ultraviolet Photometry

The present study used ultraviolet absorption (UVa) and the florescence intensity (FI) to evaluate the coagulation efficiency for removing dissolved organic carbon (DOC) in the raw water from Min-Ter, Li-Yu-Ten and Yun-Ho-Shen reservoirs in Taiwan. The results indicated that the ratio of DOC removal rate and FI removal rate was maintained at about 1 at various coagulant dosages. However, the ratio of DOC removal rate and UVa removal rate decreased as the coagulant dosage increased. In addition, after coagulation, the use of florescence intensity instead of total organic carbon (TOC) is better than UVa for measuring the DOC removal rate of the raw waters gathered in different months from the three reservoirs. Furthermore, a good linear relationship between florescence intensity and DOC removal rate was observed, and the DOC/FI ratio of raw water from each reservoir can be used to predict the DOC residual concentration after enhanced coagulation. This result shows that fluorescence analysis can be used for on-line and continuous monitoring the effectiveness of organic matter removal in water treatment.     

Assessment of the bioavailability of cadmium in Jamaican soils

Extraordinary geogenic concentrations of cadmium (Cd) have been reported for some Jamaican soils. However, the bioavailability of the metal in these soils remains unknown. Here, the bioavailability of Cd in selected Jamaican soils was investigated through the determination of total and sequentially extractable concentrations in paired soil–plant (yam; Dioscorea sp.) samples (n?=?24), using neutron activation analysis and atomic absorption spectroscopy as primary analytical techniques. Our results indicate that total soil Cd varied widely (2.2–148.7 mg kg^?1), and on average, total extractable Cd accounted for ~55 % of the total soil Cd. The exchangeable and oxidizable species averaged 1.5 and 6.4 % of the total Cd, respectively, and, based on Spearman analysis, are the best predictors of yam Cd. There is also good evidence to suggest that variation in the bioavailability of the metal is in part controlled by the geochemical characteristics of the soils analyzed and is best explained by pH, cation exchange capacity (CEC) and organic matter content (% LOI).     

Is an assessment factor of 10 appropriate to account for the variation in chemical toxicity to freshwater ectotherms under different thermal conditions?

Ecotoxicity tests are often conducted following standard methods, and thus carried out at a fixed water temperature under controlled laboratory conditions. Yet, toxicity of a chemical contaminant may vary in a temperature-dependent manner, depending on the physiology of the test organism and physicochemical properties of the chemical. Although an assessment factor of 10 (AF10) is commonly adopted to account for variability in toxicity data related to temperature in the development of water quality guidelines and/or ecological risk assessment, no one has ever rigorously assessed the appropriateness of AF10 to account for potential variation in temperature-dependent chemical toxicity to aquatic organisms. This study, therefore, aims to address this issue through a meta-analysis by comparing median lethal concentration data for nine chemicals (cadmium, copper, nickel, lead, silver, zinc, arsenic, selenium and DDT) on a range of freshwater ectothermic animal species at different temperatures, and to assess whether AF10 is under- or over-protective for tropical and temperate freshwater ecosystems. Our results reveal varying extents of interaction between temperature and different chemicals on organisms and the complexity of these interactions. Applying AF10 sufficiently protects 90 % of the animal species tested over a range of temperatures for cadmium, copper, nickel, silver, zinc and DDT in the tropics, but it is insufficient to adequately encompass a larger temperature variation for most studied chemicals in temperate regions. It is therefore important to set specific AFs for different climatic zones in order to achieve the desired level of ecosystem protection.     

Feasibility of using microalgal biomass cultured in domestic wastewater for the removal of chromium pollutants

The feasibility of obtaining and using the biomass of a microalga, Chlorella miniata, from domestic wastewater (DW) cultures for the removal of chromium(III) [Cr(III)] and chromium(VI) [Cr(VI)] was compared with that from commercial Bristol medium (BM). Results showed that Chlorella miniata cultured in DW under 16-8 hours light-dark cycle [DW(16-8)] had similar growth to that in BM [BM(16-8)], but these two biomass had different biochemical compositions, and the former one had lower carbohydrate and higher protein content. When cultured in domestic wastewater, a higher biomass was obtained under continuous illumination [DW(24-0)], and the cells had higher carbohydrate and lower protein concentrations than that of DW(16-8). The spectra of the Fourier transform infrared spectrometer revealed that the functional groups on the surface of the three kinds of biomass--DW(16-8), DW(24-0), and BM(16-8)--were comparable, except an additional peak at 1731 cm(-1) was found in the biomass cultured in domestic wastewater, which was probably the result of bacterial contamination. Although biochemical differences were found among the three kinds of microalgal biomass, similar biosorption performances to chromium pollutants were recorded, with approximately 75% Cr(III) and 100% Cr(VI) removed at equilibrium in Cr(III) and Cr(VI) experiments, respectively, when dead biomass was used as a biosorbent. Therefore, it is possible to culture Chlorella miniata in domestic wastewater and use the biomass for the removal of chromium pollutants.     

Evaluation of the thermal/optical reflectance method for quantification of elemental carbon in sediments

The IMPROVE thermal/optical reflectance (TOR) method, commonly used for EC quantification in atmospheric aerosols, is applied to soils and sediments and compared with a thermochemical method commonly applied to these non-atmospheric samples. TOR determines elemental carbon (EC) by an optical method, but it also yields thermally defined EC fractions in a 2% O2/98% He oxidizing atmosphere at 550 degrees C (EC1), 700 degrees C (EC2), and 800 degrees C (EC3). Replicate TOR TC, OC, and EC values exhibited precisions of approximately +/-10% as determined from multiple analyses of the same samples. EC abundances relative to total mass concentrations were within the ranges reported by other methods for diesel exhaust soot, n-hexane soot, wood and rice chars, and coals, as well as for environmental matrices. A direct comparison with the chemothermal (CTO) method of Gustafson et al. for ten soil and sediment samples demonstrated that almost all of the OC and EC1 are eliminated, as is part of the EC2. The CTO soot carbon is bounded by the EC3 and EC2+EC3 fractions of the IMPROVE TOR analysis. It might be possible to adjust these fractions to obtain better agreement between atmospheric aerosol and soil/sediment analysis methods. Given its linking the EC measurement in the atmosphere to sediments, the TOR method will not only provide useful information on the explanation and comparison between different environmental matrices, but also can be used to derive information on global cycling of EC.     

Use of Chitosan as Coagulant to Treat Wastewater from Milk Processing Plant

Chitosan is a natural high molecular polymer made from crab, shrimp and lobster shells. When used as coagulant in water treatment, not like aluminum and synthetic polymers, chitosan has no harmful effect on human health, and the disposal of waste from seafood processing industry can also be solved. In this study the wastewater from the system of cleaning in place (CIP) containing high content of fat and protein was coagulated using chitosan, and the fat and the protein can be recycled. Chitosan is a natural material, the sludge cake from the coagulation after dehydrated could be used directly as feed supplement, therefore not only saving the spent on waste disposal but also recycling useful material. The result shows that the optimal result was reached under the condition of pH 7 with the coagulant dosage of 25 mg/l. The analysis of cost-effective shows that no extra cost to use chitosan as coagulant in the wastewater treatment, and it is an expanded application for chitosan.