Prospects for a self-sustainable sewage treatment system: a case study on full-scale UASB system in India's Yamuna River Basin

The government of India decided to launch a project to implement 16 full-scale Upflow Anaerobic Sludge Blanket (UASB) reactors (with a total capacity of 598,000 m(3)/d) in the Yamuna River basin under its Yamuna Action Plan (YAP). A polishing pond called the Final Polishing Unit (FPU) was utilized for post-treatment. This paper evaluates the sewage treatment efficiency of the combined system of full-scale UASB reactors and polishing ponds under Indian climatic conditions. Results have shown that the effluent from the sewage treatment plants (STPs) investigated failed to comply with applicable discharge standards in terms of BOD, SS, and fecal coliform removal. Therefore, it is proposed that such proper operation and maintenance as removing excess sludge and scum be conducted in order to increase treatment efficiency. Moreover, trained and experienced workers are also required to operate and maintain the systems, along with a scientific approach.     

Addressing sustainability through waste management: a perspective from higher education institutions in Southeast Asia

Journal of Material Cycles and Waste Management - Waste management is vital for global sustainable development. Sustainable development goals of a country would not be achieved if the waste...     

Apportionment of TEQs from four major dioxin sources in Japan on the basis of five indicative congeners

The major sources of dioxins (polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs)) in the environment in Japan have been considered to be combustion by-products, pentachlorophenol (PCP) formulations, chlornitrofen (CNP, 4-nitrophenyl-2,4,6-trichlorophenyl ether) formulations, and PCB products. Data on PCDDs, PCDFs and DL-PCBs from the four sources were analyzed, and indicative congeners whose concentrations were highly correlated with WHO-2006 toxic equivalencies (TEQs) were identified for each source sample. The indicative congeners for combustion by-products, PCP formulations, and CNP formulations were 2,3,4,7,8-pentachlorodibenzofuran, 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin, and 1,2,3,7,8-pentachlorodibenzo-p-dioxin, respectively; for PCB products, the indicative congeners were IUPAC Nos. #126- and #105-pentachlorobiphenyls. Moreover, using the data on PCDDs, PCDFs and DL-PCBs, we developed a set of equations for estimating the apportionment of TEQs from the four sources by using only the concentrations of the above-mentioned five indicative congeners. The equations were used along with the analysis results of different types of environmental samples collected from Japan, to determine the TEQ contributions of the four sources. The obtained values of TEQ contributions seemed to be reasonable. The estimation method was developed by using the data on major dioxin sources in Japan, and therefore, it is generally adaptable to environmental samples from any part of Japan. The method may be usable for regions outside Japan if source identification is carried out and the estimation equations are modified appropriately.     

Evaluation of pressurized liquid extraction for determination of organophosphorus and pyrethroid pesticides in soybean

The purpose of this study was to develop an analytical method for the determination of organophosphorus and pyrethroid pesticides in soybean by pressurized liquid extraction (PLE). Two organic solvents, acetone and acetonitrile, were evaluated as extraction solvents. In both cases, the amount of extract was enhanced with increasing extraction temperature. The extracts obtained using acetonitrile were measured by gas chromatography/mass spectrometry after a cleanup process based on the analytical method for the Japanese Positive List System for Agricultural Chemicals Remaining in Foods. The effect of extraction temperature (range: 40- 130°C) on extraction efficiency was evaluated by a recovery study using 21 organophosphorus pesticides and 10 pyrethroid pesticides as target analytes and acetonitrile as the solvent. The results indicated that at 130°C, some organophosphorus pesticides might be degraded, whereas extraction temperatures between 70°C and 100°C were optimal. Next, a prepared sample containing fenitrothion and permethrin was analyzed. Although the sample was not soaked in water prior to analysis, PLE provided analytical results comparable to those obtained by solvent extraction with homogenization. Therefore, PLE is considered a simple and alternative technique for the extraction of organophosphorus and pyrethroid pesticides in soybean.     

Maternal exposure to high levels of dioxins in relation to birth weight in women affected by Yusho disease

Background

Studies on the association of maternal exposure to polychlorinated dibenzo-p-dioxin (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) with decreased birth weight in humans have produced conflicting results. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease.

Objective

The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on birth weight.

Methods

Blood samples, obtained from 101 Yusho women (190 births) who gave birth after exposure, were analyzed for congeners of seven PCDDs, ten PCDFs, and four non-ortho PCBs.

Results

Total PCDD TEQ (adjusted beta = − 161.9 g; 95% CI, −265.3 to − 58.6), total PCDF TEQ (adjusted beta = − 105.9 g; 95% CI, −179.5 to − 32.2), and total non-ortho PCBs (adjusted beta = − 178.4 g; 95% CI, −318.3 to − 38.5) levels were inversely associated with birth weight. Significant inverse associations with birth weight were also found for total PCDD TEQ, total PCDF TEQ, and total non-ortho PCB TEQ levels among male, but not female, infants. Significant inverse associations with birth weight were also found for nine congeners among all infants; the adjusted beta coefficients were largest for 1,2,3,6,7,8-HxCDD and smallest for 2,3,4,7,8-PeCDF.

Conclusion

In the setting of exposure to high levels of dioxins, maternal blood levels of PCDDs, PCDFs and PCBs are associated with lower birth weight in Yusho patients. The association exhibited gender-specific differences, as male infants are more susceptible than females to growth restriction induced by in utero dioxin exposures.     

Comparison of the concentrations of polychlorinated biphenyls and dioxins in mothers affected by the Yusho incident and their children

Accumulated maternal dioxins are passed onto the fetus and neonate via the placenta and maternal milk. In Japan in 1968, an accidental human exposure to rice oil contaminated with polychlorinated biphenyls (PCBs) and other dioxin-related compounds, such as polychlorinated dibenzofurans (PCDFs), led to development of Yusho oil disease. We investigated differences in blood dioxin concentrations in mother-children pairs affected by the Yusho incident. From 2002 to 2008, blood samples were collected from 26 pairs of Yusho mothers and their children (19 mothers, 26 children). Specific congeners of seven polychlorinated dibenzo-p-dioxins (PCDDs), ten PCDFs, and four non-ortho PCBs were analyzed. The children had significantly lower TEQ concentrations of PCDDs, PCDFs, and coplanar PCBs compared to their mothers. The mother-child difference in blood concentrations varied with the congeners; the largest for 2,3,4,7,8-pentaCDF and the smallest for 1,2,3,4,6,7,8-heptaCDD. The level for 2,3,4,7,8-pentaCDF, which characterizes Yusho oil disease, was approximately 17-30 times higher in the mothers than in the general population, whereas there were no significant differences between children in the formula-fed group and the general population. In contrast, the mean level for 2,3,4,7,8-pentaCDF in the breast-fed group was approximately 1.5 times, (range 0.5-6.5 times) higher than that in the general population. Over 30 years after the Yusho incident, the mean blood dioxin levels in the offspring were only a fraction of the levels in their mothers. This is more consistent with exposure via breast milk than via transplacental transfer in the Yusho incident.     

Compound-specific isotopic and congener-specific analyses of polychlorinated biphenyl in the heat medium and rice oil of the Yusho incident

Compound-specific isotope analysis (CSIA) can be used to examine the source and transformation processes of organic pollutants in the environment. We performed a carbon stable isotope analysis of polychlorinated biphenyl (PCB) congeners in the PCB heat-transfer medium (heat medium) and the original Kanechlor-400 (KC-400, a commercial brand of PCBs) involved in the Yusho incident. The main purpose is to investigate whether isotope fractionation occurred in the rice oil deodorization process that caused the incident. The carbon isotope ratios (δ¹³C values) of the targeted PCB congeners ranged from ? 29.39 to ? 27.00‰ in the heat medium and from ? 28.77 to ? 27.05‰ in the original KC-400. No significant differences were found in the δ¹³C values, suggesting carbon isotope fractionation did not occur for the targeted PCB congeners in the heat medium when deodorization of rice oil occurred at temperatures above 200 °C. Furthermore, we also conducted a congener-specific analysis of 64 PCB congeners found in the heat medium and rice oil contaminated by it. The total PCB congener concentrations were 503 mg/g in the heat medium and 81 μg/g in the rice oil. The concentrations of the highly chlorinated congeners were significantly lower in the heat medium than in the original KC-400, and the compositional ratios of the lowly chlorinated congeners were relatively lower in the rice oil than in the heat medium. These results suggest that the PCB congener patterns gradually changed from that of the original KC-400 in the deodorization process and subsequent contamination into the rice oil. Thus, a combination of CSIA and congener-specific analysis is a new approach for investigating the changing PCB congener profiles in samples from the Yusho incident.     

Thermal destruction of wastes containing polychlorinated naphthalenes in an industrial waste incinerator

A series of verification tests were carried out in order to confirm that polychlorinated naphthalenes (PCNs) contained in synthetic rubber products (Neoprene FB products) and aerosol adhesives, which were accidentally imported into Japan, could be thermally destroyed using an industrial waste incinerator. In the verification tests, Neoprene FB products containing PCNs at a concentration of 2800 mg/kg were added to industrial wastes at a ratio of 600 mg Neoprene FB product/kg-waste, and then incinerated at an average temperature of 985 °C. Total PCN concentrations were 14 ng/m³N in stack gas, 5.7 ng/g in bottom ash, 0.98 ng/g in boiler dust, and 1.2 ng/g in fly ash. Destruction efficiency (DE) and destruction removal efficiency (DRE) of congener No. 38/40, which is considered an input marker congener, were 99.9974 and 99.9995 %, respectively. The following dioxin concentrations were found: 0.11 ng-TEQ/m³N for the stack gas, 0.096 ng-TEQ/g for the bottom ash, 0.010 ng-TEQ/g for the boiler dust, and 0.072 ng-TEQ/g for the fly ash. Since the PCN levels in the PCN destruction test were even at slightly lower concentrations than in the baseline test without PCN addition, the detected PCNs are to a large degree unintentionally produced PCNs and does not mainly stem from input material. Also, the dioxin levels did not change. From these results, we confirmed that PCNs contained in Neoprene FB products and aerosol adhesives could be destroyed to a high degree by high-temperature incineration. Therefore, all recalled Neoprene FB products and aerosol adhesives containing PCNs were successfully treated under the same conditions as the verification tests.     

Performance and efficiency of removal of pharmaceutical compounds from hospital wastewater by lab-scale biological treatment system

The fate of pharmaceuticals after discharged from hospital into wastewater was clarified experimentally by using a new lab-scale conventional activated sludge (CAS) treatment reactor. The 43 target compounds belong to nine therapeutic classes (antivirals, antibacterials, anticancer drugs, psychotropics, antihypertensives, analgesic–antipyretics, contrast media, herbal medicines, and phytoestrogens) were selected with inclusion of 16 newly estimated compounds. The efficiency of the present reactor was estimated by comparing the reaction rate constant of the solid-water partition coefficients (log K_d) between liquid and solid samples and half-life during 48-h experiment obtained by using hospital effluents with those obtained by using STP wastewater. The results that no significant difference in removal efficiency was observed between both water samples (P?>?0.05) indicate high reliability of the present lab-scale reactor. The actual rates of removal when hospital effluent was applied varied widely (mean, 59?±?40%) independent of type of the pharmaceuticals. More than 90% of 17 compounds were removed after 8 h of treatment. However, the values for psychotropics (mean, 19?±?26%) and contrast media (mean, 24?±?17%) were generally low, indicating high stability. The log K_d values ranged from 1.3 to 4.8. Notably, clarithromycin, acridine, and glycitein could be removed in both liquid and solid phases. The dominant removal mechanisms were found to be different for individual pharmaceutical. These results suggest the effectiveness of introduction of the lab-scale biological treatment system for development of a new solution for discharge of pharmaceuticals from hospital.