Distribution of inorganic bromine and metals during co-combustion of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS) wastes containing brominated flame retardants (BFRs) with metallurgical dust

This study focused on the thermal degradation of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS), containing different brominated flame retardants. The evolved inorganic bromine was utilized for the separation of metals present in electric arc furnace dust (EAFD). The thermal degradation of BrPC generated inorganic gaseous HBr (69%) and condensable Br₂ (31%). The bromine evolved from BrHIPS was detected almost entirely in a condensed phase as SbBr₃. When mixed with EAFD, the evolved inorganic bromine reacted immediately with the metallic components of zinc and lead, but not with iron. The best bromination efficiencies were obtained during the isothermal heating (80 min at 550 °C) of the mixtures at mass ratios of 6:1 and 9:1 w/w under oxidizing conditions. The achieved brominating rates reached 78 and 81% for zinc and 90 and 94% for lead in 6:1 and 9:1 BrPC:EAFD, respectively, and 47 and 65% for zinc and 67 and 63% for lead in 6:1 and 9:1 BrHIPS:EAFD, respectively. The oxidizing condition favored complete vaporization of the formed bromides.     

The dynamics of mercury around an artisanal and small-scale gold mining area,Camarines Norte,Philippines

Environmental Science and Pollution Research - To elucidate the dynamics of mercury emitted and released by artisanal and small-scale gold mining (ASGM) activity and to estimate its impact on the...     

Tracer transport model at Japan meteorological agency and its application to the ETEX data

This paper describes the JMA tracer transport model and its sensitivity to model physics and initial conditions by using the ETEX data. Compared with observations, the model overestimates ground-level concentration in the early stage within about one day from the emission, possibly due to underestimation of vertical diffusion. In the early stage, the enhanced vertical diffusion effectively transports the tracer upward and decreases the ground-level concentration, while in the later stage, it enhances downward transports from the upper layer and increases the ground-level concentration. A conceptual model is given for understanding the vertical transport due to vertical diffusion. The horizontal diffusion introduced to the model has preferable impacts on forecasts especially in the early stage. Finally, we discuss the predictability of this model based on sensitivity to initial conditions of emission time and height.     

Concentration and distribution of dioxins and related compounds in human tissues

Polychlorinated dibenzo-p-dioxin, polychlorinated dibenzofuran and dioxin-like polychlorinated biphenyl concentrations in human blood, lung, liver, bile, pancreas, spleen, kidney and mesentery fat were determined to assess the concentrations and distribution of these chemicals in human tissues from 20 donors. The mean TEQ concentrations in blood, lung, liver, bile, spleen, pancreas, kidney and mesentery fat were 119, 178, 228, 50, 113, 163, 138 and 139 pg TEQ/g lipid, respectively. Parallel levels were seen in the blood, spleen, kidney and mesentery fat; in the lungs and pancreas, the levels were somewhat higher. Among the organ tissues samples, the highest concentration was observed in the liver and the lowest in the bile. Mean total-TEQ concentration of the liver was about 4.5 times higher than that of bile. Positive correlations were observed among the concentrations of dioxins in various tissues. However, the concentrations in bile were not correlated with any tissues. It is suggested that the distribution behavior of dioxin-like congeners in human tissues varies among tissues and the kinds of congeners ingested. To evaluate the relationship between the accumulation levels of dioxins and their pathophysiological significance or risk, data must be accumulated from a more extensive group of human samples.     

The stability of butyltin compounds in a dredged heavily-contaminated sediment

A treatment process for marine sediment heavily contaminated with tributyltin (TBT) was designed that included dehydrating, sunlight drying and dumping processes. The time course in butyltin (BTs) compounds, TBT, dibutyltin (DBT) and monobutyltin concentrations were investigated in the sediment treated under various conditions (light (UV, sunlight and light exclusion), moisture (air-drying and water saturation) and wetting and drying cycles). Significant changes in all the BT compound concentrations with time were not found regardless of the sediment conditions for light and moisture. The results indicated the high stabilities of TBT and DBT in the sediments versus light and moisture condition changes, probably taking place in the treatment process. It is also estimated that the BTs in the sediment are resistant to photo-degradation and biochemical degradation and their half lives are relatively long. In contrast, the decreases in the TBT and DBT were observed during the wetting and drying cycle treatment for the water saturated sediment both during exposure to sunlight and under a dark condition. This result suggested the hypothesis that the TBT degradation could be accelerated by the high microbial activity induced by the moisture changing treatments.     

Exposure assessment for trace elements from consumption of marine fish in Southeast Asia

Concentrations of 20 trace elements were determined in muscle and liver of 34 species of marine fish collected from coastal areas of Cambodia, Indonesia, Malaysia and Thailand. Large regional difference was observed in the levels of trace elements in liver of one fish family (Carangidae): the highest mean concentration was observed in fish from the Malaysian coastal waters for V, Cr, Zn, Pb and Bi and those from the Java Sea side of Indonesia for Sn and Hg. To assess the health risk to the Southeast Asian populations from consumption of fish, intake rates of trace elements were estimated. Some marine fish showed Hg levels higher than the guideline values by U.S. Environmental Protection Agency and Joint FAO/WHO Expert Committee on Food Additives (JECFA). This suggests that consumption of these fish may be hazardous to the people.     

Remediation of cadmium-contaminated paddy soils by washing with calcium chloride: verification of on-site washing

We developed a new, three-step soil-wash method to remediate Cd-contaminated paddy fields. The method comprises (1) chemically washing the field soil with a CaCl2 solution; (2) washing the treated soil with water to eliminate residual Cd and CaCl2; and (3) on-site treatment of wastewater using a portable wastewater treatment system. Cd concentrations in the treated water were below Japan's environmental quality standard (0.01 mg Cd L-1), and the removal of Cd from the exchangeable fraction was 55% and from the acid-soluble fraction 15%. While soil fertility properties were affected by the soil washing, adverse effects were not crucial and could be corrected. The washing had no affect on rice growth, and reduced the average Cd concentration in rice grains by about two-thirds compared to a control plot. These results confirmed the effectiveness of the soil-wash method in remediating Cd-contaminated paddy fields.     

Mercury and its relation with selenium in the liver of Dall's porpoises (Phocoenoides dalli) off the Sanriku coast of Japan

Liver samples of 22 Dall's porpoises (Phocoenoides dalli) collected off the Sanriku coast of Japan were analyzed for investigation on bioaccumulation of total mercury (SigmaHg), organic mercury (OrgHg), inorganic mercury (InHg) and selenium (Se). In the liver, detoxification of Hg was evident by transformation of OrgHg. Se showed different Hg detoxification patterns in the liver with a threshold range of hepatic SigmaHg concentration of about 20-30 microg/g dry weight. The molar ratios of Se/InHg or Se/SigmaHg were obviously higher than 1 when hepatic SigmaHg levels were less than the range, while both ratios were close to 1 when SigmaHg levels were higher than the threshold, suggesting a mechanism by detoxification of OrgHg into less toxic mercuric selenide (HgSe) forms in the latter.     

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10^?6 f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.     

Source-specific sewage pollution detection in urban river waters using pharmaceuticals and personal care products as molecular indicators

Environmental Science and Pollution Research - Source-specific elucidation of domestic sewage pollution caused by various effluent sources in an urban river water, as conducted for this study,...