Honeybee foragers adjust crop contents before leaving the hive

Upon leaving the hive, foragers carry a small amount of honey, which they subsequently consume to generate energy for flight. We investigated the relationship between waggle-phase duration and crop volume in foragers (both dancers and dance followers) leaving the hive. Our findings indicate that these variables were positively correlated in the two types of bee, suggesting that they were able to adjust the amount of food that they carry depending on the distance to a food source. We also found that dance followers left the hive with a larger amount of honey than dancers. We suggest two possible explanations: (1) dance followers have less information about the location of the food source than dancers, who have a better knowledge of the surrounding area; or (2) honeybees lack a precise calibration method for estimating energy needs from waggle-run duration. The effect of foraging experience was confirmed: bees decreased their honey load at departure with repeated trips to a sugar-syrup feeder. Honeybees showed a different pattern of change when the feeder provided soybean flour as a pollen substitute, possibly because honeybees use honey not only as an energy source but also as “glue” to form “balls” of pollen on their hind legs. Based on our observations that followers of sugar-syrup foragers carry a different amount of honey in their crop than followers of soybean-followers, we suggest that waggle dancers also convey information concerning food type.     

Spring water quality and usability in the Mount Cameroon area revealed by hydrogeochemistry

Groundwater is the only reliable water resource for drinking, domestic, and agricultural purposes for the people living in the Mount Cameroon area. Hydrogeochemical and R-mode factor analysis were used to identify hydrogeochemical processes controlling spring water quality and assess its usability for the above uses. Main water types in the study area are Ca-Mg-HCO(3) and Na-HCO(3). This study reveals that three processes are controlling the spring water quality. CO(2)-driven silicate weathering and reverse cation exchange are the most important processes affecting the hydrochemistry of the spring waters. While tropical oceanic monsoon chloride-rich/sulfate-rich rainwater seems to affect spring water chemistry at low-altitude areas, strong correlations exist between major ions, dissolved silica and the altitude of springs. In general, the spring waters are suitable for drinking and domestic uses. Total hardness (TH) values indicate a general softness of the waters, which is linked to the development of cardiovascular diseases. Based on Na?%, residual sodium carbonate, sodium adsorption ratio, and the USSL classification, the spring waters are considered suitable for irrigation. Though there is wide spread use of chemical fertilizers and intense urban settlements at the lower flanks of the volcano, anthropogenic activities for now seem to have little impact on the spring water quality.     

Reduction of CO2 emission by optimally tracking a pre-defined target

The recent global financial crisis has highlighted the need for balanced and efficient investments in the reduction of the greenhouse effect caused by emissions of CO₂ on a global scale. In a previous paper, the authors proposed a mathematical model describing the dynamic relation of CO₂ emission with investment in reforestation and clean technology. An efficient allocation of resources to reduce the greenhouse effect has also been proposed. Here, this model is used to provide estimates of the investments needed in land reforestation and in the adoption of clean technologies for an optimum emission and abatement of CO₂, for the period of 1996–2014. The required investments are computed to minimize deviations with respect to the emission targets proposed in the Kyoto Protocol for European Countries. The emission target can be achieved by 2014 with investments in reforestation peaking in 2004, and a reduction of the expected GDP of 42%, relative to 2006. Investments in clean technology should increase between 2008 and 2010 with maximum transfer figures around 70 million American dollars. Total (cumulative) costs are, however, relatively high depending on the price of carbon abatement and the rate at which the expected CO₂ concentration in the atmosphere should be reduced. Results highlight the advantages for policy makers to be able to manage investments in climate policy more efficiently, controlling optimum transfers based on a portfolio of actions that tracks a pre-defined CO₂ concentration target.     

Factors affecting the interval between clutches in the hermit crab <Emphasis Type="Italic">Pagurus nigrivittatus</Emphasis>

Interval between reproductive events is an important factor for iteroparous animals because it determines the number of clutches throughout life. This study examined whether female size, clutch size, shell size and prenuptial molting affected the clutch interval in the hermit crab Pagurus nigrivittatus. Precopulatory guarding pairs of P. nigrivittatus were sampled in the field and kept in the laboratory until the female extruded eggs. The clutch interval of each female was assessed as one of two types of relatively “short” and “long” intervals by checking whether the guarded female had eggs and/or egg cases from the preceding brood or not when the guarding pair was collected. The clutch interval was longer in females with prenuptial molting than those without molting and these females usually grew larger at the prenuptial molt. This suggests that female P. nigrivittatus with a long interval might allocate energy into growth at the expense of the number of clutches during the current reproductive season. The allocation to growth is theoretically predicted to decrease with female size. Gastropod shell size is also known to affect the reproductive activity in hermit crabs. However, female size did not significantly affect the clutch interval in P. nigrivittatus, and the effect of gastropod shell size on clutch interval was not consistent with previous empirical studies. These results may be caused by differences in the gastropod species of shell occupied by the females of P. nigrivittatus.     

A method for diagnosis of plant environmental stresses by gene expression profiling using a cDNA macroarray

Plants in the field are subjected to numerous environmental stresses. Lengthy continuation of such environmental stresses or a rapid increase in their intensity is harmful to vegetation. Assessments of the phytotoxicity of various stresses have been performed in many countries, although they have largely been based on estimates of leaf injury. We developed a novel method of detecting plant stresses that is more sensitive and specific than those previously available. This method is based on the detection of mRNA expression changes in 205 ozone-responsive Arabidopsis expressed sequence tags (ESTs) by cDNA macroarray analysis. By using this method, we illustrated shifts in gene expression in response to stressors such as drought, salinity, UV-B, low temperature, high temperature, and acid rain, as distinct from those in response to ozone. We also made a mini-scale macroarray with 12 ESTs for diagnosis of the above environmental stresses in plants. These results illustrate the potential of our cDNA macroarray for diagnosis of various stresses in plants.     

Detection and average content levels of carcinogenic and mutagenic compounds from the particulates on diesel and gasoline engine mufflers

Carcinogenic and mutagenic compounds, which were extracted from the particulates that adhered to inner surfaces of diesel and gasoline engine mufflers, were quantified by the series method of Soxhlet extraction, liquid-liquid partition, thin-layer chromatography, and spectrofluorometry. Mutagenic activity of their neutral and acidic fractions was tested in the improved Ames assay by the preincubation method with Salmonella typhimurium TA98 in the presence and absence of metabolic activation system (S-9 mix). The average content levels (μg/g tar) of polycyclic aromatic hydrocarbons from gasoline engine cars were greater than those from diesel engine vehicles. However, the levels of nitro derivatives of PAHs and polycyclic quinones from the diesel engines were greater than from the gasoline engines. Mutagenic activity of the diesel acidic fraction was the highest among the diesel and gasoline fractions, and was significantly higher in the absence of the S-9 mix. Furthermore, the relative value (R_{c = 0}) of infrared absorption of carbonyl stretching vibration to that of methylene asymmetric stretching vibration of the diesel acidic fraction was the highest among the diesel and gasoline fractions. These results strongly suggest that highly direct-acting mutagens in the acidic fraction are at higher levels in diesel emission particulates than those from gasoline, and that these mutagens are carboxylic acid, aldehyde, and alcohol derivatives of PAHs and NPAHs.     

The flame retardant tetrabromobisphenol-A and its metabolite found in river and marine sediments in Japan

Tetrabromobisphenol-A (TBBP), used as a flame retardant, was detected in river sediments collected in Osaka, Japan, at a concentration range from 22 to 140 μg/kg (ppb), as determined on a dry weight basis. TBBP was also found in marine sediments collected at Osaka Bay, though the TBBP levels of these samples were much lower than those from river sediments. Dimethyl ether derivative of TBBP (TBBP-DM), thought to be a decomposition product from microbial methylation, was found in the river sediments but in none of the marine sediments. TBBP-DM residues were about one-hundredth of the TBBP levels.     

Micro dimple milling on cylinder surfaces

The paper presents a micro dimple machining on a cylinder surface with a two-flutes ball end mill. When the cutter axis is inclined and the depth of cut is less than the tool radius, non-cutting time, during which neither of the two cutting edges contacts the workpiece, appears in a rotation of the cutter. The rotation of the workpiece and the feed of the tool are controlled so that the cutting areas do not overlap each other. In order to incline the tool with respect to the tangential direction on the cylinder surface, the tool is located at a position oriented at 45° from the top of the cylinder. An analytical model is presented to control the shapes of the dimples with the cutting parameters. The presented machining is verified in cutting tests with measuring the shape and the profile of the dimples. Pre-machining operations are conducted to have a high cylindricity of the workpiece in longitudinal turning and polishing. The cutter runout of the tool is also eliminated by adjusting the orientation and the position of the tool in the collet chuck with measuring the cutting force. The micro dimples are machined accurately as they are simulated.     

Evaluation of groundwater quality and its suitability for drinking,domestic, and agricultural uses in the Banana Plain (Mbanga,Njombe, Penja) of the Cameroon Volcanic Line

Groundwater quality of the Banana Plain (Mbanga, Njombe, Penja—Cameroon) was assessed for its suitability for drinking, domestic, and agricultural uses. A total of 67 groundwater samples were collected from open wells, springs, and boreholes. Samples were analyzed for physicochemical properties, major ions, and dissolved silica. In 95% of groundwater samples, calcium is the dominant cation, while sodium dominates in 5% of the samples. Eighty percent of the samples have HCO₃ as major anion, and in 20%, NO₃ is the major anion. Main water types in the study area are CaHCO₃, CaMgHCO₃, CaNaHCO₃, and CaNaNO₃ClHCO₃. CO₂-driven weathering of silicate minerals followed by cation exchange seemingly controls largely the concentrations of major ions in the groundwaters of this area. Nitrate, sulfate, and chloride concentrations strongly express the impact of anthropogenic activities (agriculture and domestic activities) on groundwater quality. Sixty-four percent of the waters have nitrate concentrations higher than the drinking water limit. Also limiting groundwater use for potable and domestic purposes are contents of Ca²⁺, Mg²⁺ and HCO₃ ⁻ and total hardness (TH) that exceed World Health Organization (WHO) standards. Irrigational suitability of groundwaters in the study area was also evaluated, and results show that all the samples are fit for irrigation. Groundwater quality in the Banana Plain is impeded by natural geology and anthropogenic activities, and proper groundwater management strategies are necessary to protect sustainably this valuable resource.     

Bacterial community structure analysis of sediment in the Sagami River, Japan using a rapid approach based on two-dimensional DNA gel electrophoresis mapping with selective primer pairs

A rapid approach based on two-dimensional DNA gel electrophroesis (2-DGE) mapping with selective primer pairs was employed to analyze bacterial community structure in sediments from upstream, midstream and downstream of Sagami River in Japan. The 2-DGE maps indicated that Alpha- and Delta-proteobacteria were major bacterial populations in the upstream and midstream sediments. Further bacterial community structure analysis showed that richness proportion of Alpha- and Delta-proteobacterial groups reflected a trend toward decreasing from the upstream to downstream sediments. The biomass proportion of bacterial populations in the midstream sediment showed a significantly difference from that in the other sediments, suggesting that there may be an environmental pressure on the midstream bacterial community. Lorenz curves, together with Gini coefficients were successfully applied to the 2-DGE mapping data for resolving evenness of bacterial populations, and showed that the plotted curve from high-resolution 2-DGE mapping became less linear and more an exponential function than that of the 1-DGE methods such as chain length analysis and denaturing gradient gel electrophoresis, suggesting that the 2-DGE mapping may achieve a more detailed evaluation of bacterial community. In conclusion, the 2-DGE mapping combined with the selective primer pairs enables bacterial community structure analysis in river sediment and thus it can also monitor sediment pollution based on the change of bacterial community structure.