Neighborhood influences on the diffusion of residential photovoltaic systems in Kyoto City,Japan

Environmental Economics and Policy Studies - This study investigates the factors influencing the diffusion of residential photovoltaic systems. Factors examined are related to social attributes,...     

Microhabitat association in white-streaked grouper Epinephelus ongus: importance of Acropora spp.

Microhabitat associations are considered to be important for juvenile survivorship and growth of coral reef fishes. The aim of the study was to quantify microhabitat associations between juvenile and adult white-streaked grouper Epinephelus ongus, which supports important fisheries in coral reef areas. Underwater observations revealed that most juveniles were found in bottlebrush Acropora spp., staghorn Acropora spp. and coral rubble and there was a significant positive use of bottlebrush Acropora spp. and a significant negative use of coral rubble. For adults, most individuals were found in bottlebrush Acropora spp. and staghorn Acropora spp., and there was a significant positive use of staghorn Acropora spp. and significant negative use of coral rubble. A habitat choice experiment by using pre-settlement individuals revealed that both bottlebrush Acropora spp. and staghorn Acropora spp. were used as settlement sites, whereas coral rubble was rarely used as a settlement site. Results of the study suggest that juvenile and adult E. ongus showed significantly positive microhabitat associations with bottlebrush Acropora spp. and staghorn Acropora spp., respectively, in the field. Bottlebrush Acropora spp. has smaller inter-branch spaces than staghorn Acropora spp., which could drive patterns of microhabitat associations. In addition, post-settlement processes such as predation may influence the spatial distribution of juveniles. Because Acropora corals are very susceptible to coral bleaching, we predict that rising temperatures from climate change will negatively impact populations of E. ongus.     

Study on the effect of porous fence on air quality and traffic noise level around a double-decked road structure

Fence for traffic noise control sometimes causes adverse effect on air pollution. Thus in this study, performance of porous fence as a tool for control of both air pollution and noise pollution was evaluated. A two-dimensional numerical model for flow and pollutant concentration and an analytical model for traffic noise were utilized in the analysis of a double-decked road structure with fences only at ground (Case 1) and at both ground and upper deck (Case 2). Porous fences were assumed only at the ground level since the solid fences at the upper deck usually leads to desirable result on air pollution. Effects of the variable porosity on air quality and noise level near road were evaluated. Obtained results showed: (1) flow pattern in leeward of fence was drastically changed at 40–50% porosity in Case 1 and 50% in Case 2. The porosity larger than 40% excluded presence of a circulation behind the fence. (2) Effect of porous fence on air pollution was different in Cases 1 and 2. In Case 1, the porous fence generally resulted in the reduction of air pollution at the ground level; on the other hand, in Case 2, it rather led to increase of the concentration. (3) Traffic noise level was also largely changed by the porosity of the fence; an example of simultaneous evaluation of the effects of porous fence on both air and noise pollution in Case 1 showed that the fence of 60% porosity leads to reduction of air pollution by 20% compared with solid fence case, and reduction of noise pollution by 4–6% in dB compared with no fence case, at l m high and 10 m from the road.     

Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW

This paper provides the results of studies on the characteristics of novel material derived from pyrolysis/melting treatment of municipal solid waste in Japan. Slag products from pyrolysis/melting plants were sampled for the purpose of detailed phase analysis and characterization of heavy metal-containing phases using optical microscopy, electron probe microanalysis (EPMA), XRF and XRD. The study revealed that the slag material contains glass (over 95%), oxide and silicate minerals (spinel, melilite, pseudowollastonite), as well as individual metallic inclusions as the major constituents. A distinct chemical diversity was discovered in the interstitial glass in terms of silica content defined as low and high silica glass end members. Elevated concentrations of Zn, Cr, Cu, Pb and Ba were recorded in the bulk composition. Cu, Pb and Ba behave as incompatible elements since they have been markedly characterized as part of polymetallic alloys and insignificantly sulfides in the form of spherical metallic inclusions associated with tracer amounts of other elements such as Sb, Sn, Ni, Zn, Al, P and Si. In contrast, an appreciable amount of Zn is retained by zinc-rich end members of spinel and partially by melilite and silica glass. Chromium exhibits similar behavior, and is considerably held by Cr-rich spinel. The intense incorporation of Zn and Cr into spinel indicates the very effective enrichment of these two elements into phases more environmentally resistant than glass. There was no evidence, however, that Cu and Pb enter into the structure of the crystalline silicates or oxides that may lead to their easier leachability upon exposure to the environment.     

Detection of Hepatitis E Virus in Sewage After an Outbreak on a French Island

A hepatitis E outbreak, which occurred on a small isolated island, provided an opportunity to evaluate the association between the number of hepatitis E cases in the community and the concentration of virus detected in sewage. Samples were collected from the different sewage treatment plants from the island and analyzed for the presence of hepatitis E (HEV) virus using real-time RT-PCR. We demonstrated that if 1–4 % of inhabitants connected to a WWTP were infected with HEV, raw sewage contained HEV at detectable levels. The finding that such a small number of infected people can contaminate municipal sewage works raises the potential of the further distribution of the virus. Indeed, investigating the routes of transmission of HEV, including the potential for sewage effluent to contain infectious HEV, may help us to better understand the epidemiology of this pathogen, which is considered to be an emerging concern in Europe.     

A numerical experiment of roadside diffusion under traffic-produced flow and turbulence

Roadside air pollution due to heavy traffic is one of the unsettled issues in the atmospheric environment in urban areas. As a practical application of a Computational Fluid Dynamics (CFD) model, a coupled mesoscale-CFD model was applied to the Ikegamicho area of Kawasaki City, Japan. For this study, the effects of traffic-produced flow and turbulence (TPFT) on the dispersion of the pollutants near the heavy traffic road were mainly investigated in an actual urban area. First, a series of preliminary CFD calculations was conducted for a road tunnel field experiment to obtain a fitting parameter for the traffic-produced flow. The calculation was then performed for 24 h in December 2005 around Ikegamicho, and the results were compared with the data at a roadside monitoring post in the area, located 10 m from the boundary of the ground road. In general, the effect of traffic-produced flow and turbulence was limited at the downstream side of the roads. The maximum concentration of NO_x was reduced and smoothed out along the traffic flow by the traffic-produced flow and turbulence on the road. The effects of traffic-produced turbulence on the dispersion of pollutants were greater than those of traffic-produced flow; however, the effects of traffic-produced flow were not negligible. The concentration of pollutants was not particularly dependent on the turbulent Schmidt number because most of the emission sources were introduced as volume sources in the present calculations, and the effect caused by differences in the material diffusion coefficient was not particularly significant at the outside of the road.     

Influence of aeration modes on leachate characteristic of landfills that adopt the aerobic–anaerobic landfill method

As far as the optimal design, operation, and field application of the Aerobic–Anaerobic Landfill Method (AALM) are concerned, it is very important to understand how aeration modes (different combinations of aeration depth and air injection rate) affect the biodegradation of organic carbon and the transformation of nitrogen in landfill solid waste. Pilot-scale lysimeter experiments were carried out under different aeration modes to obtain detailed information regarding the influence of aeration modes on leachate characteristics. Results from these lysimeter experiments revealed that aeration at the bottom layer was the most effective for decomposition of organic carbon when compared with aeration at the surface or middle layers. Moreover, the air injection rate led to different nitrogen transformation patterns, unlike the lesser influence it has on organic carbon decomposition. Effective simultaneous nitrification and denitrification were observed for the aeration mode with a higher air injection rate (=1.0 L/min). On the other hand, the phenomenon of sequenced nitrification and denitrification could be observed when a low air injection rate (=0.5 L/min.) was employed. Finally, it is concluded that, for AALM, air injection with a higher air injection rate at the deepest layer near the leachate collection pipe tends to accelerate the stabilization of landfill waste as defined in terms of the enhancement of denitrification as well as organic carbon decomposition.     

Calorimetric behaviors of hydroxylamine and its salts caused by Fe(III)

The objective of this study is to obtain information on the calorimetric behaviors of aqueous solutions of hydroxylamine (HA), hydroxylamine chloride (HACl), and hydroxylamine nitrate(HAN) caused by different Fe(III) states (free Fe(III) from Fe(NH₄)(SO₄)₂, Fe(CN)₆³⁻, and Fe(EDTA)⁻). The calorimetric data were obtained with a small-scaled reaction calorimeter, Super-CRC.

In the mixing with Fe(III), HA showed the highest reactivity among three substrates. Free Fe(III) and Fe(EDTA)⁻ showed catalytic effects in the reactions. In the overall heat of reactions, Fe(EDTA)⁻ exceeded free Fe(III), which precipitated as Fe(OH)₃ and decreased the chances of interactions with HA. It was suggested that the generation of NH₃ had taken place in the process of reducing HA along with Fe(II) oxidation. Fe(CN)₆³⁻ was less reactive than free Fe(III) and Fe(EDTA)⁻.

The ability of masking Fe(III) was estimated for CyDTA. The HA including CyDTA had no exothermic peak; however, there was an endothermic peak of the heat flow at Fe(III) injection. CyDTA was found to have the ability to inhibit a violent exothermic reaction of HA.     

Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0–70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.

Implications Although waste combustion is one of major anthropogenic sources of atmospheric mercury emission, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated speciated mercury emissions from the combustions of municipal solid wastes, sewage treatment sludge with/without waste plastics, industrial waste mixtures, waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form in all combustion cases and its concentration in the gas had large fluctuation. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.     

Pyrosequencing Analysis of Norovirus Genogroup II Distribution in Sewage and Oysters: First Detection of GII.17 Kawasaki 2014 in Oysters

Norovirus GII.3, GII.4, and GII.17 were detected using pyrosequencing in sewage and oysters in January and February 2015, in Japan. The strains in sewage and oyster samples were genetically identical or similar, predominant strains belonging to GII.17 Kawasaki 2014 lineage. This is the first report of GII.17 Kawasaki 2014 in oysters.