Preparation of Chitin/Cellulose Films Compatibilized with Polymeric Ionic Liquids

This paper reports the preparation of chitin/cellulose films compatibilized with polymeric ionic liquids. In-situ (co)polymerization of polymerizable ionic liquids, 1-(3-methacryloyloxypropyl)-3-vinylimidazolium bromide (1) and 1-methyl-3-vinylbenzylimidazolium chloride (3), was carried out in the presence of a radical initiator, AIBN, in the chitin/cellulose solution with ionic liquid solvents (1-butyl-3-methylimidazolium acetate and chloride, BMIMOAc and BMIMCl, respectively), followed by the appropriate procedure to give the desired films. The presence of the polymeric ionic liquid in the film was confirmed by the IR measurement. The powder X-ray diffraction analysis suggested that crystalline structures of the polysaccharides were largely disrupted in the film, as same as that of a chitin/cellulose film prepared by the AMIMOAc/BMIMCl system. These results were different from the XRD result of a chitin/cellulose film prepared by the 1-allyl-3-methylimidazolium bromide/BMIMCl system reported in our previous study, in which some crystalline structures were still remained in the film. Furthermore, the mechanical properties of the present films were evaluated by tensile testing, which were affected by the molar ratios of the polymeric ionic liquids to the polysaccharides and the compositional ratios of the two units 1 and 3.     

Concentration levels and congener profiles of polychlorinated biphenyls, pentachlorobenzene, and hexachlorobenzene in commercial pigments

The concentration levels and congener profiles of polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz) were assessed in commercially available organic pigments. Among the azo-type pigments tested, PCB-11, which is synthesized from 3,3′-dichlorobendizine, and PCB-52, which is synthesized from 2,2′,5,5′-tetrachlorobendizine, were the major congeners detected. It is speculated that these were byproducts of chlorobendizine, which has a very similar structure. The total PCB concentrations in this type of pigment ranged from 0.0070 to 740 mg/kg. Among the phthalocyanine-type pigments, highly chlorinated PCBs, mainly composed of PCB-209, PeCBz, and HxCBz were detected. Their concentration levels ranged from 0.011 to 2.5 mg/kg, 0.0035 to 8.4 mg/kg, and 0.027 to 75 mg/kg, respectively. It is suggested that PeCBz and HxCBz were formed as byproducts and converted into PCBs at the time of synthesizing the phthalocyanine green. For the polycyclic-type pigments that were assessed, a distinctive PCB congener profile was detected that suggested an impact of their raw materials and the organic solvent used in the pigment synthesis. PCB pollution from PCB-11, PCB-52, and PCB-209 pigments is of particular concern; therefore, the monthly variations in atmospheric concentrations of these pollutants were measured in an urban area (Sapporo city) and an industrial area (Muroran city). The study detected a certain level of PCB-11, which is not included in PCB technical mixtures, and revealed continuing PCB pollution originating from pigments in the ambient air.     

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183)

2,2′,3,5′,6-Pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.     

Robust ridge regression for estimating the effects of correlated gene expressions on phenotypic traits

Statistical packages such as edgeR and DESeq are intended to detect genes that are relevant to phenotypic traits and diseases. A few studies have also modeled the relationships between gene expressions and traits. In the presence of multicollinearity and outliers, which are unavoidable in genetic data, the robust ridge regression estimator can be applied with the trait value as the response variable and the gene expressions as explanatory variables. In some simulation scenarios, the robust ridge estimator is resistant to outliers and less susceptible to multicollinearity than the ordinary least-squares (OLS) estimator. This study investigated the reliability of the robust ridge estimator, in a scenario where the explanatory variables have tail-dependence and negative binomial distributions, by comparing its performance to that of OLS using vine copula to model the tail-dependence among gene expressions. The robust ridge estimator and OLS were both applied to an ecological dataset. First, statistical analysis was used to compare RNA sequencing data between two treatments; then, 15 differentially expressed genes were selected. Next, the regression parameter estimates of robust ridge and OLS for the effects of the 15 contigs (explanatory variables) on trait values (response variables) were compared. Robust ridge regression was found to detect fewer positive and negative slopes than OLS regression. These results indicate that robust ridge regression can be successfully applied for RNA sequencing analysis to estimate the effect of trait-associated genes using real data, and holds great promise as a tool for modeling the association between RNA expression and phenotypic traits.     

Formation characteristics of PCDD and PCDF during pyrolysis processes

In recent years, pyrolysis processes have become technologies developed to industrial scale and discussed as alternatives to the existing waste combustion technology. However, little information is published regarding PCDD/F formation characteristics during pyrolysis processes. Two common shredder fractions – industrial light shredder (ILS) and refrigerators (REF) – both with high chlorine and copper content were pyrolysed for this pyrolysis study using a pilot plant with a capacity of 100 kg/h. At oxygen concentrations below 2% and temperatures between 430°C and 470°C, considerable amounts of PCDD/F were formed during the pyrolysis. More than 90% of total TEQ was found in the oil fraction (gas phase). The PCDD/PCDF ratio and the homologue pattern differed significantly from those formed during waste incineration. Considering mono- to octachlorinated congeners, up to 400 times more PCDF were formed compared to PCDD. For the investigated pyrolysis conditions, the formation of low chlorinated congeners was highly favoured. The distribution of TEQ within the individual congeners were very similar in all investigated runs. More than 80% of total TEQ stem from 2,3,7,8-substituted T₄CDF and P₅CDF. The isomer pattern, however, did not show significant differences compared to the common waste incineration pattern suggesting that the basic formation routes are similar.     

Simultaneous determination of 2-phenylbenzotriazole-type mutagens, PBTA-1 through -8, in river water by liquid chromatography-tandem mass spectrometry

We describe a method for the simultaneous determination of eight kinds of phenylbenzotriazole-type mutagens (PBTA-1, -2, -3, -4, -5, -6, -7 and -8) in river water based on liquid chromatography-tandem mass spectrometry (LC/MS/MS). The application of dopant-assisted atmospheric pressure photoionization (APPI) for the detection of the PBTAs was studied. The APPI technique provided higher PBTA signal intensities than those obtained with an electrospray ionization (ESI) source, and the APPI method was used for the determination of the PBTAs. A solid-phase extraction procedure was used for the extractions of PBTA-1 through -8 from river water. The procedure was rapid and the relative standard deviations were below 15%. The detection limits of PBTA-1 through -8 in river water using the proposed method were found to range from 0.04 to 0.5 ng L(-1) and PBTAs were successfully detected in river water at sub-ng L(-1) levels.     

A simulation model for Japanese sardine (Sardinops melanostictus) migrations in the western North Pacific

A two-dimensional individual-based model coupled with fish bioenergetics was developed to simulate migration and growth of Japanese sardine (Sardinops melanostictus) in the western North Pacific. In the model, fish movement is controlled by feeding and spawning migrations with passive transport by simulated ocean current. Feeding migration was assumed to be governed by search for local optimal habitats, which is estimated by the spatial distribution of net growth rate of a sardine bioenergetics model. The forage density is one of the most important factors which determines the geographical distributions of Japanese sardine during their feeding migrations. Spawning migration was modeled by an artificial neural network (ANN) with an input layer composed of five neurons that receive environmental information (surface temperature, temperature change experienced, current speed, day length and distance from land). Once the weight of the ANN was determined, the fish movement was solved by combining with the feeding migration model. To obtain the weights of the ANN, three experiments were conducted in which (1) the ANN was trained with back propagation (BP) method with optimum training data, (2) genetic algorithm (GA) was used to adjust the weights and (3) the weights of the ANN were decided by the GA with BP, respectively. BP is a supervised learning technique for training ANNs. GA is a search technique used in computing to find approximate solutions, such as optimization of parameters. Condition factor of sardine in the model is used as a factor of optimization in the GA works. The methods using only BP or GA did not work to search the appropriate weights in the ANN for spawning migration. In the third method, which is a combined approach of GA with BP, the model reproduced the most realistic spawning migration of Japanese sardine. The changes in temperature and day length are important factors for the orientation cues of Japanese sardine according to the sensitivity analysis of the weights of the ANN.     

The effect of predation risk on post-copulatory sexual selection in the Japanese pygmy squid

Behavioral Ecology and Sociobiology - The pace-of-life syndrome (POLS) hypothesis predicts that behavior and physiology covary with life history. Evidence for such covariation is contradictory,...