Benthic macroinvertebrates as reference indicators for monitoring of anthropogenic isotope 137Cs contamination in the marine environment

Environmental Science and Pollution Research - Due to the limited studies dealing with isotopes levels in benthic macroinvertebrates other than Mytilus sp. in period 2011–2018,...     

A Geographic Information System (GIS)-based approach to adaptation to regional climate change: a case study of Okutama-machi,Tokyo, Japan

Recently, local governments have an increasing need to take extensive and effective local measures to adapt to regional climate change, but have difficulty knowing how and when to adapt to such change. This study aims: 1) to characterize an efficient and cost-effective database management tool (DMT) for developing a Geographic Information System (GIS) based approach to using observed and projected data, for decision-making by non-expert government authorities, and 2) to document how DMT can be used to provide specialized yet understandable climate change information to assist local decision-makers in clarifying regional priorities within a wide array of adaptation options. The DMT combines climate change mapping, statistical GIS, and a vulnerability assessment. Okutama-machi, a 225.63 km² sparsely populated mountainous region (2012 population 5,856) northwest of Tokyo, Japan, was chosen for this pilot study. In this paper, the most recent regional climate projections (5 km resolution) are transcribed into an understandable form for use by non-expert citizens who use the GIS-based DMT. Results illustrate qualitative agreement in projection of summer daily mean temperatures; the mean temperature increase at Okutama-machi is the greatest of any area in Tokyo. In comparing near future and future conditions, August monthly mean temperature will increase more than 0.7–0.9 °C and 2.8–2.9 °C, and monthly precipitation by 50 % and 25–41 %, respectively. However, the root mean square (RMS) errors and bias of percentage change for monthly precipitation in summertime are 26.8 % and 4.3 %, respectively. These data provide an early warning and have implications for local climate policy response.     

Bankfull Regional Curves for the Alleghany Plateau/Valley and Ridge,Piedmont, and Coastal Plain Regions of Maryland

Regional curves are empirical relationships that can help identify the bankfull stage in ungaged watersheds and aid in designing the riffle dimension in stream restoration projects. Bankfull regional curves were developed from gage stations with drainage areas less than 102 mi² (264.2 km²) for the Alleghany Plateau/Valley and Ridge (AP/VR), Piedmont, and Coastal Plain regions of Maryland. The AP/VR regions were combined into one region for this project. These curves relate bankfull discharge, cross‐sectional area, width, and mean depth to drainage area within the same hydro‐physiographic region (region with similar rainfall/runoff relationship). The bankfull discharge curve for the Coastal Plain region was further subdivided into the Western Coastal Plain (WCP) and Eastern Coastal Plain (ECP) region due to differences in topography and runoff. Results show that the Maryland Piedmont yields the highest bankfull discharge rate per unit drainage area, followed by the AP/VR, WCP, and ECP. Likewise, the Coastal Plain and AP/VR streams have less bankfull cross‐sectional area per unit drainage area than the Piedmont. The average bankfull discharge return interval across the three hydro‐physiographic regions was 1.4 years. The Maryland regional curves were compared to other curves in the eastern United States. The average bankfull discharge return interval for the other studies ranged from 1.1 to 1.8 years.     

Eco-friendly synthesis of nanostructured mesoporous materials from natural source rice husk silica for environmental applications

Environmental Science and Pollution Research - Nanostructured mesoporous materials of MCM-41 type were synthesized using a natural, non-toxic, and cheap source of silica from rice husk. Then, this...     

CO<Subscript>2</Subscript> emission and economic growth of Iran

This research investigates the relationship between CO₂ emission and economic growth of Iran over 14 years from 1994 to 2007 using a national panel data set. The statistical and emission intensity methodologies are used for analyzing the data series. The study finds evidence supporting parameters which conclude the stability of significant correlation between CO₂ emission and economic development over time during the years under investigation in Iran. This relationship is investigated and discussed for the energy sectors of the country as well. The results confirm that in all sectors except of agricultural, there is a positive strong correlation between CO₂ emission and economic growth throughout the study period. In most sectors, CO₂ emission intensity (the emission per unit of GDP) doesn’t show increasing trends while the absolute emission is rapidly increasing by the economic growth.     

Seasonal and spatial variation of atmospheric 210Pb and 7Be deposition: features of the Japan Sea side of Japan

Monthly depositional fluxes of (210)Pb and (7)Be at Tatsunokuchi, Japan which faces the Japan Sea were studied over a 12-year period from 1991 to 2002. The data were compared with the spatial variability of these fluxes at Taejon in Korea and at 11 other sites in Japan from Ishigaki of the southern islands of Okinawa to Wakkanai of the northern end of Hokkaido over a 2-year period from 2000 to 2001. The monthly depositions of both (210)Pb and (7)Be at Tatsunokuchi revealed very similar seasonal variations with a single peak; both depositions were high in winter and low in summer. This phenomenon was found to be not transient but stationary. The deposition of these nuclides was much greater on the Japan Sea side of Japan than on the Pacific Ocean side. The cause for high deposition of (210)Pb and (7)Be in winter might be explained by a combination of a series of the following processes: blowing out of air masses with a high (210)Pb concentration near the surface layer over the continent by strong winter monsoons, additional flow of cold air masses with high (7)Be concentration at high latitude, well-mixing with generation of ascending current and convection clouds over the Japan Sea, and heavy snowfalls accompanying them.     

Gasification and smelting system using oxygen blowing for plastic waste including polyvinyl chloride

A new type of waste gasification and smelting system using oxygen blowing based on high-temperature metallurgy, was developed by Sumitomo Metals, Japan. This system can steadily gasify and melt not only municipal waste, but also plastic waste and polyvinyl chloride (PVC) waste by using a top-blow oxygen lance together with sideways-blow oxygen lances. As a result of gasification in the high-temperature reducing atmosphere and rapid gas cooling, dioxin-free, high-calorie purified gas was produced. Ash components in the wastes were smelted in a high-temperature reducing atmosphere, and high-quality slag free of heavy metals was produced. Most of the chlorine in the wastes was converted into hydrogen chloride in the off gas. The hydrogen chloride can be recovered as hydrochloric acid or chlorine, which are recyclable to PVC manufacturing.     

Subcutaneous Arteriolar Vasomotion Changes During and After ELF-EMF Exposure in Mice in Vivo

Summary Biological effects of extremely low-frequency electromagnetic fields (ELF-EMF) on microcirculation were investigated in vivo by monitoring arteriole diameters in conscious mice. Measurements of blood vessel diameter were monitored 33 min non-stop before during and after exposure with ELF-EMF and every 389 ms blood vessel diameter were calculated. Using a dorsal skinfold chamber (DSC), and following caudal vein injection of FITC-dextran 250 kDa, the microvasculature (initial arteriole diameter of 45–80 μm), was examined by intravital microscopy and video images were recorded for a total time of 33 min. Arteriole diameter was continuously measured by on-line analysis using a High-speed Digital Machine Vision System CV-2100, using an edge-gap detection algorithm. Since vessel diameters exhibit rhythmic variation expressed by vasomotion, for estimation of microcirculatory activity we used both raw data for frequency analysis of vasomotion (measured frequencies of vasomotion were in the range 0.008÷0.1 Hz) and evaluate mean blood vessel diameter for each 1 min period of time, and make a comparison between Pre, Exposure/Sham exposure and Post exposure periods, with the aim to evaluate possible changes in mean blood vessel diameter as a result of ELF-EMF action. During EMF exposure and post-exposure periods, arteriole diameters increased significantly compared with the pre-exposure period, and the changes were larger during post-exposure. In contrast to sham exposure, vasodilatation of the microvasculature was significantly greater during exposure and post-exposure to 16 Hz EMF. These findings suggest that ELF-EMF may have potential therapeutic use benefit for treating vascular disorders.