Kinetics of heterogeneous ozone reactions

Earlier results on ozone destruction on solid surfaces gave apparent first order kinetics. Estimating the reaction kinetics from our data on ozone destruction on various powders (silica-gel, alumina, wood ash, coal ash, Saharan sand, calcite), we found that only calcite and wood ash exhibited such a behaviour. Removal of ozone by other powders used showed two straight lines in ln c-t plot with two different half-lives, t'(1/2) < t'(1/2). Comparing the kinetic constants for ozone removal on silica-gel and that of ozone reactions with polynuclear aromatic hydrocarbons (PAHs) adsorbed in submonolayer coverage on the same powder, the first reaction seems to be more likely in the case of pyrene and particularly fluoranthene. Enhanced ozone destruction on airborne aerosols could be an additional reason for fluoranthene stability in the real atmosphere.     

Investigation of interactions between surface water and petroleum-type pollutants

Background, Aims and Scope In oil spill investigations, one of the most important steps is a proper choice of approaches that imply an investigation of samples taken from different sedimentary environments, samples of oil contaminants taken in different periods of time and samples taken at different distances from the oil spill. In all these cases, conclusion on the influence of the environment, microorganisms or migration on the oil contaminants' composition can be drawn from the comparison of chemical compositions of the investigated contaminants. However, in case of water contaminants, it is very important to define which part of organic matter has been analyzed. Namely, previous investigations showed that there were some differences in chemical composition of the same oil contaminant depending on the intensity of its contact with ground water. The aim of this work is to define more precisely the interactions between oil contaminant and water, i.e. the influence of the intensity of interaction between the oil contaminant and water on its chemical composition. The study was based on a comparison of four fractionated extracts of an oil pollutant, after they had been analyzed in details. Methods Oil polluted surface water (wastewater canal, Pančevo, Serbia) was investigated. The study was based on a comparison of four extracts of an oil contaminant: extract 1 (decanted part), and extracts 2, 3 and 4 (extracted by shaking for 1 minute, 5 minutes and 24 hours, respectively). The fractionated extracts were saponified with a solution of KOH in methanol, and neutralized with 10% hydrochloric acid. The products were dissolved in a mixture of dichloromethane and hexane, and individually fractionated by column chromatography on alumina and silica gel (saturated hydrocarbon, aromatic, alcohol and fatty acid fractions). n-Alkanes and isoprenoid aliphatic alkanes, polycyclic alkanes of sterane and triterpane types, alcohols and fatty acids were analyzed using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). δ13CPDB values of individual n-alkanes in the aliphatic fractions were determined using gas chromatography-isotope ratio monitoring-mass spectrometry (GC-irmMS). Results and discussion. Extracts 1 and 2 are characterized by uniform distribution of n-alkanes, whereas extract 3 is characterized by an even-numbered members dominating the odd-ones, and extract 4 showed a bimodal distribution. Extract 1 is characterized by the least negative δ13CPDB values of C19-C26 n-alkanes. Sterane and triterpane analysis confirmed that all extracts originated from the same oil contaminant. n-Fatty acids, C19-C24, in all extracts are very low, being somewhat higher in extract 4. Even-numbered n-alcohols, C12–C16, were identified in the highest concentration in extract 3. It was assumed that algae were responsible for the composition of extract 3. Furthermore, a possible reason for higher concentrations of C19–C26 n-alkanes and C19–C24 fatty acids in extract 4 is the formation of inclusion compounds with colloidal micelles formed between the oil contaminant's NSO-compounds and water. Conclusion It was undoubtedly confirmed that there were specific differences in the compositions of the different extracts depending on the intensity of the interaction between the oil contaminant and the surface water. Recommendation and Outlook. When comparing the composition of oil contaminants from different water samples (regardless of the ultimate investigation goal) it is necessary to compare the extracts isolated under the same conditions, in other words, extracts that were in the same or very similar interaction with water.     

Calcium chloride and calcium bromide aqueous solutions of technical and analytical grade in Lemna bioassay

Saturated water solutions of calcium chloride, calcium bromide and their 1:1 mixture are commonly used as "high density brines" for pressure control in oil wells. To compare the effect of these chemicals of technical grade with the effect of the chemicals of analytical grade the Lemna test was used. The multiplication rate, fresh weight, dry to fresh weight ratio, area covered by plants and chlorophyll content were measured as toxicity parameters. The concentrations of tested chemicals were 0.025, 0.05. 0.075 and 0.1 mol dm(-3). Generally, the chemicals of both technical and analytical grade in concentrations of 0.025 mol dm(-3) stimulated the Lemna minor growth, while tested chemicals in concentrations of 0.05 mol dm(-3) did not affect the growth significantly. The exceptions were results obtained by measuring fresh weight. Most of tested chemicals in concentrations of 0.075 mol dm(-3) and all chemicals in concentrations of 0.1 mol dm(-3) reduced the growth. No major differences between effects of tested chemicals of technical and analytical grade on plant growth were observed, except that tested chemicals of analytical grade in concentrations of 0.1 mol dm(-3) increased dry to fresh weight ratio much stronger than chemicals of technical grade. All tested chemicals in all concentrations increased chlorophyll content. After treatment with chemicals of analytical grade much higher increase of chlorophyll a concentration in comparison to increase of chlorophyll b was noticed, while chemicals of technical grade caused more prominent increase of chlorophyll b.     

Two-compartment model of radionuclide accumulation into marine organisms. I. Accumulation from a medium of constant activity

The interpretation of kinetics of radionuclide accumulation into biological organisms can be performed by using the well-known multicompartment models. The application of a two-compartment model in the interpretation of radionuclide accumulation into marine organisms, when this does not markedly deplete the medium, is considered. It has been found that most of the loss experiments cannot be interpreted without the use of uptake data. The agreement between the uptake and loss parameters is discussed. Explicit expressions for different kinds of two-compartment models are evaluated. The interpretation of irreversible and other special cases is proposed.     

Reduced Soil Macropores and Forest Cover Reduce Warm‐Season Baseflow below Ecological Thresholds in the Upper Delaware River Basin

We examined the impacts of changes in land cover and soil conditions on the flow regime of the upper Delaware River Basin using the Water Availability Tool for Environmental Resources. We simulated flows for two periods, c. 1600 and 1940, at three sites using the same temperature and precipitation conditions: the East Branch, West Branch, and mainstem Delaware River at Callicoon, New York. The 1600 period represented pristine forest and soils. The 1940 period included reduced forest cover, increased agriculture, and degraded soils with reduced soil macropore fractions. A model‐sensitivity test examined the impact of soil macropore and land cover change separately. We assessed changes in flow regimes between the 1600 and 1940 periods using a variety of flow statistics, including established ecological limits of hydrologic alteration (ELOHA) thresholds. Reduced forest soil macropore fraction significantly reduced summer and fall baseflows. The 1940 period had significantly lower Q50 flows (50% exceedance) than the 1600 period, as well as summer and fall Q90 and Q75–Q90 flows below the ELOHA thresholds. The one‐ to seven‐day minimum flows were also lower for the 1940 period, by 17% on the mainstem. 1940 flows were 6% more likely than the 1600 period to fall below the low‐flow threshold for federally endangered dwarf wedgemussel (Alasmidonta heterodon) habitat. In contrast, the 1940 period had higher flows than the 1600 period from late fall to early winter.     

Radon survey in the high natural radiation region of Niska Banja, Serbia

A radon survey has been carried out around the town of Niska Banja (Serbia) in a region partly located over travertine formations, showing an enhanced level of natural radioactivity. Outdoor and indoor radon concentrations were measured seasonally over the whole year, using CR-39 diffusion type radon detectors. Outdoor measurements were performed at 56 points distributed over both travertine and alluvium sediment formations. Indoor radon concentrations were measured in 102 living rooms and bedrooms of 65 family houses. In about 50% of all measurement sites, radon concentration was measured over each season separately, making it possible to estimate seasonal variations, which were then used to correct values measured over different periods, and to estimate annual values. The average annual indoor radon concentration was estimated at over 1500 Bq/m3 and at about 650 Bq/m3 in parts of Niska Banja located over travertine and alluvium sediment formations, respectively, with maximum values exceeding 6000 Bq/m3. The average value of outdoor annual radon concentration was 57 Bq/m3, with a maximum value of 168 Bq/m3. The high values of indoor and outdoor radon concentrations found at Niska Banja make this region a high natural background radiation area. Statistical analysis of our data confirms that the level of indoor radon concentration depends primarily on the underlying soil and building characteristics.     

Cosmic radiation dose in aircraft--a neutron track etch detector

Cosmic radiation bombards us at high altitude by ionizing particles. The radiation environment is a complex mixture of charged particles of solar and galactic origin, as well as of secondary particles produced in interaction of the galactic cosmic particles with the nuclei of atmosphere of the Earth. The radiation field at aircraft altitude consists of different types of particles, mainly photons, electrons, positrons and neutrons, with a large energy range. The non-neutron component of cosmic radiation dose aboard ATR 42 and A 320 aircrafts (flight level of 8 and 11 km, respectively) was measured with TLD-100 (LiF:Mg,Ti) detectors and the Mini 6100 semiconductor dosimeter. The estimated occupational effective dose for the aircraft crew (A 320) working 500 h per year was 1.64 mSv. Other experiments, or dose rate measurements with the neutron dosimeter, consisting of LR-115 track detector and boron foil BN-1 or 10B converter, were performed on five intercontinental flights. Comparison of the dose rates of the non-neutron component (low LET) and the neutron one (high LET) of the radiation field at the aircraft flight level showed that the neutron component carried about 50% of the total dose. The dose rate measurements on the flights from the Middle Europe to the South and Middle America, then to Korea and Japan, showed that the flights over or near the equator region carried less dose rate; this was in accordance with the known geomagnetic latitude effect.     

Effects of soil composition on solid phase microextraction determination of triazine and organophosphorus pesticides

The influence of organic matter and clay contents on headspace solid phase microextraction (HS-SPME) determination of triazine and organophosphorus pesticides in different soils was studied. The results of the study showed that content of soil organic matter dominantly participated in sorption of triazines (simazine, atrazine and prometryn) to soil, while sorption of organophosphorus pesticides (phorate and tebupirimfos) could not be explained only by contents of dominant soil sorption components (soil organic matter and clay). Sorption of all pesticides studied to different soil types was similar at their lower concentrations while the influence of soil composition was expressed at higher concentration levels. Except for phorate, the obtained sorption trends were different from those obtained by direct SPME mode (DM-SPME) and exhaustive liquid-solid extraction (LSE) method. These results indicated that most likely co-extractants from the analyzed medium complicated evaporation and diffusion of the pesticides to the PDMS fiber during HS-SPME sampling.     

The Scientific Basis of Marine Pollution Prevention Strategies

Abstract

Prevention of marine pollution, particularly in semi-enclosed seas, embayments and areas with limited exchange of water, requires a well conceived and harmonized legal system, specified standards, a monitoring programme, and effective control and enforcement capabilities. This comprehensive approach is often called a strategy. Three generations of strategies have been devised and applied historically in Europe and North America, each a step further in integrating environmental protection, technical advancement and economic capabilities. the overpowering socio-economic problems of transition from a centrally planned to a market economy, a task facing a dozen central and eastern European coastal states, compound the problem of application of an integrated approach.

No management strategy can achieve its set goals unless based on scientific evidence. the data base has to offer information on two basic questions, one specific and one of a general nature.

The specific question is: Has the area under consideration some features, an activity, or one or more living species, which must be protected at any cost? the answer to this question will invoke the precautionary principle into strategic considerations, and leads to the general question: What is the carrying (= assimilative or environmental) capacity for each activity and for the discharge of each contaminant into the impacted area? Answers to these questions lead to the choice of the strategy for environmental management.     

EDS analysis of Portland ash cement degradation in an aggressive environment

The behaviour of Portland cement with and without 30% fly ash addition in aggressive solutions was studied. This paper considers the sulphate corrosion of the hardened cement paste. The cement paste test samples were prepared, cured in water for 21 day and then exposed to the influence of aggressive environment (10% (NH₄SO₄ solution). The measurements of several properties were carried out and the results were analyzed.

The image of the surface composition and morphology of the cement paste test samples was made by scanning electron microscopy (SEM). Concentration gradient of sulphate ions in cement paste depth was obtained by energy‐dispersive analysis (EDS).