长江流域春夏旱涝灾害与太平洋海温关联性研究

基于长江流域区域1956-2011年50年气象资料和同期太平洋海温资料,采用Z指数、EOF、REOF、SVD分析等方法,探讨长江流域春季和夏季旱涝特征及其旱涝事件与极端海温异常之间的关联性,得出以下结论。1REOF的Z指数春夏季节旱涝空间分区特征显示,春季前6个模态的累计方差贡献率能够达到61.2%,收敛速度较平缓,夏季前6个模态累积方差贡献率更低,只有52.1%。2前冬太平洋海温的变化与长江流域旱涝的态势呈显著相关关系,春季海温场与长江流域旱涝Z指数场的SVD第一模态显示,长江流域的东北区的旱涝与厄尔尼诺显著相关,当赤道东太平洋海温升高,西太平洋海温降低时,长江流域东北地区偏涝,而长江流域的西部地区偏旱,反之亦然。3夏季海温场与长江流域旱涝Z指数场的SVD第一模态,表明太平洋海温分布主要呈现南北向的分布,当赤道中东太平洋海温偏高,北太平洋海温偏低时,长江流域夏季中部地区偏涝。反之亦然。第二模态,全球海温呈现厄尔尼诺类型的分布,中东太平洋是负相关,而在西太平洋为显著负相关。     

孑遗植物四合木(Tetraenamongolica)迁地保护中的光合作用日变化特征与生理生态适应性

为了进一步廓清迁地保护条件下孑遗植物四合木（Tetraena mongolica）的光合生理生态适应性,在分析了瞬时光合效率的基础上,应用LI-6400光合作用测定系统测定了迁地保护试验区的四合木以及原生境伴生种白刺（Nitraria tangutorum）的光合作用日变化,并测定了其生长量。结果表明：四合木实生苗的生长南北冠幅大小依次为乌海四合木核心区实生苗（26.48 cm×27.26 cm）>鄂尔多斯实生苗（21.27 cm×21.75 cm）>阿拉善实生苗（19.25 cm×18.27 cm）。在原生境地乌海四合木核心区种植的实生苗与阿拉善实生苗之间的生长量存在显著差异（P≤0.01）,与鄂尔多斯实生苗之间的生长量存在显著差异（P≤0.05）。迁地保护条件下四合木生实生苗植株叶片光合速率Pn日变化均呈“双峰”曲线。不同试验区四合木光合作用日变化（Pn）、蒸腾速率（Tr）、气孔导度（Gs）和胞间 CO2浓度（Ci）均表现出明显的分异。迁地保护四合木条件下原生境地栽培的四合木实生苗的光合速率>鄂尔多斯栽培的四合木实生苗的光合速率>阿拉善栽培的四合木实生苗。鉴此可以作进一步推论,孑遗濒危植物四合木从原生境地西鄂尔多斯核心区（乌海）东移进行迁地保护具有更高的生理生态适应性和生境适宜性。但完成“从种子到种子”进而实现“保存性和代表性”,最终实现四合木迁地保护的“保持性和防止性”,保持其遗传多样性和遗传稳定性,最终成功实现四合木的迁地保护仍有待作进一步探索和深入研究。     

检测细胞DNA断裂损伤效应的彗星实验法的改良

为了解决彗星实验过程中常出现的脱胶、细胞核分离操作繁琐、重复性低等问题,对彗星实验方法进行了改良,初步建立了彗星实验的快速操作流程。结果显示,通过对载玻片进行预处理,可确保凝胶悬挂均匀;采用改良机械法分离的细胞核浓度适中;以0.5%(w/v)涂层琼脂糖作为基层、以1.5%(w/v)低熔点包埋琼脂糖作为叠加层的"双层凝胶法",辅以"推片法"铺胶,操作便捷且不发生脱胶现象;细胞核膜经裂解处理后再进行电泳和荧光观察,彗星图像清晰,杂质少。应用改良后的彗星实验方法,操作简便,耗时更短,实验效果良好,可快速检测出细胞DNA损伤效应。     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。     

Applying a new method for direct collection, volume quantification and determination of N2 emission from water

The emission of N₂ is important to remove excess N from lakes, ponds, and wetlands. To investigate the gas emission from water, Gao et al. (2013) developed a new method using a bubble trap device to collect gas samples from waters. However, the determination accuracy of sampling volume and gas component concentration was still debatable. In this study, the method was optimized for in situ sampling, accurate volume measurement and direct injection to a gas chromatograph for the analysis of N₂ and other gases. By the optimized new method, the recovery rate for N₂ was 100.28% on average; the mean coefficient of determination (R²) was 0.9997; the limit of detection was 0.02%. We further assessed the effects of the new method, bottle full of water, vs. vacuum bag and vacuum vial methods, on variations of N₂ concentration as influenced by sample storage times of 1, 2, 3, 5, and 7 days at constant temperature of 15°C, using indices of averaged relative peak area (%) in comparison with the averaged relative peak area of each method at 0 day. The indices of the bottle full of water method were the lowest (99.5%-108.5%) compared to the indices of vacuum bag and vacuum vial methods (119%-217%). Meanwhile, the gas chromatograph determination of other gas components (O₂, CH₄, and N₂O) was also accurate. The new method was an alternative way to investigate N₂ released from various kinds of aquatic ecosystems.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures (24, 28 and 32°C). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide (DMS), dimethyl trisulfide (DMTS), 2-methylisoborneol, geosmin (GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa (first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa (after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Phosphorus recovery from biogas fermentation liquid by Ca–Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 > Ca–Mg/B450 > Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures(24, 28 and 32℃). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide(DMS), dimethyl trisulfide(DMTS),2-methylisoborneol, geosmin(GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa(first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa(after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.     

Mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor

In this study, the mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor were investigated through thermal decomposition methods. The results show that the mercury adsorption performance of the HBr-modified fly ash was enhanced significantly. The mercury species adsorbed by unmodified fly ash were HgCl₂, HgS and HgO. The mercury adsorbed by HBr-modified fly ash, in the entrained-flow reactor, existed in two forms, HgBr₂ and HgO, and the HBr was the dominant factor promoting oxidation of elemental mercury in the entrained-flow reactor. In the current study, the concentration of HgBr₂ and HgO in ash from the fine ash vessel was 4.6 times greater than for ash from the coarse ash vessel. The fine ash had better mercury adsorption performance than coarse ash, which is most likely due to the higher specific surface area and longer residence time.