Time series analysis for the estimation of tidal fluctuation effect on different aquifers in a small coastal area of Saijo plain, Ehime prefecture, Japan

Considering the current poor understanding of the seawater–freshwater (SW–FW) interaction pattern at dynamic hydro-geological boundary of coastal aquifers, this work strives to study tidal effect on groundwater quality using chemical tracers combined with environmental isotopes. In situ measurement data of electrical conductivity and groundwater level along with laboratory measurement data of hydro-chemical species were compared with tidal level data measured by Hydrographic and Oceanographic Department, Saijo City, Japan for time series analysis. Result shows that diurnal tides have significant effect on groundwater level as well as its chemical characteristics; however, the magnitude of effect is different in case of different aquifers. Various scatter diagrams were plotted in order to infer mechanisms responsible for water quality change with tidal phase, and results show that cations exchange, selective movement and local SW–FW mixing were likely to be the main processes responsible for water quality changes. It was also found that geological structure of the aquifers is the most important factor affecting the intensity of tidal effect on water quality.     

A simple and robust method for determination of neem (Azadirachta indica A. Juss) oil in neem oil coated urea

The production of neem oil coated urea (NOCU), a technology developed by the Indian Agricultural Research Institute, has been grown to over 2.0 million tons per year. The estimation of neem oil content in NOCU is important due to its significance in ensuring agronomic efficiency. Therefore, this study was taken up to develop a simple method for the determination of neem oil in NOCU. The procedure involves extraction of neem oil from NOCU; saponification of extracted oil; oxidation of released glycerol to formaldehyde, and subsequent conversion of formaldehyde to a dihydrolutidine derivative. Its concentration was determined spectrophotometrically. The recoveries of neem oil from NOCU with oil load of 500 and 1000?ppm were 87.6?±?3.0% and 90.0?±?4.8% respectively with direct method; and improved to 92.6?±?4.0% and 96.7?±?3.8% after including the in situ purification. A simple method based on the Hantzsch reaction was developed for the determination of neem oil in NOCU. This method is superior to earlier methods in terms of sensitivity, simplicity, and time required.     

A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.     

Redox processes in water remediation

Groundwater is the main source of drinking water and water for agricultural and industrial usage. Therefore, groundwater contamination is prevented and contaminated groundwater is remediated to protect public health and the environment. Methods to remediate groundwater contamination have been recently developed. The use of redox processes in water remediation technologies has not been properly reviewed. Numerous water remediation technologies, such as ultrasonication, bioremediation, electrokinetics and nanotechnology, are closely related to redox processes. Redox processes control the chemical speciation, bioavailability, toxicity, mobility and adsorption of water pollutants in environment. Here, we review (1) general introduction of redox processes, (2) applicability of redox processes in water remediation, and (3) catalytic enhancement of redox potentials to explore its wide applicability in environmental remediation.     

Lost benefits and carbon uptake by protection of Indian plantations

There is a range of problems in assessing how protection of a specific forest to Reduce Emissions from Deforestation and forest Degradation (REDD+) affect global emissions of greenhouse gases. This paper shows how knowledge and information about the biophysical characteristics of forests can be combined with theories of forest management and economic behaviour to derive the impacts on global emissions of REDD+. A modelling experiment from India, where 10% of the forest plantations in eight different regions are protected, shows that the biophysical characteristics of forests are decisive for the global impacts on emissions. In regions with slow-growing forests, agents in the non-protected forests are able to increase their output significantly to fill the demand from the protected forests. This opportunity is strictly limited in regions with fast-growing forests. Therefore, prices increase far more in regions with fast-growing forests than in slow-growing forests. Over time, the markets for Indian forestry products contribute to reduce the resulting price differences across regions. When the carbon uptake from protected forests approaches zero, the leakage of emissions to other Indian forests is between 20 and 40%. Only a small part of this is international leakage. Combining different models also helps to identify knowledge gaps, and to distinguish gaps that potentially may be filled with data and new knowledge, and gaps due to different angling of modelling biophysical processes and modelling of economic behaviour.     

Metal characterization of airborne particulate matters in a coastal region

The concentrations of suspended particulate matter in the air of the Orissa Sand Complex had an average value of 128 ± 10 µg m^?3 in residential areas and 170 ± 8 µg m^?3 in mining areas. PM₁₀ levels in residential areas were found to have an average of 35 ± 10 µg m^?3, in mining areas 45 ± 10 µg m^?3. The distribution of some elements is also discussed here. Inhalation doses were observed to be higher in summer than in winter and the rainy season. The highest dose rate was for the age group of 1 year, and health risks were found to be highest for the same. For adults, inhalation dose and health risk are 1.3 times higher in mining than in residential areas.     

Integrated process approach for degradation of p-cresol pollutant under photocatalytic reactor using activated carbon/TiO2 nanocomposite: application in wastewater treatment

Environmental Science and Pollution Research - Over the years, biodegradation has been an effective technique for waste water treatment; however, it has its own limitations. In order to achieve a...     

Green algae of the genus Spirogyra: A potential absorbent for heavy metal from coal mine water

Algae have considerable capability for absorbing heavy metals from wastewaters and are considered an effective treatment technology. Heavy metal absorption from coal mine water from the Bhowra Abandoned mine (open cast mine) and the Sudamdih Shaft mine (underground mine waters), both located in Dhanbad, India, by cells of Spirogyra was studied at different dilutions (100 percent, 80 percent, 60 percent, 40 percent, and 20 percent). In the present study, the following 18 metals were selected for analysis: aluminium (Al), arsenic (As), silver (Ag), barium (Ba), beryllium (Be), bismuth (Bi), cadmium (Cd), cobalt (Co), chromium (Cr), cesium (Cs), copper (Cu), iron (Fe), gallium (Ga), indium (In), potassium (K), manganese (Mn), nickel (Ni), and vanadium (V). Accordingly, Al and K were found to be higher in concentration with respect to selected metals for both mine waters. The biosorption study revealed that higher amounts of Al, Bi, Co, Cs, Fe, Ga, Mn, Ni, and V were absorbed by algal biomass at 100 percent concentration from both mine waters. The maximum uptake of Cu, As, and Cd was measured at 60 percent, 40 percent, and 20 percent, respectively, for the Bhowra Abandoned mine water. The biosorption equilibrium study revealed that Ag, Al, Ba, Be, Bi, Co, Cr, Cs, Fe, Ga, In, K, Mn, Ni, and V were maximally absorbed by algal biomass at 100 percent concentration from Bhowra mine water, while the maximum uptake by the algal biomass measured for the Sudamidh coal mine water was for Al, As, Bi, Cu, Fe, and Mn at 100 percent concentration. The different physicochemical characteristics of mine water and drinking water standards was also studied. Accordingly, total dissolved solid and chemical oxygen demand concentrations exceeded the drinking water standards for water samples collected from both mines.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.