Can fish gill anomalies be used to assess water quality in freshwater Neotropical systems?

Gill anomalies in two fish species (Geophagus brasiliensis and Astyanax bimaculatus) were compared among three freshwater systems with different water quality: one eutrophic river, one eutrophic reservoir, and one oligotrophic reservoir. The raised hypotheses are that reservoirs with low water quality (eutrophic) have fish with more gills anomalies compared with reservoirs with high water quality (oligotrophic), and that the more stable environmental conditions of eutrophic rivers have fish with better healthy conditions than eutrophic reservoirs that have lesser stable environmental conditions. Gills of 36 adult individuals of G. brasiliensis and 23 of A. bimaculatus collected during the winter 2008 and winter 2009 were examined, and the proportions of occurrence of nine histological alterations were compared for the two species among the three systems using a binomial t test for independent samples. Histological changes in fish gills that are reversible and unspecific, such as epithelial lifting, interstitial edema, leukocyte infiltration, hyperplasia of the epithelial cells, lamellar fusion, and vasodilatation were common in both fish species in the three systems. However, lamellar aneurism, which is a more serious and often irreversible anomaly, and lamellar blood congestion occurred only in fish from the two reservoirs. Alternatively, necrosis occurred more in fish from the river. Fish gill anomalies in both species did not differ between the two reservoirs, despite having different water quality. We rejected the hypothesis that reservoirs with lower water quality have fish with more gill injuries compared with high water quality reservoirs. Moreover, the eutrophic river seems to affect differently the healthy condition of fish species, compared with the eutrophic reservoir.     

Lead isotope ratios in lichen samples evaluated by ICP-ToF-MS to assess possible atmospheric pollution sources in Havana,Cuba

Epiphytic lichens, collected from 119 sampling sites grown over “Roistonea Royal Palm” trees, were used to assess the spatial distribution pattern of lead (Pb) and identify possible pollution sources in Havana (Cuba). Lead concentrations in lichens and topsoils were determined by flame atomic absorption spectrophotometry and inductively coupled plasma (ICP) atomic emission spectrometry, respectively, while Pb in crude oils and gasoline samples were measured by ICP-time of flight mass spectrometry (ICP-ToF-MS). Lead isotopic ratios measurements for lichens, soils, and crude oils were obtained by ICP-ToF-MS. We found that enrichment factors (EF) reflected a moderate contamination for 71% of the samples (EF > 10). The ²⁰⁶Pb/²⁰⁷Pb ratio values for lichens ranged from 1.17 to 1.20 and were a mixture of natural radiogenic and industrial activities (e.g., crude oils and fire plants). The low concentration of Pb found in gasoline (<7.0 μg L^?1) confirms the official statement that leaded gasoline is no longer used in Cuba.     

Mass balance to assess the efficiency of a mechanical-biological treatment

Using mechanical-biological treatment of residual municipal solid waste, it is possible to significantly lower landfill volume and gas and leachate emissions. Moreover, the landfill characteristics are improved. The performance of the Mende (France) mechanical-biological treatment plant is assessed via mass balances coupled with manual sorting according to the MODECOMtrade mark methodology and biochemical methane potential after 90 days of incubation. The site includes mechanical sorting operations, a rotary sequential bioreactor, controlled aerobic stabilisation corridors, maturation platforms, and a sanitary landfill site for waste disposal in separated cells. Results showed that several steps could be improved: after a first sieving step, about 12% of the potentially biodegradable matter is landfilled directly without any treatment; mechanical disintegration of papers and cardboards in the rotary sequential bioreactor is insufficient and leads to a high proportion of papers and cardboards being landfilled without further treatment. Two fine fractions go through stabilisation and maturation steps. At the end of the maturation step, about 54% of the potentially biodegradable matter is degraded. The biochemical methane potential after 90 days of incubation is reduced by 81% for one of the two fine fractions and reduced by 88% for the other one. Considering the whole plant, there is a reduction of nearly 20% DM of the entering residual municipal solid waste.     

Combining TiO2-photocatalysis and wetland reactors for the efficient treatment of pesticides

In the present work the photocatalytic and biological degradation of two commercial mixtures of pesticides (Folimat and Ronstar) and two fungicides (pyrimethanil and triadimenol) has been studied. The evolution of some components of these commercial products (dicofol, tetradifon and oxadiazon) and that of the two fungicides has been monitored by means of HPLC, GC-MS, TOC and toxicity (Lemna minor toxicity test) measurements. The photocatalytic method was able to degrade dicofol, tetradifon, pyrimethanil, triadimenol and the components of Ronstar with the exception of oxadiazon. In addition to this, the photocatalytic method eliminated pyrimethanil toxicity and reduced that of triadimenol by a 90%, Ronstar by a 78% and Folimat by an 87%. Nevertheless, the wetland reactors alone could reduce the toxicity of only the former. Finally, the proper dosage of the water containing the pesticides to a photocatalytic reactor followed by a wetland reactor resulted to be the most successful strategy for the detoxification of the studied compounds and their mixtures.     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

Effect of glyphosate on the microbial activity of two Brazilian soils

Glyphosate [N-(phosphonomethyl)-glycine] is a broad-spectrum, non-selective, post-emergence herbicide that is widely used in agricultural. We studied, in vitro, changes in the microbial activity of typical Hapludult and Hapludox Brazilian soils, with and without applied glyphosate. Glyphosate was applied at a rate of 2.16 mg glyphosate kg(-1) of soil and microbial activity was measured by soil respiration (evolution of CO(2)) and fluorescein diacetate (FDA) hydrolysis over a period of 32 days. We found an increase of 10-15% in the CO(2) evolved and a 9-19% increase in FDA hydrolyses in the presence of glyphosate compared with the same type of soil which had never received glyphosate. Soil which had been exposed to glyphosate for several years had the strongest response in microbial activity. Most probable number (MPN) counts showed that after 32 days incubation the number of actinomycetes and fungi had increased while the number of bacteria showed a slight reduction. After the incubation period, high pressure liquid chromatography (HPLC) detected the glyphosate metabolite aminomethyl phosphonic acid (AMPA), indicating glyphosate degradation by soil microorganisms.     

Airborne bioaerosols and their impact on human health

Bioaerosols consist of aerosols originated biologically such as metabolites, toxins, or fragments of microorganisms that are present ubiquitously in the environment. International interests in bioaerosols have increased rapidly to broaden the pool of knowledge on their identification,quantification, distribution, and health impacts(e.g., infectious and respiratory diseases,allergies, and cancer). However, risk assessment of bioaerosols based on conventional culture methods has been hampered further by several factors such as:(1) the complexity of microorganisms or derivatives to be investigated;(2) the purpose, techniques, and locations of sampling; and(3) the lack of valid quantitative criteria(e.g., exposure standards and dose/effect relationships). Although exposure to some microbes is considered to be beneficial for health,more research is needed to properly assess their potential health hazards including inter-individual susceptibility, interactions with non-biological agents, and many proven/unproven health effects(e.g., atopy and atopic diseases).     

The use of Microtox to assess toxicity removal of industrial effluents from the industrial district of Camaçari (BA, Brazil)

The treatment efficiency, as toxicity removal, of complex effluents from the Industrial District of Cama?ari (BA, Brazil), after biological treatment with activated sludge was evaluated using Microtox. Samples of the equalised effluent (EE) were collected prior to treatment together with samples of the treated effluent (TE), which remained 24 h in the treatment plant. Rehydrated colonies of Vibrio fischeri were exposed to sequential dilutions of EE and TE to assess luminosity interference. Values for EC50 were calculated, together with the respective toxicity units. In all, twenty assays of each effluent type were carried out and the mean toxicity removal was 92.71%, while the chemical oxygen demand (COD) presented mean reduction of 83.04%. There was a variability of an order of magnitude between the Microtox results for the two types of effluents. The mean EC50 values were 2.12 for EE and 47.78% for TE. In spite of its weakness in some conditions, the Microtox system demonstrated to work adequately in assessing effluent toxicity removal in this treatment plant and therefore can be used for further toxicity removal programs.     

Rheological and Mechanical Properties of Poly(lactic acid)/Bio-Based Polyethylene/Clay Biocomposites Containing Montmorillonite and Vermiculite Clays

Journal of Polymers and the Environment - This work aims to investigate the effect of organically modified montmorillonite (OMMT) and vermiculite (OVT) clays on the properties of poly(lactic acid)...     

The Impact of the Macaíba Components Addition on the Biodegradation Acceleration of Poly (Ɛ-Caprolactone) (PCL)

Journal of Polymers and the Environment - Nowadays, there is a need to obtain eco-friendly materials, especially plastics that are responsible for most of the environmental pollution. In this...