Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Technological feasibility and costs of achieving a 50 % reduction of global GHG emissions by 2050: mid- and long-term perspectives

In this article we examine the technological feasibility of the global target of reducing GHG emissions to 50 % of the 1990 level by the year 2050. We also perform a detailed analysis of the contribution of low-carbon technologies to GHG emission reduction over mid- and long-term timeframes, and evaluate the required technological cost. For the analysis we use AIM/Enduse[Global], a techno-economic model for climate change mitigation policy assessment. The results show that a 50 % GHG emission reduction target is technically achievable. Yet achieving the target will require substantial emission mitigation efforts. The GHG emission reduction rate from the reference scenario stands at 23 % in 2020 and 73 % in 2050. The marginal abatement cost to achieve these emission reductions reaches 150/tCO < sub > 2 < /sub > -eq in 2020 and150/tCO₂-eq in 2020 and 600/tCO₂-eq in 2050. Renewable energy, fuel switching, and efficiency improvement in power generation account for 45 % of the total GHG emission reduction in 2020. Non-energy sectors, namely, fugitive emission, waste management, agriculture, and F-gases, account for 25 % of the total GHG emission reduction in 2020. CCS, solar power generation, wind power generation, biomass power generation, and biofuel together account for 64 % of the total GHG emission reduction in 2050. Additional investment in GHG abatement technologies for achieving the target reaches US6.0 trillion by 2020 and US 6.0 trillion by 2020 and US 73 trillion by 2050. This corresponds to 0.7 and 1.8 % of the world GDP, respectively, in the same periods. Non-Annex I regions account for 55 % of the total additional investment by 2050. In a sectoral breakdown, the power generation and transport sectors account for 56 and 30 % of the total additional investment by 2050, respectively.     

Low-carbon transitions in world regions: comparison of technological mitigation potential and costs in 2020 and 2030 through bottom-up analyses

This study focuses on low-carbon transitions in the mid-term and analyzes mitigation potentials of greenhouse gas (GHG) emissions in 2020 and 2030 in a comparison based on bottom-up-type models. The study provides in-depth analyses of technological mitigation potentials and costs by sector and analyzes marginal abatement cost (MAC) curves from 0 to 200 US $/tCO₂ eq in major countries. An advantage of this study is that the technological feasibility of reducing GHG emissions is identified explicitly through looking at distinct technological options. However, the results of MAC curves using the bottom-up approach vary widely according to region and model due to the various differing assumptions. Thus, this study focuses on some comparable variables in order to analyze the differences between MAC curves. For example, reduction ratios relative to 2005 in Annex I range from 9 % to 31 % and 17 % to 34 % at 50 US $/tCO₂ eq in major countries. An advantage of this study is that the technological feasibility of reducing GHG emissions is identified explicitly through looking at distinct technological options. However, the results of MAC curves using the bottom-up approach vary widely according to region and model due to the various differing assumptions. Thus, this study focuses on some comparable variables in order to analyze the differences between MAC curves. For example, reduction ratios relative to 2005 in Annex I range from 9 % to 31 % and 17 % to 34 % at 50 US /tCO₂ eq in 2020 and 2030, respectively. In China and India, results of GHG emissions relative to 2005 vary very widely due to the difference in baseline emissions as well as the diffusion rate of mitigation technologies. Future portfolios of advanced technologies and energy resources, especially nuclear and renewable energies, are the most prominent reasons for the difference in MAC curves. Transitions toward a low-carbon society are not in line with current trends, and will require drastic GHG reductions, hence it is important to discuss how to overcome various existing barriers such as energy security constraints and technological restrictions.     

Economic analysis of biogas and compost projects in a palm oil mill with clean development mechanism in Malaysia

This article is a case study to compare the economic viabilities of biogas generation and compost projects in a palm oil mill in Malaysia with and without clean development mechanism (CDM). Biogas is captured from anaerobic ponds or digester tanks treating palm oil mill effluent (POME) and converted to green renewable electricity for grid connection, while compost is produced from the shredded empty fruit bunch and raw untreated POME. The both technologies were compared by considering the changes of the materials flow and energy balances. A palm oil mill with a capacity of 54?t fresh fruit bunch per hour has the potential to produce either 6.9?GWh of electricity from biogas or fertilizer equivalent to 488?t of nitrogen, 76?t of phosphorus and 1,065?t of potassium per year. The economic analysis for 10?years project term analysis indicated that CDM gave a significant impact and ensured economic viability for both projects with 25?% of internal rate of return (IRR), RM 12.39 million of net present value (NPV) and 3.5?years of payback period (PBP) for biogas project, whereas 31?% of IRR, RM 10.87 million of NPV and 2.9?years of PBP for compost project, respectively. In addition, sensitivity analysis indicated that the profitability of both projects will vary depending on the economic situation, such as electricity price which is based on the government policy, whereas compost price that depend on fertilizer market price with 43?% NPV change in 20?% range of fertilizer value.     

Persistent organic pollutants in breast milk of mothers residing around an open dumping site in Kolkata,India: Specific dioxin-like PCB levels and fish as a potential source

Concentrations of persistent organic pollutants (POPs) such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and organochlorine pesticides were measured in human breast milk collected from mothers residing near an open dumping site and a reference site in Kolkata, India during 2004–2005. POPs were detected in all the human milk samples analyzed, suggesting that residents of Kolkata are widely exposed to these contaminants. Concentrations of dioxin-like PCBs in the samples from the dumping site were significantly higher than in the reference site samples, whereas no such difference was found for PCDDs and PCDFs. In addition, significantly higher concentrations of total PCBs were also observed in the samples from the dumping site than the reference site. Interestingly, concentrations of total and dioxin-like PCBs in the breast milk of mothers from the dumping site significantly increased with the number of years of residence near the dumping site. These results indicate that significant pollution sources of PCBs are present in the dumping site of Kolkata and the residents living around are exposed to relatively higher levels of PCBs. When the residue levels of dioxins and related compounds in fish collected from ponds near the Kolkata dumping site and the reference site were measured, it was found that dioxin-like PCB and TEQ levels in fish from the dumping site were notably higher than those from the reference site. This result indicates that fish is a potential source of PCBs for residents living near the Kolkata dumping site.     

Concentrations of organochlorine pollutants in mothers who gave birth to neonates with congenital hypothyroidism

We have investigated the effects of prenatal exposure to dioxin-like compounds (PCDDs, PCDFs and dioxin-like PCBs), PCBs and organochlorine pesticides (DDT, HCH, chlordane, HCB and their metabolites) on the incidence of congenital hypothyroidism and/or cretinism in Fukuoka, Japan from 2001 to 2004. Thirty-four positive neonates of the mass-screening for cretinism were classified into three groups by the pediatrician after the reevaluation of the serum TSH level, that is, negative in reevaluation group, hyper thyroid stimulating hormone (TSH) emia group and cretinism group. One-hundred and two negative neonates of the mass-screening were classified into the normal group. Concentrations of these organochlorine compounds in the breast milk of mothers, which were considered as the indicator of prenatal exposures to them, were gradually increased from the normal group to the cretinism group in the four groups and were around two times higher in the cretinism group than in the normal group. According to the case-control study adjusted for the parity and mother's age, odds ratios of PCBs, DDT and HCB were 10 (p=0.003), 10 (p=0.003) and 22 (p=0.004), respectively and in dioxin-like compounds, PCDFs showed the highest odds ratio, 9.8 (p=0.005). Based upon those findings, these compounds seemed play an important role in the incidence and/or causation of the cretinism.     

Soil contamination by halogenated polycyclic aromatic hydrocarbons from open burning of e-waste in Agbogbloshie (Accra,Ghana)

Detailed composition of chlorinated and brominated polycyclic aromatic hydrocarbons (Cl-PAHs and Br-PAHs) generated during informal recycling of e-waste and their toxic relevance are still poorly understood. This study investigated the occurrence of Cl-PAHs and Br-PAHs in surface soil samples from the Agbogbloshie e-waste recycling site (Accra, Ghana) using quantitative gas chromatography–mass spectrometry (GC–MS) and comprehensive two-dimensional GC–time-of-flight mass spectrometry (GC × GC–ToFMS) profiling. The results of GC–MS analysis showed elevated concentrations in open e-waste burning areas (160–220 and 19–46 ng/g dry weight for Cl- and Br-PAHs, respectively) with substantial contribution from unidentified compounds (respectively, more than 36 and 70%, based on the total areas of potential peaks). Cl- and Br-PAHs from e-waste burning had a distinctive composition dominated by ring–ring compounds. Several homologue groups not monitored with GC–MS were found using GC × GC–ToFMS: PAHs with up to 5Cl or 3Br, mixed halogenated PAHs and chlorinated methylPAHs. The dioxin-like toxic equivalents of the identified Cl-/Br-PAHs in soils, estimated from their in vitro AhR agonist potencies relative to 2,3,7,8-tetrachlorodibenzo-p-dioxin, were much lower than the range reported for chlorinated and brominated dioxins. However, the toxicity of the unidentified halogenated PAHs remained unclear.     

Pollution sources and occurrences of selected persistent organic pollutants (POPs) in sediments of the Mekong River delta, South Vietnam

The Mekong River delta is one of the largest agricultural land in the Southeast Asia. It plays a very important role for agriculture and fisheries in South Vietnam. However, comprehensive studies on the environmental pollution of persistent organic pollutants (POPs) in Mekong River delta have not been carried out in recent years. In this study, we collected sediment samples from the Mekong River to evaluate the contamination and ecological risks caused by several POPs. The contamination pattern of POPs was DDT>PCBs>CHLs>HCHs>HCB. DDTs are the most abundant pollutants, their concentration ranging from 0.01 to 110 ng/g dry wt, followed by PCBs (0.039-9.2 ng/g dry wt). DDTs and PCBs concentrations were higher in sediment from adjacent to urban areas than those from rural and agricultural sites, suggesting urban areas as important point sources of DDTs and PCBs to the river. Ratio of p,p'-DDT/p,p'-DDE was lower compared to those previously reported. However, some samples still had the ratio higher than 0.5, indicating recent input of DDT into the aquatic environments. This result shows that although the magnitude of contamination decreased over time, recent inputs of DDTs to the river still occur. Some sediment samples had concentrations of DDT compounds higher than the standards from the Canadian Environmental Quality Guideline, suggesting continuous monitoring for POPs contamination in the Mekong River is necessary.     

Isolation of antifungal bacteria from Japanese fermented soybeans, natto

An inhibitory effect of a traditional Japanese fermented food, natto, was found against plant pathogens such as Rhizoctonia solani and Fusarium oxysporum, and the bacteria which showed inhibition were isolated from the natto. Among isolated bacteria, BC-1 and GAc exhibited a strong antagonistic effect in vitro against plant pathogens on an agar medium. The supernatant of bacterial culture also showed strong activity against R. solani, which meant the antimicrobial substances were produced and secreted into the medium. Both of the bacteria were estimated as Bacillus amyloliquefaciens from a partial sequence of the 16s rRNA gene. High performance liquid chromatography analysis clearly showed the production of the lipopeptide antibiotic iturin A by BC-1 and GAc.