Validation of atmospheric aerosols parallel sampling in a multifold device

In this work, particulate matter was collected using an active sampling system consisting of a PM₁₀ (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling took place under flow-controlled conditions. Aerosols were extracted from the filters with water, in defined conditions, and the water-soluble fraction was quantified by ion chromatography (IC) for the determination of inorganic anions (Cl^?, NO₃ ^? and SO₄ ^2?). Equivalent sampling through the various channels was validated. Validation was based on the metrological compatibility of the content results for the various filters. Ion masses are metrologically equivalent when their absolute difference is smaller than the respective expanded uncertainty. When this condition is verified, the studied multifold device produces equivalent samples.     

Impact of water quality on bacterioplankton assemblage along Cértima River Basin (central western Portugal) assessed by PCR–DGGE and multivariate analysis

The information on bacterial community composition (BCC) in Portuguese water bodies is very scarce. Cértima River (central western Portugal) is known to have high levels of pollution, namely organic. In the present work, the BCC from a set of 16 water samples collected from Cértima River Basin and its main tributaries was characterized using 16S rDNA–denaturing gradient gel electrophoresis, a culture-independent molecular approach. Molecular data were related to environmental parameters through multivariate analysis to investigate potential impact of water pollution along the river. Principal component analysis using environmental data showed a water quality gradient from more pristine waters (at the mountain tributaries) to waters with increasingly eutrophic potential (such as Fermentelos Lake). This gradient was mainly defined by factors such as organic and inorganic nutrient sources, electrical conductivity, hydrogen carbonate concentration, and pH. Molecular results showed variations in BCC along Cértima River Basin but in the main river section, a Bacteroidetes phylotype (Flavobacterium sp.) proved to be dominant throughout the river course. Multivariate analysis suggests that spatial variation of BCC along the Cértima River Basin depended mainly on parameters such as Chl a, total suspended solid (TSS), total organic carbon, electrical conductivity, and HCO _boxclose^-_{3}^{-} levels. Bacteroidetes phylotypes were all related to higher electrical conductivity and HCO₃^-_{3}^{-} levels although some of these were also correlated with high SO₄^2-_{4}^{2-} and others with high soluble reactive phosphorus, nitrate, TN, and Kjeld-N levels. The Gammaproteobacteria occurrence was correlated with high SO₄^2-_{4}^{2-} levels. One of the Betaproteobacteria phylotypes showed to correlate with low redox potential (E_h) and high temperature, pH, TSS, and Chl a levels while another one showed a negative correlation with Chl a values.     

Changes in the trade in native medicinal plants in Brazilian public markets

Plants continue to be an important source of new bioactive substances. Brazil is one of the world’s mega-diverse countries, with 20 % of the world’s flora. However, the accelerated destruction of botanically rich ecosystems has contributed to a gradual loss of native medicinal species. In previous study, we have observed a fast and intensive change in trade of medicinal plants in an area of Amazon, where human occupation took place. In this study, we surveyed 15 public markets in different parts of Brazil in search of samples of 40 plants used in traditional medicine and present in first edition of Brazilian Official Pharmacopoeia (FBRAS), published in 1926. Samples of plants commercialized as the same vernacular name as in Pharmacopoeia were acquired and submitted to analysis for authentication. A total of 252 plant samples were purchased, but the laboratory analyses showed that only one-half of the samples (126, 50.2 %) were confirmed as the same plant species so named in FBRAS. The high number of unauthenticated samples demonstrates a loss of knowledge of the original native species. The proximity of the market from areas in which the plant occurs does not guarantee that trade of false samples occurs. The impact of the commerce of the substitute species on their conservation and in public health is worrying. Strategies are necessary to promote the better use and conservation of this rich heritage offered by Brazilian biodiversity.     

Particulate matter levels in a South American megacity: the metropolitan area of Lima-Callao,Peru

The temporal and spatial trends in the variability of PM₁₀ and PM_2.5 from 2010 to 2015 in the metropolitan area of Lima-Callao, Peru, are studied and interpreted in this work. The mean annual concentrations of PM₁₀ and PM_2.5 have ranges (averages) of 133–45 μg m^?3 (84 μg m^?3) and 35–16 μg m^?3 (26 μg m^?3) for the monitoring sites under study. In general, the highest annual concentrations are observed in the eastern part of the city, which is a result of the pattern of persistent local winds entering from the coast in a south-southwest direction. Seasonal fluctuations in the particulate matter (PM) concentrations are observed; these can be explained by subsidence thermal inversion. There is also a daytime pattern that corresponds to the peak traffic of a total of 9 million trips a day. The PM_2.5 value is approximately 40% of the PM₁₀ value. This proportion can be explained by PM₁₀ re-suspension due to weather conditions. The long-term trends based on the Theil-Sen estimator reveal decreasing PM₁₀ concentrations on the order of ?4.3 and ?5.3% year^?1 at two stations. For the other stations, no significant trend is observed. The metropolitan area of Lima-Callao is ranked 12th and 16th in terms of PM₁₀ and PM_2.5, respectively, out of 39 megacities. The annual World Health Organization thresholds and national air quality standards are exceeded. A large fraction of the Lima population is exposed to PM concentrations that exceed protection thresholds. Hence, the development of pollution control and reduction measures is paramount.     

Butyltin levels in several Portuguese coastal areas

This work aimed to report present levels (2007–2008 sampling) of tri- (TBT), di- (DBT), and monobutyltin (MBT) in surface sediments from 11 Portuguese coastal sites and discuss the evolution of BTs contamination in the last two decades. All the samples revealed quantifiable values of TBT, DBT, and MBT with total butyltin concentrations between 1 and 565 ng/g (of Sn in dry sediment). Maximum level of TBT, 66 ng/g, was observed in Sado estuary, at Lisnave site, in the proximity of a big shipyard. MBT decreased site by site by the same order as DBT and TBT did, but its concentrations were much higher in many cases, denoting that TBT contamination was much higher in the past. A comparison with the available previous data confirmed a marked decrease of TBT contamination all over the last years, indicating that the main sources of TBT in Portuguese coastwise stopped effectively.     

Foraminiferal biotopes and their distribution control in Ria de Aveiro (Portugal): a multiproxy approach

Ria de Aveiro, which is located in the centre of Portugal (40° 38′ N, 8° 45′ W), is a well-mixed and complex coastal lagoon that is separated from the sea by a sandy barrier and connects with the Atlantic through an artificial inlet. Tidal currents are the main factor controlling the lagoon’s hydrodynamics and, to a great extent, the sedimentary dynamic. The inner lagoonal zones receive input from several rivers and experience the pressure caused by the accumulation of organic matter and pollutants (namely, trace metals) from diverse anthropic activities. This paper is the first piece of work aiming to recognize, characterize and explain the main benthic foraminiferal biotopes in Ria de Aveiro. To provide a broad overview of this kind of setting, our results are compared to those of previous published studies conducted in similar transitional environments. The research is based on an investigation of 225 sites spread throughout this ecosystem. Utilizing a statistical approach, this study analyses the details of dead benthic foraminiferal assemblages composed of 260 taxa, the texture and composition (mineralogical and geochemical) of the sediment and physicochemical data. On the basis of the results of R-mode and Q-mode cluster analyses, several different biotopes can be defined as marsh biotope/near-marsh biotope; marginal urban/marginal urban mixing biotope; inner-outer lagoon biotope or enclosed lagoon; outer lagoon biotope, mixed sub-biotope; and outer lagoon, marine sub-biotope. These biotopes are related to foraminifera assemblages and substrate type and are influenced by local currents, water depth, chemical and physicochemical conditions, river or oceanic proximity, and anthropogenic impact, as evidenced by the mapping of the six factor loadings of the principal component analysis conducted herein. Based on a similar methodology of analysis as that applied in previous studies in the Lagoon of Venice, comparable biotypes were identified in Lagoon of Aveiro.     

Variability in environmental impacts of Brazilian soybean according to crop production and transport scenarios

Soybean production and its supply chain are highly dependent on inputs such as land, fertilizer, fuel, machines, pesticides and electricity. The expansion of this crop in Brazil in recent decades has generated concerns about its environmental impacts. To assess these impacts, two representative chains supplying soybeans to Europe were identified: Center West (CW) and Southern (SO) Brazil. Each supply chain was analyzed using Life Cycle Assessment methodology. We considered different levels of use of chemical and organic fertilizers, pesticides and machinery, different distances for transportation of inputs and different yield levels. Because transportation contributed strongly to environmental impacts, a detailed study was performed to identify the routes used to transport soybeans to seaports. Additionally, we considered different levels of land occupation and land transformation to represent the impact of deforestation in the CW region. Environmental impacts were calculated for 1000 kg of soybean up to and including the delivery to Europe at the seaport in Rotterdam, at 13% humidity. Overall results showed that the impacts are greater for CW than for SO for all impact categories studied, including acidification (7.7 and 5.3 kg SO₂ eq., respectively), climate change (959 and 510 kg CO₂ eq.), cumulative energy demand (12,634 and 6,999 MJ) and terrestrial ecotoxicity (4.9 and 3.1 kg 1,4-DCB eq.), except eutrophication and land occupation. The same trend was observed for the crop-production stage. Efforts to reduce chemical fertilizers and diesel consumption can reduce CO₂ emissions. Although deforestation for crop production has decreased in recent years, the contribution of deforestation to climate change and cumulative energy demand remains significant. In the CW scenario deforestation contributed 29% to climate change and 20% to cumulative energy demand. Results also showed that although there are different transportation options in Brazil, the current predominance of road transport causes severe environmental impacts. In CW, road transport contributed 19% to climate change and 24% to cumulative energy demand, while in SO it contributed 12% and 15% to these impacts, respectively. Improvements in the logistics of transportation, giving priority to rail and river transports over road transport, can contribute significantly to reducing greenhouse gas emissions and decreasing energy use. Future studies involving Brazilian soybeans should take into account the region of origin as different levels of environmental impact are predicted.     

Garnering support for Pigouvian taxation with tax return: a lab experiment

Environmental Economics and Policy Studies - To test if tax return can effectively and efficiently increase the acceptance of externality taxation, a laboratory experiment with a negative...