Occurrence and distribution of pharmaceuticals in surface water, suspended solids and sediments of the Ebro river basin, Spain

The occurrence of 43 pharmaceuticals belonging to predominant therapeutic classes and their distribution in surface water, suspended solids and sediments has been investigated in the Ebro river basin in the Northeast of Spain. WWTP effluents were found to be a main source of contamination and the spatial distribution was affected by the river flow at the sampling point and corresponding dilution factor, resulting in higher concentrations and higher loads in small tributary rivers than in the Ebro river. The study showed that some compounds are preferentially found bound to suspended solids and not detected in river water. Generally, compounds with basic characteristics (pKa > 7) showed higher tendency to bind to suspended solids. The sediment samples generally presented lower concentrations than suspended solids.     

Forecasting model to assess the potential of secondary lead production from lead acid battery scrap

Environmental Science and Pollution Research - Lead acid battery (LAB) scrap management is an important issue both environmentally and economically. The recovery of lead from battery scrap leads to...     

Minimizing disruptions caused by damming and ensuring the health of downstream ecosystems

In view of the Brazilian Ten‐Year Energy Expansion Plan 2021, this article presents a discussion on environmental flow (e‐flow). The authors analyze the literature to show the evolution of publications concerning e‐flow releases from the perspective of ecosystems services preservation considering results from different case studies from throughout the world. Finally, two main recommendations are drawn regarding e‐flow are: (1) performing a holistic approach to e‐flow planning, including hydrological, hydraulic, water quality, habitat, and riparian zone considerations; and (2) installing in new structures adequate bottom outlets to allow a range of adjustable e‐flow from reservoir dams to reproduce natural flow variations.     

Oxidative properties of ambient PM2.5 and elemental composition: Heterogeneous associations in 19 European cities

We assessed the extent to which constituents of PM_2.5 (transition metals, sodium, chloride) contribute to the ability to generate hydroxyl radicals (OH) in vitro in PM_2.5 sampled at 20 locations in 19 European centres participating in the European Community Respiratory Health Survey. PM_2.5 samples (n = 716) were collected on filters over one year and the oxidative activity of particle suspensions obtained from these filters was then assessed by measuring their ability to generate OH in the presence of hydrogen peroxide. Associations between OH formation and the studied PM constituents were heterogeneous. The total explained variance ranged from 85% in Norwich to only 6% in Albacete. Among the 20 centres, 15 showed positive correlations between one or more of the measured transition metals (copper, iron, manganese, lead, vanadium and titanium) and OH formation. In 9 of 20 centres OH formation was negatively associated with chloride, and in 3 centres with sodium. Across 19 European cities, elements which explained the largest variations in OH formation were chloride, iron and sodium.     

Evaluation of the aggressive potential of marine chloride and sulfate salts on mortars applied as renders in the Metropolitan Region of Salvador--Bahia, Brazil

In recent years, growing interest has focused on determining the performance of materials and evaluating the service life of structures exposed to various environmental forces. In this context, the determination of the aggressive potential of marine salts on mortars used as external renders is critical. The present study aimed to evaluate the spatial distribution of marine salts relative to distance from the sea. This was done by monitoring the deposition rate of chlorides and sulfates in wet candle sensors, located at nine stations scattered around the Metropolitan Region of Salvador, state of Bahia, Brazil. The study also determined the effectiveness of water-soluble salts at penetrating three different types of mortars of varying cement content via deposition and diffusion. The methodology employed enabled an evaluation of the efficiency of the monitoring sensors' measurement of the aggressiveness potential of local marine aerosol, and determination of the comparative performance of the three mortars tested, from the standpoint of resistance to salt penetration. The type and amount of salts captured both in solution and in powder samples extracted from the mortars were determined by ion chromatography. The analysis of the various types of mortars tested indicated which types are more resistant to the aggressive potential of the region's marine aerosol and the distance from the shore where local buildings are liable to be most strongly affected.     

The reliability of experts' opinions in constructing a composite environmental index: The case of ESI 2005

The complexity of the environment demands a well-constructed composite environmental index (CEI) to provide a useful tool to draw attention to environmental conditions and trends for policy purposes. Among the common difficulties in constructing a proper CEI are uncertainties due to the selection of the most representative underlying variables or indicators. A degree of uncertainty accompanies experts' judgments, and to deal with vague, subjective or inconsistent information, logic other than classic is required. This study analyzes a procedure that uses different experts' opinions in constructing a CEI, with the use of paraconsistent annotated logic. For this, a sensitivity analysis of the Environmental Sustainability Index (ESI 2005) was used as an example to assess the reliability of experts' opinions. The uncertainty due to the disagreement in experts' opinions clearly indicates that the forms we presently use to measure and monitor the actual environment are insufficient, that is, there is a lack of a “science of sustainability”.     

Biomagnification of anthropogenic and naturally-produced organobrominated compounds in a marine food web from Sydney Harbour, Australia

Polybrominated diphenyl ethers (PBDEs) and naturally-produced organobrominated compounds, such as methoxylated PBDEs (MeO-PBDEs), have been scarcely studied in the Southern Hemisphere. Yet, sources of the latter group of compounds were found in Southern regions, specifically in Australia. The environmental distribution and biomagnification potential of organobrominated compounds were therefore investigated in a representative aquatic food chain (invertebrates and fish) from the Sydney Harbour, Australia. Mean PBDE concentrations ranged from 6.4 ng/g lipid weight (lw) in squid to 115 ng/g lw in flounder. BDE 47 was the dominant congener, followed by BDE 100. Mean levels of MeO-PBDEs (sum of congeners 2’-MeO-BDE 68 and 6-MeO-BDE 47) were as high as 110 ng/g lw in tailor, with a slight dominance of 2’-MeO-BDE 68. Polybrominated hexahydroxanthene derivates (PBHDs), another class of naturally-produced compounds, were found at variable concentrations and ranged from 4.7 ng/g lw in fanbelly and 146 ng/g lw in tailor. The tribrominated PBHD isomer dominated in the samples, except for luderick and squid. The lower levels of PBDEs found in luderick from the harbour compared to those obtained from the upper Parramatta River indicated a terrestrial (anthropogenic) origin of PBDEs, while the higher levels of MeO-PBDEs and PBHDs in the samples from the harbour confirmed the marine (natural) origin of these compounds. The highest trophic magnification factor (TMF) was found for sum PBDEs (3.9), while TMFs for sum MeO-PBDEs and sum PBHDs were 2.9 and 3.4, respectively. This suggests that biomagnification occurs in the studied aquatic food chain for anthropogenic brominated compounds, but also for the naturally-produced organobromines.     

A soil sampling intercomparison exercise for the ALMERA network

Soil sampling and analysis for radionuclides after an accidental or routine release is a key factor for the dose calculation to members of the public, and for the establishment of possible countermeasures. The IAEA organized for selected laboratories of the ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) network a Soil Sampling Intercomparison Exercise (IAEA/SIE/01) with the objective of comparing soil sampling procedures used by different laboratories. The ALMERA network is a world-wide network of analytical laboratories located in IAEA member states capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. Ten ALMERA laboratories were selected to participate in the sampling exercise. The soil sampling intercomparison exercise took place in November 2005 in an agricultural area qualified as a “reference site”, aimed at assessing the uncertainties associated with soil sampling in agricultural, semi-natural, urban and contaminated environments and suitable for performing sampling intercomparison. In this paper, the laboratories sampling performance were evaluated.     

New roles for farming in a differentiated countryside: the Portuguese example

Throughout Europe, the role of farming as the private provider of public goods and services increasingly valuated by society is today generally acknowledged. Furthermore, in the turn towards rural development concerns, multifunctionality as an attribute of rural space has emerged, justifying the territorial approach of farming. The situation facing the multifunctionality demand is nevertheless not the same in all European regions, which by all means is getting strengthened in the transition towards post-productivism. In some regions, there is a productivist orientation and production has a dominant economic role, while others will need to be supported on other functions to survive economically and socially, or may be best suited to environmental functions alone. The vocation of the rural territories is different, and thus also the functions they are able to support. This paper discusses the concept of multifunctionality of the rural areas, and defines a possible methodological approach towards the identification of the different types of rural areas in Europe, based on the identification of ideal types, through the analysis of selected indicators. The empirical application has been developed for the Portuguese Ministry of Agriculture, aiming at assessing the differentiated characteristics and dynamics of the Portuguese rural territory. Analyzing data from 1990 and 2000, at municipal level, three dimensions have been considered: the land cover, the agricultural sector and the rural community. Combining the three analyses, it was possible to identify different vocations of the rural space, and the role that farming could have in the future for the multifunctionality of the territory. Accordingly, the municipalities have been grouped in types, pre-defined as ideal types. This was a first attempt to understand the differentiation of the rural territory in Portugal. For decision-making it should be further developed. It nevertheless shows that there is clear differentiation concerning the possible landscape functions to be developed between regions and a possible way to assess. It also shows that a territorial approach to agriculture may be the key for the maintenance of the sector in many areas where production by itself, as it has been know until now, may be severely threatened.     

Use and knowledge of fuelwood in three rural caatinga (dryland) communities in NE Brazil

The woody species known, used, and preferred as fuelwood were examined in three rural communities within the county of Soledade, Paraíba State, NE Brazil. Ethnobotanical information was collected using semi-structured interviews with more than 90% of the local households (55 adult residents; 31 women, and 24 males). The interviewees cited 36 plant species as fuelwoods, distributed among 30 genera and 15 families, in addition to two unidentified plants. The plant families represented by the largest numbers of species were Euphorbiaceae, Anacardiaceae, Mimosaceae, Caesalpiniaceae, Sapotaceae, and Fabaceae. The species Caesalpinia pyramidalis Tul. (“catingueira”) was cited with the greatest frequency in all three communities. Within the communities we found significant differences on the number of plants cited and actually used (p < 0.05), indicating that the residents knew more fuelwood species than they effectively harvest. The different distances from the communities to the urban centers were not related to differences on the use or the size of the stocks of fuelwood. Additionally, the study revealed that the communities examined still maintain a significant knowledge of the use of energy-providing plants in spite of the widespread use of liquefied petroleum gas (LPG). Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.