UNCERTAINTY IN ESTIMATING BANKFULL CONDITIONS1

ABSTRACT: Bankfull depth and discharge are basic input parameters to stream planform, stream restoration, and highway crossing designs, as well as to the development of hydraulic geometry relationships and the classification of streams. Unfortunately, there are a wide variety of definitions for bankfull that provide a range of values, and the actual selection of bankfull is subjective. In this paper, the relative uncertainty in determining the bankfull depth and discharge is quantified, first by examining the variability in the estimates of bankfull and second by using fuzzy numbers to describe bankfull depth. Fuzzy numbers are used to incorporate uncertainty due to vagueness in the definition of bankfull and subjectivity in the selection of bankfull. Examples are provided that demonstrate the use of a fuzzy bankfull depth in sediment trans. port and in stream classification. Using fuzzy numbers to describe bankfull depth rather than a deterministic value allows the engineer to base designs and decisions on a range of possible values and associated degrees of belief that the bankfull depths take on each value in that range.     

Electromagnetic fields in offices.

With the increased use of electric and electronic equipment in our offices, our daily exposure to electromagnetic fields has become increasingly complex due to the great variety of the frequency content of the fields. Today focus has shifted from monitors as the dominating sources of electromagnetic fields to other electronic equipment, cabling, nearby substations, power lines and stray currents in buildings. In the last 5 years wireless communication has become common in our offices. These devices use radio frequency waves to communicate and are therefore sources of radio frequency fields in our offices. To a certain degree, they all add to the complicated issue of the extensive field frequencies found in offices. The exposure of office workers is generally considered to be low and not in conflict with the existing guidelines, but if a precaution approach is applied there are a number of measures that can be taken to reduce the electromagnetic fields in offices in order to obtain a good electrical environment.     

Getting the ‘pulse’ of your employees: the use of cardiovascular research in better understanding behavior in organizations

Cardiovascular disease has severe consequences for both individual betterment and organizational health. Yet, organization‐based cardiovascular research remains quite limited. This commentary addresses this void by integrating research dating from the famous Hawthorne experiments with current medical science. It then suggests future organizational research on cardiovascular health and recommends use of specific composite cardiovascular measures to advance our understanding of the organizational implications of cardiovascular disease. Copyright © 2006 John Wiley & Sons, Ltd.     

Locus of control at work: a meta‐analysis

This study meta‐analyzed the relationships between locus of control (LOC) and a wide range of work outcomes. We categorized these outcomes according to three theoretical perspectives: LOC and well‐being, LOC and motivation, and LOC and behavioral orientation. Hypotheses reflecting these three perspectives were proposed and tested. It was found that internal locus was positively associated with favorable work outcomes, such as positive task and social experiences, and greater job motivation. Our findings are discussed in relation to research on core self‐evaluation and the Big Five personality traits. Copyright © 2006 John Wiley & Sons, Ltd.     

试论Java与木材加工业自动化控制和安全生产的关系

Java(Java也是美国加里福尼亚州Sun Microsystems公司的注册商标)正快速成为一种用于加工制造业和系统集成的计算机编程语言。相对于标准C和C^ 计算机语言而言，Java的多功能性和支持众多计算机操作系统和平台的显著特点，使它能在装备有不同计算机平台和控制系统的机械设备上使用提供了最大的方便性。从而提高了木材产品加工过程的安全性。本文就Java软件系统在木材加工和家具加工过程中的应用以及潜在问题进行探讨。     

Leachability testing of metallic wastes.

The performance of two tests, a batch test and a percolation test for the characterization of waste as suggested in the EU council decision 2003/33/EC was investigated. The tests were carried out on two solid waste streams from a metal recycling industry. The concentrations of heavy metals such as Cu, Zn and Pb were more than one order of magnitude lower than the proposed limit values. Generally, batch test values were equal or higher than percolation test values. With the proposed test procedures both materials could be considered as non-dangerous wastes. The test performance was also investigated using a leachant with higher ionic strength instead of demineralized water as prescribed. The results clearly show a significant increase in the concentration of some heavy metals. Total concentrations of phenolic compounds and polychlorinated biphenyls were less than 1 p.p.m. and 2 p.p.b., respectively. The precision of the batch and the percolation tests were on average 48 and 35%, respectively.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the Polish part of the international study.

A group of routine data entry operators (female) was included in the Polish MEPS (musculoskeletal--eyestrain--psychosocial--stress) study. Before the intervention, ergonomic assessment revealed improper working conditions such as inadequate lighting, uncomfortable chairs, and lack of forearm and wrist support while medical examination revealed that trapezius muscle load along with upper arm, head and back angles were higher than advisable. Subjects complained about neck and shoulder pain, visual problems, and psychosocial conditions. The ergonomic intervention included installation of new luminaires and Venetian blinds, new chairs, repair of ventilators, and optometric corrections. The results after the intervention showed mainly improvement in chair comfort, lighting conditions, visual strain, and sitting posture. However, financial limitations did not allow satisfactory completion of the intervention leading to a mixed interpretation of the results.     

A cross-country comparison of short- and long-term effects of an ergonomic intervention on musculoskeletal discomfort, eyestrain and psychosocial stress in VDT operators: selected aspects of the international project.

Three groups of data entry female visual display terminal (VDT) workers from Norway (n = 30), Poland (n = 33) and the USA (n = 29) were compared. Before intervention, the Norwegian group reported more neck pain compared with the Polish group. The Polish group reported less shoulder pain than both the U.S. and the Norwegian groups. The clinical examination documented fewer symptoms and signs of musculoskeletal illness among the Polish participants compared with the Norwegian and the U.S. groups. After intervention, the Norwegian group reported a reduction in neck pain while the U.S. group reported a reduction in shoulder pain. The Polish group reported an increase in neck, shoulder and forearm pain at follow-up compared to after intervention. The Polish group recorded higher flexion of the upper arm at follow-up parallel with an increase of pain in the upper part of the body. Visual discomfort showed variable results in the 3 countries.     

Job level risk assessment using task level strain index scores: a pilot study.

This paper explores 2 methods of modifying the Strain Index (SI) to assess the ergonomic risk of multi-task jobs. Twenty-eight automotive jobs (15 cases and 13 controls) were studied. The first method is based on the maximum task SI score, and the second method is modeled on the NIOSH Composite Lifting Index (CLI) algorithm, named cumulative assessment of risk to the distal upper extremity (CARD). Significant odds ratios of 11 (CI 1.7-69) and 24 (CI 2.4-240) were obtained using the modified maximum task and CARD, respectively. This indicates that modification of the SI may be useful in determining the risk of distal upper extremity injury associated with a multi-task job.     

Safety climate in Finnish- and Swedish-speaking companies.

The aim of this study was to compare assessments made by Finnish- and Swedish-speaking workers in Finland about the safety climate in their companies, because an earlier study showed that the accident frequency of Swedish-speaking workers was one third lower than that of Finnish-speaking workers. 148 Finnish-speaking and 138 Swedish-speaking workers from 14 small and medium-sized companies participated in this study. They filled out a Finnish safety climate questionnaire, the reliability of which was above the acceptable level. There were no differences between the language groups in the total variables of safety climate and safety action. Based on the differences in single items, we interpreted that Swedish-speaking workers stressed collective safety more, whereas Finnish-speaking workers put more emphasis on their personal responsibility for safety.