Impacts of Off-Road Vehicles (ORVs) on Macrobenthic Assemblages on Sandy Beaches

Sandy beaches are the prime sites for human recreation and underpin many coastal economies and developments. In many coastal areas worldwide, beach recreation relies on the use of off-road vehicles (ORVs) driven on the shore. Yet, the use of ORVs is not universally embraced due to social conflicts with other beach user groups and putative environmental consequences of vehicle traffic on sandy shores. Such ecological impacts of ORVs are, however, poorly understood for endobenthic invertebrates of the intertidal zone seawards of the dunes. Consequently, this study quantified the degree to which assemblages of intertidal beach invertebrates are affected by traffic. The study design comprised a series of temporally replicated spatial contrasts between two reference sites (no ORVs) and two beaches with heavy ORV traffic (in excess of 250,000 vehicles per year) located in South-East Queensland, Australia. Macrobenthic assemblages on ORV-impacted beaches had significantly fewer species at substantially reduced densities, resulting in marked shifts in community composition and structure. These shifts were particularly strong on the middle and upper shore where vehicle traffic was concentrated. Strong effects of ORVs were detectable in all seasons, but increased towards the summer months as a result of heavier traffic volumes. This study provides clear evidence that ORVs can have substantial impacts on sandy beach invertebrates that are manifested throughout the whole community. Demonstrating such an ecological impact caused by a single type of human use poses a formidable challenge to management, which needs to develop multi-faceted approaches to balance environmental, social, cultural, and economic arguments in the use of sandy shores, including management of “beach traffic.”     

Evaluation of PFAS treatment technology: Alkaline ozonation

A bench‐scale treatability study was performed to evaluate the effectiveness of alkaline ozonation on removing per‐ and polyfluoroalkyl substances (PFAS) present in groundwater at a former industrial site in Michigan. The study involved testing the PFAS‐impacted groundwater under alkaline ozonating conditions under a range of experimental conditions, including modifying pH, hydrogen peroxide‐to‐ozone molar ratio doses, length of ozonation pretreatment times, and sampling techniques. PFAS‐spiked samples were used to determine if inorganic ions such as fluoride (F^?), sulfate (SO₄^2?), formate (HCOO^?), acetate (CH₃COO^?), and trifluoroacetate (CF₃COO^?) were generated or if there were decreases in total organic fluorine resulting from PFAS treatment. The results from all tests indicate that decreases in PFAS concentrations were due to a combination of removal and destructive mechanisms with enhanced removal under acidic pH ozonation pretreatment conditions. Short‐chain PFAS concentrations increased during the experiments followed by an overall decrease in concentration under continuous alkaline ozonation conditions. Reductions in concentrations in perfluorooctane sulfonic acid of 75–97% were observed. Reductions in concentrations were also observed in other PFAS such as 6:2 FTS, PFHxS, PFOA, and PFNA. To our best knowledge, this is the first time that alkaline ozonation has been performed on PFAS‐impacted water while monitoring a larger suite of PFAS analytes in addition to destruction byproducts. Treatment of PFAS under the conditions discussed in this paper suggests that alkaline ozonation may be a viable remediation option for PFAS‐impacted waters.     

Modeling tensile strength of materials processed by accumulative roll bonding

Nanostructured materials are a relatively new class of materials that exhibit advanced mechanical properties, thus improving performance and capabilities of products, with potential applications in the automotive, aerospace and defense industries. Among the severe plastic deformation (SPD) methods currently used for achieving nanoscale structures, accumulative roll bonding (ARB) is the most favorable method to produce grain refinement for continuous production of metallic sheets at a bulk scale.In this article, a model that describes the evolution of material strength due to processing via accumulative roll bonding was developed. ARB experiments were conducted on CP-Ti Grade 2 at a selected set of conditions. The results showed significant grain refinement in the microstructure (down to ～120 nm) and a two-fold increase in tensile strength as compared to the as-received material. The developed model was validated using the experimental data, and exhibited a good fit over the entire range of ARB processing cycles. To further validate the model and ensure its robustness for a wider array of materials (beyond CP-Ti), a review of efforts on ARB processing was carried out for five other materials with different initial microstructures, mechanical properties, and even crystalline structures. The model was still able to capture the strengthening trends in all considered materials.     

Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.     

Genetic amniocentesis in multiple gestations

Thirty-one genetic amniocenteses involving multiple gestations were performed in the genetics unit between 1976 and 1982. Three sets of triplets were included. Precise locations of the sacs were determined using real-time ultrasonography and successful sampling of all sacs was accomplished. Spontaneous abortions occurred in two normal twins and one normal triplet gestation. Two therapeutic abortions were performed for fetal abnormalities. Two cases of discordance for trisomy 21 (one twin and one triplet) were allowed to continue; the twin case terminated at 25 weeks' gestation with neonatal deaths and the triplets are alive and well.     

基质比对ABR厌氧氨氧化工艺脱氮性能的影响

为解决厌氧氨氧化底物去除不彻底导致总氮去除偏低的问题,通过控制不同的进水基质比,对厌氧折流板反应器(ABR)的厌氧氨氧化脱氮性能进行了研究.结果表明,ABR厌氧氨氧化系统最佳进水N_2~O--N/NH+4-N为1.34,此时NH+4-N和N_2~O--N的去除率同时达到99.99%左右,总氮去除率达到峰值为87%,当进水N_2~O--N/NH+4-N从1逐渐降低至0.49和从1.34逐渐提高至1.62时,反应器对NH+4-N和N_2~O--N的绝对去除量较为稳定,NH+4-N或N_2~O--N过量对ABR厌氧氨氧化系统没有产生明显抑制;此外,不同基质比条件下,NH+4-N和N_2~O--N的去除基本在第1隔室完成,基质比变化对ABR各隔室的脱氮效果没有产生显著影响,ABR厌氧氨氧化系统对基质浓度的变化具有较好的稳定性.     

Experimental studies in the electrostatic precipitation of high-resistivity particulate

A pulsed charging system is described that eliminates reverse ionization inelectrostatic precipitation. The motivating concept is a purely electrical approach. The fundamental characteristic of this method is the relaxation time of the precipitated particulate. Laboratory studies indicate that this powering concept could increase precipitator performance on high-resistivity particulate by more than two orders of magnitude. Pilot results are also presented.     

Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part II: laboratory simulated conditions

In a previous paper, we demonstrated that the main mechanism of degradation of poly(butylene adipate-co-terephthalate) (PBAT) biodegradable mulch films when exposed to field conditions was crosslinking due to the photodegradation from solar radiation. The aim of this work was to determine the effect of crosslinking on the biodegradability of PBAT samples. PBAT films were subjected to UV photodegradation in laboratory simulated conditions to investigate the effects of crosslinking and other major changes in the structure and mechanical properties of the films. Crosslinking caused the films to become more brittle and produced a reduction of the tensile strength and percent elongation. Besides the crosslinking degradation mechanism, chain scission also occurred in the samples. After 45d of biodegradation test, the non-crosslinked PBAT sample reached 60% of mineralization. However, the percent mineralization was reduced when samples were crosslinked. The percent mineralization of samples with 10%, 30%, 50%, and 70% gel content was 36%, 43%, 21%, and 24%, respectively. Our results indicate that crosslinking is a key process underlying the degradation of the PBAT film and did affect the biodegradability of the films, since the samples with greater amount of gel content generally showed less percent mineralization in the biodegradation tests.     

Land Use-related Chemical Composition of Street Sediments in Beijing

BACKGROUND: More than 10 million people are currently living in Beijing. This city faces severe anthropogenic air pollution caused by an intense vehicle increase (11% per year in China), coal combusting power plants, heavy industry, huge numbers of household and restaurant cookers, and domestic heating stoves. Additionally, each year dust storms are carrying particulate matter from the deserts of Gobi and Takla Makan towards Beijing, especially in spring. Other geogenic sources of particulate matter which contribute to the air pollution are bare soils, coal heaps and construction sites occurring in and around Beijing. Streets function as receptor surfaces for atmospheric dusts. Thus, street sediments consist of particles of different chemical compositions from many different sources, such as traffic, road side soils and industry. METHODS: Distributions and concentrations of various chemical elements in street sediments were investigated along a rural-urban transect in Beijing, China. Chemical elements were determined with X-ray fluorescence analysis. Factor analysis was used to extract most important element sources contributing to particulate pollution along a main arterial route of the Chinese capital. RESULTS AND DISCUSSION: The statistical evaluation of the data by factor analysis identifies three main anthropogenic sources responsible for the contamination of Beijing street sediments. The first source is a steel factory in the western part of Beijing. From this source, Mn, Fe, and Ti were emitted into the atmosphere through chimneys and by wind from coal heaps used as the primary energy source for the factory. The second source is a combination of traffic, domestic heating and some small factories in the center of Beijing discharging Cu, Pb, Zn and Sn. Calcium and Cr characterize a third anthropogenic element source of construction materials such as concrete and mortar. Beside the anthropogenic contamination, some elements like Y, Zr, Nb, Ce, and Rb are mainly derived from natural soils and from the deserts. This is supported by mineral phase analysis, which showed a clear imprint of material in road dusts coming from the West-China deserts. CONCLUSIONS: Our results clearly show that the chemical composition of urban road dusts can be used to identify distinct sources responsible for their contamination. The study demonstrates that the chemistry of road dusts is an important monitor to assess the contamination in the urban environment. Chemical composition of street sediments in Beijing comprises the information of different sources of atmospheric particles. RECOMMENDATIONS AND OUTLOOK: This study is only a small contribution to the understanding of substance fluxes related to Beijing's dust. More effort is required to assess Beijing's dust fluxes, since the dust harms the living quality of the inhabitants. Especially the measurable superimposing of long scale transported dust from dry regions with the anthropogenic polluted urban dust makes investigations of Beijing's dust scientifically valuable.     

A capabilities approach to the prioritization of critical infrastructure

As a consequence of the U.S. effort to increase infrastructure security and resilience, the Department of Homeland Security (DHS) and other U.S. federal agencies have identified 16 critical infrastructure sectors that are considered vital to the nation’s well-being in terms of economic security, public health, and safety. However, there remains no articulated set of values that justify this particular list of infrastructure systems or how decision-makers might prioritize investments towards one critical sector over another during a crisis. To offer a more integrated and holistic approach to critical infrastructure resilience, this research employs the capabilities approach to human development, which offers an alternative view of critical infrastructure that focuses on the services that infrastructure provides rather than its physical condition or vulnerability to threats. This service-based perspective of infrastructure emphasizes the role of infrastructure in enabling and supporting central human capabilities that build adaptive capacity and improve human well-being. We argue that the most critical infrastructure systems are those that are essential for providing and/or supporting central human capabilities. This paper examines the DHS designation of criticality from a capabilities perspective and argues for a capabilities basis for making distinctions between those systems that should be considered most critical and those that might be temporarily sacrificed. A key implication of this work is that an across sector approach is required to reorganize existing critical infrastructure efforts around the most valuable infrastructure end-services.