Examination of the influence of dissolved halite (NaCl) on the leaching of lead (Pb) from cement-based solidified wastes

The leaching of lead from cement-based solidified waste forms mixed at different water/cement ratios was studied by conducting equilibrium and semi-dynamic leaching tests using deionized water and sodium chloride solutions. The results suggest that leaching of the primary constituents of the cement (calcium, silicon and sulfate) is controlled by solubility equilibria, with increased leaching into chloride solutions due to ionic strength effects. The original porosity of the waste forms increased with water/cement ratio and chloride solutions further increased it as a result of decalcification. Lead leaching was generally low, and appears to be a transport-controlled process, such that leaching correlates positively with porosity.     

Bewertung der Umweltgefährlichkeit von Stoffen

By sending a questionnaire to all companies of the pulp and paper, textile finishing and leather industries in Germany a study ascertained wastewater data concerning the general situation, treatment processes and specific amounts. With these data standard figures used in the EU for the assessment of chemical substances were checked. The volume flows of the industrial sewage treatment were determined for the facilities of all three branches which discharge their wastewater directly to the receiving waters. The 10 percentile score of these facilities amounted to only a quarter of the EU standard figure of 2,000 m³/d. This value is related to a standardised waste water treatment plant within the EU, which treated the wastewater of 200 l/d from 10,000 inhabitants. The analyses of the entire branch in each case yield dilution factors of 20–70% of the EU standard value of 10. Only the full tanning leather companies yielded a dilution factor of 10. The volume flows of the sewage treatment plants of the facilities discharging to the sewer system exceeds 2,000 m³/d in call cases.     

What Lies Beneath? An Evaluation of Rapid Assessment Tools for Management of Hull Fouling

Despite an increased understanding of marine invasions, non-indigenous species (NIS) continue to be redistributed at both global and regional scales. Since prevention is an important element of NIS programs, monitoring vectors responsible for NIS introductions and spread, such as hull fouling, has become a priority and methods should be selected carefully to balance accuracy, time, and cost. Two common fouling assessment tools for the marine recreational boating vector were evaluated for accuracy using a traditional underwater SCUBA survey in coastal British Columbia: a dockside level of fouling assessment and a behavioral questionnaire model. Results showed that although rapid, dockside assessments did not provide an accurate assessment of fouling present below the surface, at least not in this region. In contrast, a questionnaire-based model using four easily obtained variables (boat type, age of antifouling paint, storage type, and occurrence of long distance trips) reliably identified boats carrying macrofouling species, a proxy for risk of NIS transport. Once validated, this fouling model tool could be applied in border inspection or quarantine situations where decisions must be made quickly. Further development and refinement of rapid assessment tools would improve our ability to prevent new introductions and manage spread of existing invasive species.     

Application of a compact all solid-state laser system to the in situ detection of atmospheric OH,HO2, NO and IO by laser-induced fluorescence

A tuneable, high pulse-repetition-frequency, solid state Nd:YAG pumped titanium sapphire laser capable of generating radiation for the detection of OH, HO2, NO and IO radicals in the atmosphere by laser induced fluorescence (LIF) has been developed. The integration of the laser system operating at 308 nm into a field measurement apparatus for the simultaneous detection of hydroxyl and hydroperoxy radicals is described, with detection limits of 3.1 x 10(5) molecule cm(-3) (0.012 pptv in the boundary layer) and 2.6 x 10(6) molecule cm(-3) (0.09 pptv) achieved for OH and HO2 respectively (30 s signal integration, 30 s background integration, signal-to-noise ratio = 1). The system has been field tested and offers several advantages over copper vapour laser pumped dye laser systems for the detection of atmospheric OH and HO2 radicals by LIF, with benefits of greater tuning range and ease of use coupled with reduced power consumption, instrument footprint and warm-up time. NO has been detected in the atmosphere at approximately 1 ppbv by single photon LIF using the Alpha 2Sigma+ <-- Chi 2Pi1/2 (0,0) transition at 226 nm, with absolute concentrations in good agreement with simultaneous measurements made using a chemiluminescence analyser. With some improvements in performance, particularly with regard to laser power, the theoretical detection limit for NO is projected to be approximately 2 x 10(6) molecule cm(-3) (0.08 pptv). Whilst operating at 445 nm, the laser system has been used to readily detect the IO radical in the laboratory, and although it is difficult to project the sensitivity in the field, an estimate of the detection limit is < 1 x 10(5) molecule cm(-3) (< 0.004 pptv), well below previously measured atmospheric concentrations of IO.     

Release of dissolved organic matter from natural populations of marine phytoplankton

A new method is presented for measuring the rate of release of dissolved organic matter (DOM) produced by natural populations of marine phytoplankton. The method has been field-tested using natural populations of estuarine, coastal, and oceanic phytoplankton. Problems associated with the necessity for long incubation times, high initial activity of the inorganic ¹⁴C added to the sample, and self-absorption are overcome. Improved sensitivity is obtained by utilizing a large portion of the sample filtrate, Results from sampling at different times of day and for different lengths of incubation suggest that these problems should be reexamined in terms of both the percent and rate of relase of DOM from natural populations of phytoplankton. The rate of release of DOM from natural populations of marine phytoplankton decreases seaward. Phytoplankton in Georgia (USA) estuaries release <1 to 40 mg C m^-3 day^-1, in southeastern USA coastal waters from 0 to 19 mg C m^-3 day^-1, and in the westernmost Sargasso Sea from 0 to 2 mg C m^-3 day^-1. The percent of photoassimilated carbon released as DOM increases seaward. The percents are less than 7% in the Georgia estuaries, generally less than 13% in southeastern USA surface coastal waters, generally less than 21% for these coastal waters below the surface, and less than 44% for the westernmost Sargasso Sea. The results of this study and of other studies suggest that the measurement of primary productivity in estuarine and nearshore coastal waters is not seriously in error because of the absence of measurements on the rate of release of DOM from such phytoplankton. However, the estimation of primary-productivity values for oceanic waters is underestimated in some cases by about 50%.Contribution No. 595 from the Department of Oceanography, University of Washington, Seattle, Washington, USA and Contribution No. 224 from the University of Georgia Marine Institute, Sapelo Island, Georgia, USA.Extracted in part from a dissertation submitted to the Graduate Faculty of the University of Georgia in partial fulfillment of the requirements for the degree of Doctor of Philosophy.     

恢复力与可持续发展:在瞬息万变的世界中增强适应能力

由于在以往的自然资源政策上逐渐暴露出了两个带根本性的错误,人们开始意识到在环境管理理论和实践方面需要进行一场全球性的重大改革.第一个错误是毫无保留地假定生态系统对人类利用所作出的反应是呈线性关系、是可以预测和控制的.第二个错误是认定人类社会与天然系统可以分别对待,不必联系在一起进行考虑.然而,从世界各地收集到的证据表明,天然系统和人类社会系统是以非线性方式运行的、在其动态运行过程中均有其显著的极限,而且,人类社会与生态系统表现为一种紧密相联的、复杂的且不断演变的综合系统.本文是代表瑞典政府环境咨询委员会编写的一份报告的摘要,这份报告是作为向2002年8月26日～9月4日在南非约翰内斯堡召开的可持续发展世界首脑会议献礼的论文而撰写的.从概念上说,恢复力是一种能缓冲变化所带来的影响、学习知识和求得发展的能力,我们将它作为在一个纷纭复杂、快速变化的世界中,是否真正懂得如何维护和提高适应能力的一种参照标准来使用.在社会、生态综合系统中,有两种有用的工具可用来提高恢复力,一种是结构严谨的工作方案,另一种是积极的适应力管理.这两种工具都需要而且有助于形成这样一种社会环境:具有灵活开放的组织机构和多层次的监管体制,允许学习适应力方面的知识和提高适应力但又不妨碍对未来的发展作出选择.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

Environmental gradients in northwest freshwater wetlands

Wetland environmental characteristics are examined to determine their spatial and temporal relationships. Two very different Oregon freshwater wetlands provided a range of wetland types. Results are evaluated to determine the possible use of environmental characteristics in defining wetlands and their boundaries. Representative physical, hydrological, and edaphic properties were periodically measured in microplots along upland/wetland transects. A multivariate approach is stressed in the data analysis; correlation, cluster analysis, and principal components analyses were used. The results indicate the environmental characteristics change in a quantifiable manner both spatially and temporally. The controlling mechanism is moisture, spatially in terms of the upland/wetland transect and temporally with respect to seasonal response. These changes do not correlate well with vegetation. Several hypotheses are offered as an explanation. Correlation within environmental characteristics is variable but definite patterns are discernible. These data suggest both single and combinations of environmental characteristics that could serve as keys in wetland identification and boundary determination. However, before extensive use is made of this information additional long-term monitoring of wetland environmental characteristics will be required.     

The Effects of Repairs on Tailpipe Emissions for On-Board Diagnostics II-Equipped Vehicles with the Malfunction Indicator Light Illuminated

Abstract

A total of 77 On-Board Diagnostics II (OBDII)-equipped vehicles with illuminated malfunction indicator lights (MILs) and non-evaporative codes were tested before and after repair. The test cycles included the Federal Test Procedure (FTP), IM240, and steady-state cycles. A total of 17 vehicles were found with emissions greater than 1.5 times their respective FTP emissions standards. Repair of these vehicles resulted in dramatic reductions in overall emissions for all the cycles. A majority of the remaining vehicles were found to have emissions below the certification standard for the FTP both before and after repair. Repairs for the vehicles with emissions <1.5 times the standard resulted in some smaller but quantifiable emission reductions over the FTP and IM240 but larger reductions over the steady-state driving tests. Misfires, bad oxygen sensors, and exhaust gas recirculation (EGR) problems were the most common non-evaporative causes for triggering the MIL. The results show some fundamental differences between identifying malfunctioning vehicles using OBDII as opposed to more traditional dynamometer tests. In particular, for many systems, OBDII identifies components that are operating outside their design specification rather than for a specific emissions threshold.