Biological complexity confounds the separation of point- and non-point sources of human impact on the natural world

Identifying process from pattern is one of the most vexing tasks inenvironmental monitoring. Given information on the distribution of speciesin a pre-defined area, together with comprehensive data on how environmentalconditions in that area have altered through time, is it possible toidentify the factors controlling the species‘ layout? Here, the practicalsignificance of this quandary is demonstrated using a series ofenvironmentally-degraded coastal lagoons in New South Wales. The TuggerahLakes (33°17′S,151°30′E) have over the last 50 yearsexperienced significant changes in species‘ distributions. Seagrasses,macroalgae, phytoplankton, molluscs, prawns and the jellyfish Catostylus mosaicus have altered in spatial pattern. Two human activitieshave been blamed for these perturbations: (1) agricultural clearance ofnative vegetation from the catchment, with associated input of top-soil andnutrients; (2) the commissioning of a coal-fired power station in 1967, withmassive uptake and recirculation of lake water for cooling purposes. In thispaper, spatial changes in macrophyte distributions over the last 50 yearsare reviewed in an attempt to identify the true source(s) of perturbation.The model adopted assumes that the power station is a point source of impactwhile nutrient inputs from the catchment are a diffuse source of impact;changes in species distributions can hypothetically be related back to thesesources according to whether they are localised or widespread. However,after a comprehensive analysis of available macrophyte data derived frominterviews, aerial photography and line transect methodologyies theconclusion is reached that changes in biogeographical pattern around theTuggerah Lakes cannot be attributed to specific anthropogenic pressures atanything beyond the coarsest of levels. This is considered to be the normfor most coastal management situations where natural background variation(’noise‘) and the complexity of linkages between physical, chemical andbiological components confounds the identification of causal relationships.The practical implications of this conclusion are discussed in the contextof litigation and remedial management design. Emphasis is placed on theneed to adopt an adaptive approach to estuarine management, incorporatingexplicit recognition of the limitations of available data, and to developnew techniques for identifying cause-effect relationships.     

Methods for constructing and balancing ecosystem flux charts: new techniques and software

We describe a general computer program which employs novel techniques to analyze carbon (energy) and nutrient flows in complex food webs. The program uses estimates of metabolic/physiological parameters and ecosystem fluxes to simultaneously calculate the most likely balanced flux charts for carbon and a nutrient. We give an example of how the model can explore the theoretical issues involved with nutrient limitation and recycling.     

Development of a practical forest ecosystem classification from existing biophysical studies: An approach used in northwestern Quebec

While forest ecosystem classification work in Quebec has traditionally concentrated on inventory and mapping, more effort is now being placed on developing field guides similar to those produced in other Canadian provinces. As part of a project to produce a practical forest ecosystem field guide for the Amos Lowlands Ecological Region in northwestern Quebec, existing sub-regional ecological studies were exploited in order to develop a regional classification of forest ecosystems, or forest stations. Review of four fundamental studies provided a list of 107 ecological phases, each representing a particular combination of forest composition, surface deposit type and moisture regime. A series of silvicultural and environmental interpretations were developed and values for each were attributed to the ecological phases. Cluster analysis was then performed to classify phases into 29 broader units. A large, regional biophysical database which became available later in the project provided a means of validating and effectively modifying the classification. The justifications for using the original approach are discussed.     

HNO_3─KI─MIBK萃取／原子吸收光谱法测定固体废物浸提液中的微量银

采用选择性较好的ＨＮＯ３—ＫＩ—ＭＩＢＫ萃取体系对铋渣和尾矿渣浸出液中的痕量银进行预分离富集后，用火焰原子吸收法（ＡＡＳ）进行测定。此法不仅变异系数小（约为３．１％），而且检出限比直接火焰ＡＡＳ法降低两个数量级，达０．５ｎｇ／ｍｌ．另外，还就作品细度对银测定结果的影响原因做了初步探讨。     

Fuel characteristics and emissions from biomass burning and land-use change in Nigeria

Nigeria is one of the 13 low-latitude countries that have significant biomass burning activities. Biomass burning occurs in moist savanna, dry forests, and forest plantations. Fires in the forest zone are associated with slash-and-burn agriculture; the areal extent of burning is estimated to be 80% of the natural savanna. In forest plantations, close to 100% of litter is burned. Current estimates of emissions from land-use change are based on a 1976 national study and extrapolations from it. The following non-carbon dioxide (CO₂) trace gas emissions were calculated from savanna burning: methane (CH₄), 145 gigagrams (Gg); carbon monoxide (CO), 3831 Gg; nitrous oxide (N₂O), 2 Gg; and nitrogen oxides (NO_x), 49 Gg. Deforestation rates in forests and woodlands are 300 × 10³ ha (kilohectare, or kha) and 200 × kha per year, respectively. Trace gas emissions from deforestation were estimated to be 300 Gg CH₄, 2.4 Gg N₂O, and 24 Gg NO_x. CO₂ emissions from burning, decay of biomass, and long-term emissions from soil totaled 125 561 Gg. These estimates should be viewed as preliminary, because greenhouse gas emission inventories from burning, deforestation, and land-use change require two components: fuel load and emission factors. Fuel load is dependent on the areal extent of various land uses, and the biomass stocking and some of these data in Nigeria are highly uncertain.     

The efficacy of a limestone doser to mitigate stream acidification in a Maryland coastal plain stream: Implications for migratory fish species

The objective of this two-year study was to determine the efficacy of an automated limestone slurry doser to neutralize acidic pulses and improve water quality conditions for enhancing survival of early life stages of migratory fish species in a Maryland coastal plain stream. Implications for survival of early life stages of migratory fish species such as yellow perch (Perca flavescens), white perch (Morone americana), blueback herring (Alosa aestivalis) and alewife (Alosa pseudoharengus) are discussed based on the improved chemical conditions in the dosed area of the stream. Despite problems with overdosing in 1991 and failure of the stage transducer to work properly in 1992, the doser was generally effective in neutralizing acidic pulses (pH depressions) in the stream during three major rain events in both years. Chemical conditions (pH and inorganic monomeric aluminum) reported in the non-dosed area during major rainfall events were potentially stressful to both alewife and blueback herring although neither species was reported spawning in the stream during either year. Mitigating the potential impact of acidic conditions on early life stages of important migratory fish species was not sufficient to ensure spawning. It is therefore recommended that habitat improvement measures and well designed fish stocking programs be implemented concurrently with doser operations if the goal is to create optimum spawning conditions for migratory species.     

沙湾荒漠区生态环境的植物监测

利用植物生态学常规方法进行了荒漠植被种群生物量和数量特证调查,以植物为监测对象,并就群落地上部分生物量,Shannon-Wiener多样性指数,群落均匀度,生态优势度等指标探讨了在荒漠生态环境监测和评价中的具体应用。     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Application of multimedia exposure assessment to drinking water

A potentially important exposure route for humans is the ingestion of chemicals via drinking water. If comprehensive exposure assessments are to be completed for either existing or proposed new chemicals and cost effective control strategies developed, then a quantitative understanding of multimedia transport and fate of specific chemical pollutants must be achieved. Mathematical models provide a powerful framework into which quantitative relationships may be placed to provide guidance in reaching water quality goals. Existing, state-of-the-art media-specific toxic organic transport and fate models for atmospheric (DiDOT), land surface (NPS) and surface water processes (EXAMS) and potable water treatment (WTP) have been linked to demonstrate the technical feasibility of such an approach. Limited application and sensitivity testing of this linked modeling system has shown that the impact of various source loadings and control strategies on drinking water quality can be estimated.