Municipal solid waste in situ moisture content measurement using an electrical resistance sensor

Moisture content (MC) is a crucial parameter for degradation of solid waste in landfills. Present MC measurement techniques suffer from several drawbacks. A moisture sensor for measurement of in situ moisture content of solid waste in landfills was developed. The sensor measures the electrical resistance across the granular matrix of the sensor, which in turn can be correlated to moisture content. The sensor was also equipped with a thermocouple and tubing that permits simultaneous measurement of temperature and gas sampling. The electrical conductivity of the surrounding moisture and the temperature in the matrix both affect the resistance measurements. This paper describes the results of laboratory experiments designed to select the appropriate granular media particle size, measure the influence of moisture electrical conductivity and temperature, and develop calibration relationships between measured resistance and gravimetrically determined moisture content. With a few limitations, the sensor is able to detect MC of solid waste under conditions allowing moisture movement into the sensor. The application of this technique shows promise for use in bioreactor landfills where high moisture contents are expected and desired.     

Adsorption and transport of arsenic(V) in experimental subsurface systems

The adsorption and transport of As(V) in a heterogeneous, iron oxide-containing soil was investigated in batch and column laboratory experiments. The As(V) adsorbed rapidly to the soil over the first 48 h, but continued to adsorb slowly over the next several weeks, clearly indicating the potential for rate-limited transport. The equilibrium As(V) adsorption isotherm was markedly nonlinear, further indicating the potential for nonideal transport. A model developed for the adsorption of As(V) to hydrous ferric oxide (HFO) was able to predict the pH-dependent adsorption of As(V) to the soil in batch experiments within 0.116 to 0.726 root mean square error (RMSE). Arsenic(V) was significantly retarded in column transport experiments. The column transport experiments were modeled using the one-dimensional advection-dispersion equation, considering both linear and nonlinear adsorption equilibrium. Although the nonlinear local equilibrium model (NLLE, RMSE = 0.273) predicted the data better than the linear local equilibrium model (LLE, RMSE = 0.317), As(V) breakthrough occurred more rapidly than predicted by either model due to adsorption nonequilibrium. However, due to the presence of an irreversible or slowly desorbing fraction, the peak aqueous As(V) concentration (0.624 mg L(-1)) and the total amount of As(V) recovered (44%) was lower than predicted based on the two equilibrium models (NLLE and LLE). For the conditions used in this study [1 mg L(-1) As(V), pH 4.5 and 9,0-0.25 mM PO4, 0.53-1.6 cm min(-1) pore water velocity], the effect on As(V) mobility and recovery increased in the order pH < pore water velocity < PO4.     

Landscapes for tomorrow

Seven different landscapes that might realistically represent the Yorkshire Dales National Park in the lifetime of the present generation were created out of detailed interviews with policy managers, landowners and farmers. These landscapes were imaged in the form of water colour paintings, then incorporated with appropriate explanatory commentary into a large graphic display, a video sequence, a floor game and a leaflet. The interpretive material was taken to the public as a touring exhibition, travelling around the National Park over two consecutive summers. The exhibition was designed to be participatory: its purpose to discover how far people could grasp the processes leading to landscape change, become aware of why these forces were happening and become sufficiently concerned for the future to participate in the creation of landscape design of their choice. The results revealed that the approach experimented with was successful in meeting its aims, that those less conversant with the issues were more influenced than those already familiar with some of the causes of change and that participatory interpretation can be a highly educative and enjoyable experience.     

DEVELOPMENT OF AN INTERDISCIPLINARY PLANNING MODEL FOR WATER AND FISHERY MANAGEMENT1

ABSTRACT: This paper describes the development of an interdisciplinary model that analyzes the effects of resource management decisions on New Mexico fishery production, yield, sportfishing effort, and economic benefit to anglers. The model recreates river flows and materials transported through reservoirs and their tailwaters from 1974 through 1987. Solar radiation, water temperature, phosphorus, nitrogen, suspended solids, and water exchange rates determine primary production. Organic loads from watershed sources, added to primary production, form a trophic base for sportfish forage. Fish production is partitioned into biomass and growth of each age class in sportfish and forage fish groups by differential responses to food type, light, water-level fluctuation and predation. Fish biomass, with angler population distribution and site condition, contributes to determining angler effort and economic benefits. Model users can vary and analyze water level and quality, stocking, fishing regulations, site access, site facilities, and site entry fees. The model (on floppy disks with a user manual) is available for operation on MS DOS compatible computers with a hard disk. Contact R. M. Wilson, NMGF, State Capitol, Santa Fe, New Mexico, 87503.     

Traumatic work-related fatalities in forestry and sawmill workers in Australia

Work-related traumatic forestry and sawmill fatalities were studied as part of a larger study of all work-related traumatic fatalities in Australia from 1982 to 1984. Data on 79 cases were obtained from inspection of coroners' files. The fatality incidence per 100,000 person-years was extremely high for loggers (396), and high for forest service workers (52) and workers employed in sawmills (30), compared to the entire Australian workforce (8.1). Felling/trimming trees, traffic-related activities and operating heavy machinery (forestry workers) and loading/unloading logs and operating bench saws (sawmill workers) were the most common tasks being performed at the time of the fatal injury. Being struck by a falling tree, often one that had been disturbed by the tree being felled, was the most common mechanism of fatal injury. Isolation, poor work practice, errors of judgement, and equipment problems were the most common contributing factors to the fatal incidents. Emphasis on correct work practice and training (especially in felling), equipment maintenance, and availability of communication and medical retrieval in isolated areas are recommended.     

Modeling Stream Channel Characteristics From Drainage‐Enforced DEMs in Puget Sound,Washington, USA1

Abstract: Mapping stream channels and their geomorphic attributes is an important step in many watershed research and management projects. Often insufficient field data exist to map hydromorphologic attributes across entire drainage basins, necessitating the application of hydrologic modeling tools to digital elevation models (DEMs) via a geographic information system (GIS). In this article, we demonstrate methods for deriving synthetic stream networks via GIS across large and diverse basins using drainage‐enforced DEMs, along with techniques for estimating channel widths and gradient on the reach scale. The two‐step drainage enforcement method we used produced synthetic stream networks that displayed a high degree of positional accuracy relative to the input streams. The accuracies of our estimated channel parameters were assessed with field data, and predictions of bankfull width, wetted width and gradient were strongly correlated with measured values (r² = 0.92, r² = 0.95, r² = 0.88, respectively). Classification accuracies of binned channel attributes were also high. Our methodology allows for the relatively rapid mapping of stream channels and associated morphological attributes across large geographic areas. Although initially developed to provide salmon recovery planners with important salmon habitat information, we suggest these methodologies are relevant to a variety of research and management questions.     

Predicting River Floodplain and Lateral Channel Migration for Salmon Habitat Conservation1

Abstract: In this article, we describe a method for predicting floodplain locations and potential lateral channel migration across 82,900 km (491 km² by bankfull area) of streams in the Columbia River basin. Predictions are based on channel confinement, channel slope, bankfull width, and bankfull depth derived from digital elevation and precipitation data. Half of the 367 km² (47,900 km by length) of low‐gradient channels (≤ 4% channel slope) were classified as floodplain channels with a high likelihood of lateral channel migration (182 km², 50%). Classification agreement between modeled and field‐measured floodplain confinement was 85% (κ = 0.46, p < 0.001) with the largest source of error being the misclassification of unconfined channels as confined (55% omission error). Classification agreement between predicted channel migration and lateral migration determined from aerial photographs was 76% (κ = 0.53, p < 0.001) with the largest source of error being the misclassification of laterally migrating channels as non‐migrating (35% omission error). On average, more salmon populations were associated with laterally migrating channels and floodplains than with confined or nonmigrating channels. These data are useful for many river basin planning applications, including identification of land use impacts to floodplain habitats and locations with restoration potential for listed salmonids or other species of concern.     

Wildfire Effects on the Quantity and Composition of Suspended and Gravel-Stored Sediments

In August of 2003 a severe wildfire burnt the majority of Fishtrap Creek, a 170 km² catchment in central British Columbia, Canada. The objective of this study was to determine the short-term (15-month) influence of the wildfire on the amount and composition of fine sediment delivery and retention in the system and to compare it to a similar unburnt catchment. In the spring of 2004 automatic water samplers were installed at a gauging site on Fishtrap Creek to collect suspended sediments from the snowmelt runoff and gravel traps were deployed on the channel bed surface to collect composite samples of suspended fine sediment. Jamieson, the reference creek, exhibits similar geology and pre-burn vegetation and was sampled in the same manner for comparison. Composite suspended sediment collected in the traps was removed from the streams in mid-summer and early September. Quantitative estimates of the amount and particle size structure of the naturally stored fine sediment in, and on, the gravel creekbed were obtained in pre-melt, mid and late-summer conditions. Estimates of suspended sediment yields indicated that while the burnt system delivered 66% more material per unit area, the total seasonal suspended sediment yield was low (855 kg km⁻²) compared to other fire-disturbed systems. While the burnt catchment was primed to deliver sediment, the hydrologic drivers were not of sufficient magnitude to generate a substantial response, suggesting that in this first post-fire year the system was transport-limited, not supply-limited. Differences were noted in the spatial and seasonal composition of the <500 more OM% composite suspended sedimentswith the burnt catchment having significantly (P≤0.05) more OM%. Seasonally a significant increase of OM% in late summer samples was associated with instream biofilms and possible delivery of black carbon. The system’s post-fire response was not geomorphically substantial but significant biological differences were noted in the short-term.     

STATEWIDE EMPIRICAL MODELING OF BACTERIAL CONTAMINATION OF SURFACE WATERS1

ABSTRACT: Bacterial contamination of surface waters is attributed to both urban and agricultural land use practices and is one of the most frequently cited reasons for failure to meet standards established under the Clean Water Act (CWA) (P.L. 92–500). Statewide modeling can be used to determine if bacterial contamination occurs predominantly in urban or agricultural settings. Such information is useful for directing future monitoring and allocating resources for protection and restoration activities. Logistic regression was used to model the likelihood of bacterial contamination using watershed factors for the state of Maryland. Watershed factors included land cover, soils, topography, hydrography, locations of septic systems, and animal feeding operations. Results indicated that bacterial contamination occurred predominantly in urban settings. Likelihood of bacterial contamination was highest for small watersheds with well drained and erodible soils and a high proportion of urban land adjacent to streams. The number of septic systems and animal feeding operations and the amount of agricultural land were not significant explanatory factors. The urban infrastructure tends to “connect” more of the watershed to the stream network through the creation of roads, storm sewers, and wastewater treatment plants. This may partly explain the relationship between urbanization and bacterial contamination found in this study.