Phytoplankton community from Lake Taihu, China, has dissimilar responses to inorganic and organic nutrients

To evaluate the response of phytoplankton from Lake Taihu to di erent types of nutrients, the phytoplankton responses were measured after adding inorganic nitrogen (N) and phosphorus (P) or decomposed algal scum (Microcystis spp.) into the lake water. Both types of nutrients promoted an increase in phytoplankton biomass as determined by chlorophyll a and algal wet weight. The addition of decomposed algal scum resulted in a significantly greater phytoplankton response than the addition of inorganic N and P alone. The dissolved inorganic N and P in the inorganic nutrient treatment were found not limit phytoplankton growth. The higher algal biomass obtained in the treatment with decomposed algal scum indicated the importance of other organic nutrients besides N and P such as trace elements, as well as the importance of the form of N since the levels of ammonia nitrogen (NH4 +-N) from the decomposed algal treatment were actually higher than that of the inorganic N and P addition. Microcystis spp. (Cyanobacteria), Scenedesmus spp. (Chlorophyta) and Synechocystis spp. (Cyanobacteria) were the dominant taxa in the control, inorganic N and P treatment, and the decomposed algal scum treatment, respectively. Microcystis never bloomed in response to both types of nutrient additions indicating that the bloom propagation is not solely related to nutrient additions, but may be related to the absence of selective grazing from zooplankton.     

Sustainability criteria for bioenergy systems: results from an expert survey

Environmental impacts associated with the use of fossil fuels, rising prices, potential limitations in supply and concerns about regional and national security are driving the development and use of biomass for bioenergy, biofuels and bioproducts. However, the use of biomass does not automatically imply that its production, conversion and use are sustainable. In order to operationalize sustainability assessments of biomass systems, it is crucial to identify critical criteria, but keep their number and measurement at a manageable level. The selection of these criteria can vary depending on individual's expertise, geographical region where they work, and spatial scale they are focused on. No clear consensus has yet emerged on what experts consider as critical indicators of sustainability. Objectives of this paper were to analyze how key experts perceive the 35 sustainability criteria for bioenergy found in emerging sustainability assessment frameworks and to identify levels of agreement and uncertainty. Experts were asked to rate the criteria for attributes of relevance, practicality, reliability, and importance.Perceptions of the importance of the 35 criteria varied among the experts surveyed. Only two criteria, energy balance and greenhouse gas balance, were perceived as critical by more than half of the respondents. Social criteria and locally applied criteria were generally ranked low for all four attributes. Seven of the 12 criteria scored as most important focused on environmental issues, four were social and only one was economic. Of the 12 most important criteria, seven were ranked low in practicality and reliability indicating that mechanisms to assess a number of important criteria need to be developed. The spatial scale the experts worked at and their profession explained most of the differences in importance ranking between experts, while regional focus had minimal effect. Criteria that were ranked low for importance, were characterized by a lack of consensus, suggesting the need for further debate regarding their inclusion in sustainability assessments.Outcomes of the survey provide a foundation for further discussions and development of sustainability assessments for bioenergy systems and may also provide a basis for assessing individual bioenergy projects within their specific geographic, ecological, societal, and technological context and scale.     

Histological,chemical, and morphological reexamination of the “heart” of a small Late Cretaceous <Emphasis Type="BoldItalic">Thescelosaurus</Emphasis>

A three-dimensional, iron-cemented structure found in the anterior thoracic cavity of articulated Thescelosaurus skeletal remains was hypothesized to be the fossilized remains of the animal’s four-chambered heart. This was important because the finding could be interpreted to support a hypothesis that non-avian dinosaurs were endothermic. Mammals and birds, the only extant organisms with four-chambered hearts and single aortae, are endotherms. The hypothesis that this Thescelosaurus has a preserved heart was controversial, and therefore, we reexamined it using higher-resolution computed tomography, paleohistological examination, X-ray diffraction analysis, X-ray photoelectron spectroscopy, and scanning electron microscopy. This suite of analyses allows for detailed morphological and chemical examination beyond what was provided in the original work. Neither the more detailed examination of the gross morphology and orientation of the thoracic “heart” nor the microstructural studies supported the hypothesis that the structure was a heart. The more advanced computed tomography showed the same three areas of low density as the earlier studies with no evidence of additional low-density areas as might be expected from examinations of an ex situ ostrich heart. Microstructural examination of a fragment taken from the “heart” was consistent with cemented sand grains, and no chemical signal consistent with a biological origin was detected. However, small patches of cell-like microstructures were preserved in the sandstone matrix of the thoracic structure. A possible biological origin for these microstructures is the focus of ongoing investigation.     

Survival Model for Foot and Leg High Rate Axial Impact Injury Data

Objectives: Understanding how lower extremity injuries from automotive intrusion and underbody blast (UBB) differ is of key importance when determining whether automotive injury criteria can be applied to blast rate scenarios. This article provides a review of existing injury risk analyses and outlines an approach to improve injury prediction for an expanded range of loading rates. This analysis will address issues with existing injury risk functions including inaccuracies due to inertial and potential viscous resistance at higher loading rates.

Methods: This survival analysis attempts to minimize these errors by considering injury location statistics and a predictor variable selection process dependent upon failure mechanisms of bone. Distribution of foot/ankle/leg injuries induced by axial impact loading at rates characteristic of UBB as well as automotive intrusion was studied and calcaneus injuries were found to be the most common injury; thus, footplate force was chosen as the main predictor variable because of its proximity to injury location to prevent inaccuracies associated with inertial differences due to loading rate. A survival analysis was then performed with age, sex, dorsiflexion angle, and mass as covariates. This statistical analysis uses data from previous axial postmortem human surrogate (PMHS) component leg tests to provide perspectives on how proximal boundary conditions and loading rate affect injury probability in the foot/ankle/leg (n = 82).

Results: Tibia force-at-fracture proved to be up to 20% inaccurate in previous analyses because of viscous resistance and inertial effects within the data set used, suggesting that previous injury criteria are accurate only for specific rates of loading and boundary conditions. The statistical model presented in this article predicts 50% probability of injury for a plantar force of 10.2 kN for a 50th percentile male with a neutral ankle position. Force rate was found to be an insignificant covariate because of the limited range of loading rate differences within the data set; however, compensation for inertial effects caused by measuring the force-at-fracture in a location closer to expected injury location improved the model's predictive capabilities for the entire data set.

Conclusions: This study provides better injury prediction capabilities for both automotive and blast rates because of reduced sensitivity to inertial effects and tibia–fibula load sharing. Further, a framework is provided for future injury criteria generation for high rate loading scenarios. This analysis also suggests key improvements to be made to existing anthropomorphic test device (ATD) lower extremities to provide accurate injury prediction for high rate applications such as UBB.     

Implications of Functional Capacity Loss and Fatality for Vehicle Safety Prioritization

Objective: We investigate the use of the Functional Capacity Index (FCI) as a tool for establishing vehicle safety priorities by comparing the life year burden of injuries to the burden of fatality in frontal and side automotive crashes. We demonstrate FCI’s utility by investigating in detail the resulting disabling injuries and their life year costs.

Methods: We selected occupants in the 2000–2013 NASS-CDS database involved in frontal and side crashes, merged their injuries with FCI, and then used the merged data to estimate each occupant’s overall functional loss. Lifetime functional loss was assessed by combining this measure of impairment with the occupants’ expected future life spans, estimated from the Social Security Administration’s Actuarial Life Table.

Results: Frontal crashes produce a large number of disabling injuries, particularly to the lower extremities. In our population, these crashes are estimated to account for approximately 400,000 life years lost to disability in comparison with 500,000 life years lost to fatality. Victims of side crashes experienced a higher rate of fatality but a significantly lower rate of disabling injury (0.3 vs. 1.0%), resulting in approximately 370,000 life years lost to fatality versus 50,000 life years lost to disability.

Conclusions: The burden of disabling injuries to car crash survivors should be considered when setting vehicle safety design priorities. In frontal crashes this burden in life years is similar to the burden attributable to fatality.     

LAND COVER AS A FRAMEWORK FOR ASSESSING RISK OF WATER POLLUTION1

ABSTRACT: A survey of numerous field studies shows that nitrogen and phosphorous export coefficients are significantly different across forest, agriculture, and urban land‐cover types. We used simulations to estimate the land‐cover composition at which there was a significant risk of nutrient loads representative of watersheds without forest cover. The results suggest that at between 20 percent and 30 percent nonforest cover, there is a 10 percent or greater chance of N or P nutrient loads being equivalent to the median values of predominantly agricultural or urban watersheds. The methods apply to environmental management for assessing the risk to increased nonpoint nutrient pollution. Interpretation of the risk measures are discussed relative to their application for a single watershed and across a region comprised of several watersheds.     

Controls of spatial variation in the prevalence of trematode parasites infecting a marine snail

Geographic variability in abundance can be driven by multiple physical and biological factors operating at multiple scales. To understand the determinants of larval trematode prevalence within populations of the marine snail host Littorina littorea, we quantified many physical and biological variables at 28 New England intertidal sites. A hierarchical, mixed-effects model identified the abundance of gulls (the final hosts and dispersive agents of infective trematode stages) and snail size (a proxy for time of exposure) as the primary factors associated with trematode prevalence. The predominant influence of these variables coupled with routinely low infection rates (21 of the 28 populations exhibited prevalence <12%) suggest broad-scale recruitment limitation of trematodes. Although infection rates were spatially variable, formal analyses detected no regional spatial gradients in either trematode prevalence or independent environmental variables. Trematode prevalence appears to be predominantly determined by local site characteristics favoring high gull abundance.     

Estimating nonlinear interaction strengths: an observation-based method for species-rich food webs

Efforts to estimate the strength of species interactions in species-rich, reticulate food webs have been hampered by the multitude of direct and indirect interactions such systems exhibit and have been limited by an assumption that pairwise interactions display linear functional forms. Here we present a new method for directly measuring, on a per capita basis, the nonlinear strength of trophic species interactions within such food webs. This is an observation-based method, requiring three pieces of information: (1) species abundances, (2) predator and prey-specific handling times, and (3) data from predator-specific feeding surveys in which the number of individuals observed feeding on each of the predator's prey species has been tallied. The method offers a straightforward way to assess the completeness of one's sampling effort in accurately estimating interaction strengths through the construction of predator-specific prey accumulation curves. The method should be applicable to a variety of systems in which empirical estimates of direct interaction strengths have thus far remained elusive.     

Dynamics of nitrogen and dissolved organic carbon at the Hubbard brook experimental forest

The factors controlling spatial and temporal patterns in soil solution and streamwater chemistry are highly uncertain in northern hardwood forest ecosystems in the northeastern United States, where concentrations of reactive nitrogen (Nr) in streams have surprisingly declined over recent decades in the face of persistent high rates of atmospheric Nr deposition and aging forests. Reactive nitrogen includes inorganic species (e.g., ammonium [NH4+], nitrate [NO3-]) and some organic forms (e.g., amino acids) available to support the growth of plants and microbes. The objective of this study was to examine controls on the spatial and temporal patterns in the concentrations and fluxes of nitrogen (N) species and dissolved organic carbon (DOC) in a 12-year record of soil solutions and streamwater along an elevational gradient (540-800 m) of a forested watershed at the Hubbard Brook Experimental Forest (HBEF) in the White Mountains of New Hampshire, USA. Dissolved organic N and DOC concentrations were elevated in the high-elevation spruce-fir-white birch (SFB) zone of the watershed, while NO3- was the dominant N species in the lower elevation hardwood portion of the watershed. Within the soil profile, N retention was centered in the mineral horizon, and significant amounts of N were retained between the lower mineral soil and the stream, supporting the idea that near- and in-stream processes are significant sinks for N at the HBEF. Temporal analysis suggested that hydrologic flow paths can override both abiotic and biotic retention mechanisms (i.e., during the non-growing season when most hydrologic export occurs, or during years with high rainfall), there appears to be direct flushing of N from the organic horizons into the stream via horizontal flow. Significant correlations between soil NO3- concentrations, nitrification rates and streamwater NO3- exports show the importance of biological production as a regulator of inorganic N export. The lack of internal production response (e.g., mineralization, nitrification) to a severe ice storm in 1998 reinforces the idea that plant uptake is the dominant regulator of export response to disturbance.     

Degradation of carbon tetrachloride by iron metal: Complexation effects on the oxide surface

Dehalogenation of chlorinated aliphatic contaminants at the surface of zero-valent iron metal (Fe⁰) is mediated by the thin film of iron (hydr)oxides found on Fe⁰ under environmental conditions. To evaluate the role this oxide film plays in the reduction of chlorinated methanes, carbon tetrachloride (CCl₄) degradation by Fe⁰ was studied under the influence of various anions, ligands, and initial CCl₄ concentrations ([P]_o). Over the range of conditions examined in these batch experiments, the reaction kinetics could be characterized by surface-area-normalized rate constants that were pseudo-first order for CCl₄ disappearance (k_CCl4), and zero order for the appearance of dissolved Fe²⁺ (k_Fe²⁺). The rate of dechlorination exhibits saturation kinetics with respect to [P]_o, suggesting that CCl₄ is transformed at a limited number of reactive surface sites. Because oxidation of Fe⁰ by CCl₄ is the major corrosion reaction in these systems, k_Fe²⁺ also approaches a limiting value at high CCl₄ concentrations. The adsorption of borate strongly inhibited reduction of CCl₄, but a concomitant addition of chloride partially offset this effect by destabilizing the film. Redox active ligands (catechol and ascorbate), and those that are not redox active (EDTA and acetate), all decreased k_CCl4 (and k_Fe²⁺). Thus, it appears that the relatively strong complexation of these ligands at the oxide–electrolyte interface blocks the sites where weak interactions with the metal oxide lead to dehalogenation of chlorinated aliphatic compounds.