基于新常态下环境监察执法的难点和重点分析

随着社会经济的发展和人民生活水平的日益提高,广大人民对环境的要求也达到了一个新的高度。在新常态下,如何加强环境监察执法力度与效率、高效解决环境问题、改善生态环境,成为普遍关注的问题。本文从当下环境监察执法工作中的重点与难点出发,分析了新常态下的环境局势,并给出了几点新常态背景下高效开展环境监察执法工作的措施,以期能够改进环境监察执法现状,促进环境问题的早日解决。     

磺酰脲类除草剂的微生物降解研究进展

磺酰脲类除草剂属于高效、低毒、高选择性的新型除草剂,被广泛应用于水稻、玉米、小麦、大豆等田间杂草的防控,其用量也呈逐年增加的趋势,但其微量的除草剂残留易对后茬敏感作物产生药害.利用微生物降解土壤中的除草剂残留有望成为一种修复污染的有效方法.本文综述了近几年国内外筛选出的能够降解磺酰脲类除草剂菌株的来源和所属微生物类群,以及除草剂降解酶的研究进展,此外,对相关微生物对不同除草剂的降解途径也进行了简要介绍,最后提出了目前有待解决的问题并对未来该领域的研究趋势进行了展望,可为后续寻找高效的微生物降解菌种及利用基因工程法修复受污染的土壤、水源提供参考.     

CWPO体系中污泥炭催化降解头孢氨苄废水

通过加入正丁醇以共沸蒸馏法对剩余污泥进行脱水,再对污泥进行干燥、焙烧和改性得到污泥炭催化剂.将污泥炭催化剂用于催化湿式过氧化氢氧化体系,处理头孢氨苄废水.采用响应面法中的中心组合设计实验,考察反应温度、初始pH和过氧化氢投加量对TOC降解率的影响,反应温度和过氧化氢投加量具有显著交互作用.在最佳实验条件下(T=50℃、pH=3.00、H_2O_2=0.071 mol·L~(-1)),TOC去除率为59%,接近预测的TOC去除率(60%),在95%的置信区间内,说明该模型可靠.SEM、TEM、TPD-MS、XPS和FT-IR等分析结果表明污泥炭表面存在纳米尺寸片状结构,这种结构中存在酚羟基、羰基、羧基等活性官能团和醌类结构,且ICP-OES、EDAX和~(57)Fe穆斯堡尔谱等分析结果表明,污泥炭中含有不同价态的Fe,能有效地催化过氧化氢分解,将头孢氨苄转化为苯甲酸、丁二酮等小分子物质,再进一步完全氧化.     

全氟辛烷磺酸盐(PFOS)对半滑舌鳎(Cynoglossus semilaevis)免疫相关基因表达的影响

为了解全氟辛烷磺酸盐(perfluorooctane sulfonate, PFOS)暴露对半滑舌鳎(Cynoglossus semilaevis)免疫功能的影响,在实验室条件下,运用RT-PCR方法分析了PFOS暴露对半滑舌鳎热休克蛋白hsp70、hsp90、C型凝集素(c-type lectin)和细胞色素c氧化酶(cytochrome c oxidase, cox)等4种免疫相关基因表达水平的影响。实验测定了上述4种基因在半滑舌鳎肝、鳃、肠及肌肉4种不同组织中随时间(0、24 h、48 h、96 h和7 d)的表达变化情况。结果表明,在4种组织中,hsp70基因的表达与对照相比为上调,其中,肝组织hsp70基因的表达量显著高于其他各组织,且表达高峰值的出现也早于其他各组织;hsp90基因在肝和鳃组织中表达量随时间不同而波动,在肠组织中表达上调,在肌肉中表达显著下调;c-type lectin基因表达量与对照组相比表达显著下调或无明显差异;cox基因在肝组织和肠组织中表达下调,在鳃和肌肉中表达上调。上述研究结果表明,PFOS能引起免疫相关基因的表达变化,对半滑舌鳎具有潜在的免疫毒性。肝组织中各免疫基因对PFOS胁迫的响应高于其他组织。本研究可为阐明全氟辛烷磺酸盐对半滑舌鳎的免疫毒性提供基础数据。     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

气田甲醇污水处理装置的运行优化

针对延长气田采气一厂甲醇污水处理站运行中换热器/精馏塔塔板结垢严重、甲醇回收率低、处理后水水质不达标等问题,采用水质分析、结垢分析与工艺原因分析等方法,分析原因并采取相应措施。结果表明:预处理效果差、精馏塔分离效果差是造成这些问题的主要原因;采用优化预处理药剂加量、优化加药工艺和优化甲醇回收工艺等措施,使甲醇污水处理装置持续稳定运行,提高了甲醇污水预处理效果,降低了换热器/精馏塔塔板结垢程度,提高了甲醇回收率。处理后水水质稳定,含油量、悬浮固体含量、悬浮物粒径中值均达标,可满足平均空气渗透率≤0.01μm~2地层的回注要求。     

考虑黏结性退化的锈蚀PC梁抗弯承载力计算方法∗

钢绞线锈蚀降低了其与混凝土间的黏结性,导致钢绞线与其周围混凝土间的变形不协调,影响预应力混凝土梁的抗弯性能。采用快速锈蚀试验得到了不同锈蚀程度的16个有箍筋和无箍筋拉拔试件,通过拉拔试验得到了试件开始滑移及破坏时的拉拔力;回归了黏结折减系数与锈蚀率之间的关系式,并将其融入到预应力混凝土梁的抗弯承载力分析模型中,提出了考虑黏结性退化的锈蚀预应力混凝土梁抗弯承载力计算方法。试验结果表明：有箍筋试件的黏结强度大于无箍筋试件;随着钢绞线锈蚀水平的增大,箍筋对黏结强度退化的约束作用逐渐减小;黏结折减系数随锈蚀率的增加呈指数函数规律递减。将理论值与本文及已有文献中锈蚀预应力混凝土梁抗弯性能试验结果进行了比较,计算结果表明本方法预测精度较高,最大误差在6%以内,验证了本抗弯承载力计算方法的适用性,可为服役预应力混凝土桥梁抗弯承载力评估提供参考。     

电厂屏式过热器弯头开裂原因失效分析

通过外观检查、硬度、金相等检测方法,从金属管壁超温运行、蒸汽侧氧化行为、析出相及冷弯变形对组织性能影响等方面分析了某电厂1 000 MW超超临界机组屏式过热器弯头开裂原因,得出TP347HFG弯头开裂的主要原因是弯头组织富含较多的σ相、NbC等硬脆析出相,同时冷弯加工导致管子内部产生残余应力,加剧了弯头脆性开裂的倾向。