An Integrated Assessment of Climate Change and the Accelerated Introduction of Advanced Energy Technologies - An Application of MiniCAM 1.0

We report results from the application of an integrated assessment model, MiniCAM 1.0. The model is employed to explore the full range of climate change implications of the successful development of cost effective, advanced, energy technologies. These technologies are shown to have a profound effect on the future magnitude and rate of anthropogenic climate change. We find that the introduction of assumptions developed by a group of ‘bottom-up’ modelers for the LEESS scenarios into a ‘top-down’ model, the Edmonds-Reilly-Barns Model, leads to ‘top down’ emissions trajectories similar to those of the LEESS. The cumulative effect of advanced energy technologies is to reduce annual emissions from fossil fuel use to levels which stabilize atmospheric concentrations below 550 ppmv. While all energy technologies play roles, the introduction of advanced biomass energy production technology is particularly important. The consideration of all greenhouse related anthropogenic emissions, and in particular sulfur dioxide, is found to be important. We find that the consideration of sulfur dioxide emissions coupled to rapid reductions in carbon dioxide emissions leads to higher global mean temperatures prior to 2050 than in the reference case. This result is due to the short-term cooling impact of sulfate aerosols, which dominates the long-term warming impact of CO₂ and CH₄ in the years prior to 2050. We also show that damage calculations which use only mean global temperature and income may be underestimating damages by up to a factor of five. Disaggregating income reduces this to a factor of two, still a major error. Finally, the role of the discount rate is shown to be extraordinarily important to technology preference.     

Ban on landfilling of wooden pallets in North Carolina: an assessment of recycling and industry capacity

Pallets literally move the world and an estimated 2 billion of them are in use in the U.S. every day. However, pallets have a short life span and thus consume vast quantities of resources. They are also responsible for 2–3% of all waste landfilled in the United States. This is despite the fact that technologies and markets exist that allow pallets to be reused, recycled, converted into other products or turned into mulch, boiler fuels or alcohols (ethanol). The State of North Carolina's legislature debated a ban on landfilling pallets for several years and has now enacted legislation to ban this practice beginning in 2009. This study provided information used to help reach that decision.North Carolina had 103 known pallet recycling operations that were surveyed in 2003–2004. Using 34 responses, the total pallet recycling capacity in North Carolina was close to 60 million units per year, while 34 million pallets were actually recycled in 2003. The average operation employed nearly 34 persons and recycled about 326,000 pallets per year. On average, 20% of the pallets received by a recycling operation were reused, 45% were refurbished, 19% were recycled, and 15% were ground. The industry generally thought that a ban on landfilling pallets was a good idea (56%) with 18% indicating it was a bad idea. Another 18% of respondents did not care and 9% had different ideas.     

Remediation process optimization: A status report

There are hundreds of contaminated sites with remediation systems that require evaluation and modification to accomplish cleanup goals. These systems are operating well past projected cleanup schedules, cost more than projected to operate, and may not be as protective of human health and the environment as planned. Remediation process optimization (RPO) is an effective method to assess the progress of a system toward achieving cleanup goals within desired time frames and to make the necessary changes in order to reach those goals. Eight main components to the RPO process are evaluated during a review and an implementation plan of recommended changes to the system is developed. Follow‐up and tracking are essential to successful RPO programs. In this article, the authors present a summary of a recent Technical and Regulatory (TechReg) Guidance Document (Interstate Technology and Regulatory Council [ITRC], 2004) and related Technology Overview Series on Advanced Topics in RPO (ITRC, 2006) in a distilled form. © 2007 Wiley Periodicals, Inc.     

Effects of heavy metals and nitroaromatic compounds on horseradish glutathione S-transferase and peroxidase

Glutathione S-transferase (GST) and peroxidase (POX) activities have a direct relation to the effect of stress on plant metabolism. Changes in the activities of the enzymes were therefore studied. Horseradish hairy roots were treated by selected bivalent ions of heavy metals (HMs) and nitroaromatic compounds (NACs). We have shown differences in GST activity when assayed with substrates 1-chloro-2,4-dinitrobenzene (CDNB) and 1,2-dichloro-4-nitrobenzene (DCNB). The conjugation of DCNB catalysed by GST was inhibited in all roots treated with HMs as compared to non-treated roots, whereas NACs caused induction of the activity in dependence on the exposition time and concentration of compounds. The conjugation of CDNB by GST was not affected to the same extent. The increase of GST activity was determined in cultures treated by nickel (0.1 mM) and diaminonitrotoluenes (DANTs, 0.1 mM) for 6 h, whereas the roots treated by 2,4,6-trinitrotoluene (TNT), 4-amino-2,6-dinitrotoluene (ADNT) and dinitrotoluene (DNT, 1.0 mM) needed 27 h treatment to induce the activity. The POX activity of cultures treated by HMs was inhibited to 17-35% in comparison to non-treated cultures. The POX activity of roots treated by TNT (0.1 and 1.0 mM) for 6 and 27 h and by ADNT (0.1 and 1.0 mM) for 6 h was inhibited. A partial increase of POX activity was measured in roots treated by all NACs for 27 h. The content of oxidized glutathione (GSSG) and reduced glutathione (GSH) in the roots differed significantly. It was followed as a symptom of the stress reaction of the plant metabolism to the effect of NACs and HMs.     

Variation, levels and profiles of organochlorines and brominated flame retardants in great tit (Parus major) eggs from different types of sampling locations in Flanders (Belgium)

Small-scale geographical variation in the occurrence of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) was investigated using the eggs of a terrestrial residential songbird species, the great tit (Parus major). In addition, we investigated the influence of the type of sampling location on the presence of these pollutants. To achieve this, 10 different sampling locations in Flanders (Belgium) were classified into 3 groups based on the extent of urbanisation, industrialisation and agriculture. The higher variance among sampling locations for the levels and profiles of PCBs and OCPs, suggests that local contamination sources are more important for the PCBs and OCPs compared to the PBDEs. Levels of PCBs and PBDEs were significantly higher in the industrialised sampling locations compared to the other locations. Sum PCB and sum PBDE levels reached up to 6050 and 79 ng/g lipid weight, respectively. PCBs and PBDEs were highly positively correlated for all groups, suggesting similar exposure pathways and/or mechanisms of accumulation. Significantly higher levels of OCPs (sum OCPs up to 2683 ng/g lipid weight) were detected in the rural sampling locations situated in a residential area. This suggests that local historical usage of OCPs by inhabitants may be an important source of contamination in Flanders. Contamination profiles differed also among the sampling locations. The rural sampling locations had a higher contribution of lower brominated BDE congeners, whereas the industrialised locations had a higher contribution of higher brominated congeners. The differences in contamination profiles among the sampling locations are probably due to differences in exposure. In conclusion, our results showed that the characteristics of a sampling location influence both the levels and profiles of PCBs, OCPs and PBDEs.     

Transport and metabolic fate of sewage particles in a recipient stream

Although the implementation of wastewater treatment plants (WWTP) has dramatically increased the quality of surface waters in urbanized areas, WWTPs can still discharge noticeable amounts of solutes and particles to recipient streams. Although the fate of WWTP nutrients has received considerable attention, transport and in-stream transformation of sewage-derived particulate organic matter (SDPOM) have not. To investigate the transport and transformation of SDPOM in recipient streams, we experimentally injected fluorescently labeled SDPOM into a headwater stream and tracked its downstream fate at baseflow. Most SDPOM disappeared from the streamwater within a 160-m long reach with an average deposition velocity of 0.14 mm s(-1). We further coupled hydrometric measurements of specific water fluxes through the streambed interface with a mixing model to estimate streambed oxygen removal, and found significantly higher oxygen removal in the deposition (0.75 g O2 m(-2) d(-1)) than in the downstream post-deposition (0.36 g O2 m(-2) d(-1)) subreach. Contrary to our expectations, we did not detect any apparent effect of SDPOM deposition on streambed clogging. Our results show the capacity of a recipient stream to retain SDPOM and to reduce its downstream export, and thus contribute to a better understanding of ecosystem services of human-altered streams.     

Do earthworms impact metal mobility and availability in soil? - A review

The importance of earthworms to ecosystem functioning has led to many studies on the impacts of metals on earthworms. Far less attention has been paid to the impact that earthworms have on soil metals both in terms of metal mobility and availability. In this review we consider which earthworms have been used in such studies, which soil components have been investigated, which types of soil have been used and what measures of mobility and availability applied. We proceed to review proposed reasons for effects: changes in microbial populations, pH, dissolved organic carbon and metal speciation. The balance of evidence suggests that earthworms increase metal mobility and availability but more studies are required to determine the precise mechanism for this.     

Characterisation of particulate exposure during fireworks displays

Little is known about the level and content of exposure to fine particles (PM_2.5) among persons who attend fireworks displays and those who live nearby. An evaluation of the levels of PM_2.5 and their elemental content was carried out during the nine launches of the 2007 Montréal International Fireworks Competition. For each event, a prediction of the location of the firework plume was obtained from the Canadian Meteorological Centre (CMC) of the Meteorological Service of Canada. PM_2.5 was measured continuously with a photometer (Sidepak?, TSI) within the predicted plume location (“predicted sites”), and integrated samples were collected using portable personal samplers. An additional sampler was located on a nearby roof (“fixed site”). The elemental composition of the collected PM_2.5 samples from the “predicted sites” was determined using both a non-destructive energy dispersive ED-XRF method and an ICP-MS method with a near-total microwave-assisted acid digestion. The elemental composition of the “fixed site” samples was determined by the ICP-MS with the near-total digestion method. The highest PM_2.5 levels reached nearly 10 000 μg m^?3, roughly 1000 times background levels. Elements such as K, Cl, Al, Mg and Ti were markedly higher in plume-exposed filters. This study shows that 1) persons in the plume and in close proximity to the launch site may be exposed to extremely high levels of PM_2.5 for the duration of the display and, 2) that the plume contains specific elements for which little is known of their acute cardio-respiratory toxicity.     

Assessing seasonal and spatial trends of persistent organic pollutants (POPs) in Indian agricultural regions using PUF disk passive air samplers

The first survey of persistent organic pollutant (POP) concentrations in air across several Indian agricultural regions was conducted in 2006-2007. Passive samplers comprising polyurethane foam (PUF) disks were deployed on a quarterly basis at seven stations in agricultural regions, one urban site and one background site. The project was conducted as a sub-project of the Global Atmospheric Passive Sampling (GAPS) Network. In addition to revealing new information on air concentrations of several organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs), the study has demonstrated the feasibility of conducting regional-scale monitoring for POPs in India using PUF disk samplers. The following analytes were detected with relatively high concentrations in air (mean for 2006 and 2007, pg/m³): α- and γ-hexachlorocyclohexane (HCH) (292 and 812, respectively); endosulfan I and II (2770 and 902, respectively); p,p′-DDE and p,p′-DDT (247 and 931, respectively); and for the sum of 48 PCBs, 12,100 (including a site with extremely high air concentrations in 2007) and 972 (when excluding data for this site).     

Using Land-use Planning to Manage Transport Demand: A survey of Scottish experience

Recent concerns surrounding the growth of mobility and associated increases in journey length and number of motorised journeys for an increasingly diverse pattern of trips have placed demands on the planning system in terms of the need to consider the land use-transport interaction. This paper first provides a review of relevant national planning policy in Scotland in particular. It then goes on to report findings from a recent survey which highlights the attitudes held by Scottish planning professionals to managing transport demand through land-use planning. The paper outlines the trade-offs encountered in practice between competing policy objectives. In Scotland there is no planning guidance equivalent to Planning Policy Guidance Note 13, which applies to England and Wales, around which there has been much debate on its impact on development control decisions and planning strategy. Draft guidance for Scotland was produced in 1996 for consultation and again in 1998, but at the time of writing has yet to be finalised. The findings from this study are timely in that they enable an assessment of the extent to which the planning system is being used to manage transport demand. Recent local government reorganisation in Scotland has resulted in significant changes to ways in which strategic planning and development control policy are likely to proceed. The paper focuses on the extent to which local authority policy emphasises the need to reduce travel through planning.