上海市饮用水源地优先控制有机污染物筛选

综合考虑国外优先控制污染物筛选的方法,根据上海市集中式生活饮用水源地特定80项和地表水控制的109项以外项目、全市挥发性和半挥发性有机项目、水源地突发性应急事故有机污染物等实际监测数据和历年来微量有机污染物研究成果,制定饮用水源地优先控制有机污染物筛选的原则、程序和过程,对出现频率高、超标几率高、浓度高,可能对人体健康产生影响的有机污染物进行筛选,提出包括多环芳烃、酞酸酯、卤代烃和其他共4类7种上海市饮用水源地优先控制有机污染物名单.     

石化行业给排水系统设计图纸环境监理审查要点

石化行业废水种类多样、毒性较大,给排水系统的设计会直接影响石化项目建成后周边地表及地下水环境质量。设计文件的环保审查是环境监理的重要依据之一,其中,相关的设计图纸对下一步建设工作具有指导作用,是所有施工单位的施工依据。以某石化行业为例,对给排水系统设计文件的收集进行了分析,并根据设计图纸环保审查中存在的问题,对环境监理如何提高在设计会审中的作用,设计阶段如何对设计图纸进行审查以及审查的重点内容等进行了阐述。     

石家庄市冬季大气中VOCs污染特征分析

为弄清石家庄市冬季大气中VOCs的污染特征,采用美国环保局TO-15方法对石家庄市冬季大气中VOCs组成进行了定性和定量分析。在此基础上,进行了VOCs的月度变化分析、春节期间的变化分析,并进行了VOCs与空气质量指数AQI、PM2.5等之间的相关性分析;根据VOCs组成及变化情况和相关性,分析了其可能的来源。结果表明,石家庄市冬季大气中VOCs的质量浓度为145.7~1 410.7μg/m3,VOCs组分主要有丙酮、二氯甲烷、苯、乙酸乙酯、甲苯、1,2-二氯丙烷、三氯甲烷。春节期间,大气中VOCs的浓度有大幅的下降,比日常均值下降了40.9%。AQI较高时,大气中VOCs浓度有所升高。石家庄市冬季大气中丙酮、二氯甲烷、乙酸乙酯等主要来源于医药化工生产活动,苯、甲苯主要来源于煤燃烧。     

进口与国产COD消解测定仪测定废水COD的比对研究

应用消解分光光度法,比对了一款进口仪器和一款国产仪器应用于实际水样中COD含量测定的差异性。通过精密度、回收率、方法比对等实验分析得出,2款仪器应用电热消解分光光度法测定COD,实验结果与国标回流滴定法的实验结果基本一致,无显著性差异,具有可比性,可广泛用于水质评价和环境监测。与国产仪器相比,进口测定仪具有较小的偏差,较高的回收率。国产测定仪偏差较大的原因主要在于其比色装置,而不是用于前处理的消解装置。比较分析了2款仪器的购买和使用经济成本,为广大企事业及科研单位选用COD消解测定仪提供了有价值的基础数据和参考建议。     

北京市地下水污染源荷载影响评价

在阐述地下水污染源荷载影响基本概念的基础上,介绍了污染源荷载影响评价的3大要素:污染荷载等级、含水层敏感性及地下水价值,说明了评价体系、指标和方法及过程。根据主要污染源荷载分析,结合地下水环境现状,对北京市进行了分区,提出污染源管理措施。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

Annual Nutritional Organ Mass Cycle of <Emphasis Type="Italic">Bufo gargarizans</Emphasis> (Cantor, 1842) in Response to Extreme High Temperature

The annual relative mass of storage organs cycle of Bufo gargarizans in southwestern China was studied from December 2005 to November 2006. We described how those organs changed in response to extreme temperatures. Energy reservation dropped to the lowest levels after dormancy for both sexes, and then increased for period of 4.25 month. However, the mass of these organs dropped again rapidly until August (liver) and September (fat bodies) due to the constraint from extreme high temperature occurred during the summer, and then non-significantly increased before hibernation. For ovaries, varied with a different profile to those of liver and fat bodies have a resting period of four months. In addition, the toads’ ovaries kept growing when the mass of liver and fat bodies declining accordingly during hibernation. Therefore, ovarian mass increased during the hibernation and non-hibernation period.     

生物难降解有机污染物的治理对策

针对废水中难降解化学合成有机污染物的种类和数量不断增加，生物处理出水达标困难的现状，总结了国内外的经验和研究成果，对现有处理装置改造提出了若干建议，并介绍了几种国外废水处理新技术。     

企业环境管理制度优化及其信息系统框架设计研究

污染源大数据是环保大数据的重要组成部分,然而在以环境管理制度为基础的污染源数据管理过程中,一直存在制度衔接不流畅、数据不共享等诸多问题。本文调研考察了现有各项环境管理制度的衔接情况,提出以排污许可制度为核心,通过与其他环境管理制度有效衔接,实现环境管理的各个环节的有效覆盖。通过SWOT分析法对基于"一证式"改革的环境管理制度优化方案的可行性和必要性进行了深入分析,并以排污许可证为核心,设计企业环境管理信息系统框架。试生产与竣工环保验收实效不足,可转为企业自行备案;将环评审批结论纳入排污许可证,可大幅度减轻企业相关环境管理业务人员的负担。环境管理制度的优化必须建立在部门职能转变与整合之上;同时,还必须获得国家层面的立法与行政的支持;社会舆论的关注与支持也将推动环境管理制度优化的进程。以排污许可证管理为核心的信息系统框架可以有效实现污染源排放信息整合共享。     

全球升温1.5℃与2.0℃情景下长江中下游地区极端降水的变化特征

基于长江中下游地区1961~2100年区域气候模式COSMO-CLM(CCLM)模拟与1961~2005年气象站观测的逐日降水数据,通过统计计算年降水量、强降水量、暴雨日数和极端降水贡献率4个极端降水指数,研究全球升温1.5℃与2.0℃情景下,长江中下游地区极端降水的时空变化特征。结果表明:(1)全球升温1.5℃情景下,年降水量相对于1986~2005年减少5%,强降水量、暴雨日数和极端降水贡献率分别增加7%、33%和4%;概率密度曲线表明,年降水量均值下降,强降水量、暴雨日数和极端降水贡献率均值上升,极端降水方差增大;年降水量、强降水量和暴雨日数在空间上表现为南部增加北部减少,极端降水贡献率则相反。(2)全球升温2.0℃情景下,年降水量下降3%,强降水量、暴雨日数和极端降水贡献率分别上升15%、46%和15%;年降水量均值稍有减少且方差稍有上升,强降水量、暴雨日数和极端降水贡献率均值和方差明显增加;年降水量减少区域位于长江主干以北,强降水量、暴雨日数和极端降水贡献率表现为绝大部分地区增加的空间变化特征。(3)全球升温由1.5℃至2.0℃时,年降水量、强降水量、暴雨日数和极端降水贡献率分别增加3%、7%、10%和11%;随升温幅度的增加极端降水均值和方差上升;极端降水呈增加态势的范围扩大。因此,努力将升温控制在1.5℃对降低极端降水的影响具有重要意义。