Does industrial waste taxation contribute to reduction of landfilled waste? Dynamic panel analysis considering industrial waste category in Japan

Waste taxes, such as landfill and incineration taxes, have emerged as a popular option in developed countries to promote the 3Rs (reduce, reuse, and recycle). However, few studies have examined the effectiveness of waste taxes. In addition, quite a few studies have considered both dynamic relationships among dependent variables and unobserved individual heterogeneity among the jurisdictions. If dependent variables are persistent, omitted variables cause a bias, or common characteristics exist across the jurisdictions that have introduced waste taxes, the standard fixed effects model may lead to biased estimation results and misunderstood causal relationships. In addition, most existing studies have examined waste in terms of total amounts rather than by categories. Even if significant reductions in total waste amounts are not observed, some reduction within each category may, nevertheless, become evident.Therefore, this study analyzes the effects of industrial waste taxation on quantities of waste in landfill in Japan by applying the bias-corrected least-squares dummy variable (LSDVC) estimators; the general method of moments (difference GMM); and the system GMM. In addition, the study investigates effect differences attributable to industrial waste categories and taxation types. This paper shows that industrial waste taxes in Japan have minimal, significant effects on the reduction of final disposal amounts thus far, considering dynamic relationships and waste categories.     

Distribution and temporal changes of lead in the surface seawater in the western Pacific and adjacent seas derived from coral skeletons

We determined Pb contents together with Pb isotopic compositions in coral skeletons (Porites spp.) collected from the western Pacific and adjacent seas to examine distribution of Pb in sea surfaces. Temporal records of Pb were also investigated using coral skeletons from Hainan and Ogasawara Island, located in China and Japan, respectively. The spatial distribution of Pb showed a clear dilution pattern of Pb from Asian continent to the open ocean. Also the similar trend was found in the Java Sea from Jakarta to the offshore. In addition to the spatial distribution, Pb contents in Ogasawara coral have gradually increased during last 108 years. It may be attributed to Pb emission mainly from industrial activities in Asian countries. Hainan coral, which provided 10 years record of Pb, showed a remarkable decline around 1997 probably due to the partial introduction of unleaded gasoline in China.     

Determination of PCDD/Fs and dioxin-like PCBs in fish oils for feed ingredients by congener-specific chemical analysis and CALUX bioassay

The present research was intended to determine the suitability of the CALUX assay as a screening method for dioxins in fish oil used as a feed ingredient in Japan. Alteration of TEQ in fish oil according to newly proposed toxic equivalency factors (TEF) is also discussed. In the analysis, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in 41 fish oil samples were determined by using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS) and CALUX bioassay. The mean TEQ values derived from 1998 WHO-TEF of PCDD/Fs and DL-PCBs were 2.6 and 9.9 pg g(-1) (ww), respectively. The levels of TEQ derived from the recently re-evaluated 2005 WHO-TEF were slightly lower than those of the former in both groups. Notably, the contribution of mono-ortho DL-PCBs to total 2005 WHO-TEQ was considerably decreased compared to the case of 1998 WHO-TEQ, resulting from the reduction in its TEF values, while the non-ortho DL-PCBs contribution was increased. The mean TEQ determined by CALUX assay for PCDD/Fs was approximately three times higher, whereas DL-PCBs was approximately two times lower than WHO-TEQ determined by HRGC/HRMS; the sum of PCDD/Fs and DL-PCBs was very similar by both methods. The correlation coefficients of TEQ between the CALUX assay and HRGC/HRMS analysis were 0.84, 0.89, and 0.90 for PCDD/Fs, DL-PCBs, and the sum, respectively. These results suggest that the CALUX assay is a very useful method for the screening of dioxin-related compounds in fish oils.     

Effect of heating rate on the pyrolysis of high-impact polystyrene containing brominated flame retardants: fate of brominated flame retardants

In the case of plastics containing brominated flame retardants, various brominated organic compounds, including polybrominated dibenzodioxins and dibenzofurans, are yielded when they are degraded. In order to reduce the hazard that might be generated during after-live treatment, the behaviour of flame retarded high-impact polystyrene containing decabromo diphenylether and antimony oxide (Sb₂O₃), was investigated using several heating programs. It was found that the separation of the thermal process into two steps divided at 330?°C makes it possible to obtain an oil fraction rich in brominated compounds at low temperatures and an oil fraction depleted in brominated compounds at high temperatures. The low temperature oil contained a high concentration of SbBr₃ and dibromodibenzofurans. Various brominated compounds with a low volatility and 1-bromo-1-phenylethane from the reaction of HBr with styrene were among the substances in the high temperature oil. The concentration of brominated compounds was reduced from 6?wt% for degradation in a single step to below 1?wt% in the high temperature oil in the two step process.     

Levels and profiles of long-chain perfluorinated carboxylic acids in human breast milk and infant formulas in East Asia

In this study, 90 human breast milk samples collected from Japan, Korea, and China were analyzed for perfluorooctanoic acid (PFOA) (C8), perfluorononanoic acid (PFNA) (C9), perfluorodecanoic acid (PFDA) (C10), perfluoroundecanoic acid (PFUnDA) (C11), perfluorododecanoic acid (PFDoDA) (C12), and perfluorotridecanoic acid (PFTrDA) (C13). In addition, infant formulas (n = 9) obtained from retail stores in China and Japan were analyzed. PFOA was the predominant compound and was detected in more than 60% of samples in all three countries. The PFOA, PFNA, PFDA, and PFUnDA levels in Japan were significantly higher than those in Korea and China (p < 0.05). The PFTrDA level was highest in Korea (p < 0.05). The median PFOA concentrations were 89 pg mL⁻¹ (48% of total perfluorinated carboxylic acids (PFCAs) (C8-C13)) in Japan, 62 pg mL⁻¹ (54%) in Korea, and 51 pg mL⁻¹ (61%) in China. The remaining ∑PFCAs (C9-C13) were 95 pg mL⁻¹ in Japan, 52 pg mL⁻¹ in Korea, and 33 pg mL⁻¹ in China. Among the long-chain PFCAs, odd-numbered PFCAs were more frequently detected than even-numbered PFCAs, except for PFDA in Japan. There were no evident correlations between the mother’s demographic factors and the PFCA concentrations. PFOA, PFNA, and PFDA were frequently detected in both Japan and China, but there were no significant differences between the two countries. The total PFCA concentrations in the infant formulas were lower than those in the breast milk samples in Japan (p < 0.05), but not in China (p > 0.05). In conclusion, various PFCAs were detected in human breast milk samples from East Asian countries.     

Emissions of particulate matter and associated polycyclic aromatic hydrocarbons from agricultural diesel engine fueled with degummed, deacidified mixed crude palm oil blends

Mixed crude palm oil(MCPO),the mixture of palm fiber oil and palm kernel oil,has become of great interest as a renewable energy source.It can be easily extracted from whole dried palm fruits.In the present work,the degummed,deacidified MCPO was blended in petroleum diesel at portions of 30% and 40% by volume and then tested in agricultural diesel engines for long term usage.The particulates from the exhaust of the engines were collected every 500 hr using a four-stage cascade air sampler.The 50% cut-off aerodynamic diameters for the first three stages were 10,2.5 and 1μm,while the last stage collected all particles smaller than 1μm.Sixteen particle bounded polycyclic aromatic hydrocarbons(PAHs) were analyzed using a high performance liquid chromatography.The results indicated that the size distribution of particulate matter was in the accumulation mode and the pattern of total PAHs associated with fine-particles(< 1μm) showed a dominance of larger molecular weight PAHs(4-6 aromatic rings),especially pyrene.The mass median diameter,PM and total PAH concentrations decreased when increasing the palm oil content,but increased when the running hours of the engine were increased.In addition,Commercial petroleum diesel(PB0) gave the highest value of carcinogenic potency equivalent(BaP eq) for all particle size ranges.As the palm oil was increased,the BaP eq decreased gradually.Therefore the degummed-deacidified MCPO blends are recommended for diesel substitute.     

A novel extractant for removal of hazardous metals from preservative-treated wood waste

The purpose of this study was to develop a one-step metal extraction process that would effectively remove hazardous elements from wood powder or chips of western hemlock [Tsuga heterophylla (Raf.) Sarg.] treated with chromated copper arsenate (CCA) preservative. In addition, we tested this method for wood treated with other copper-based preservatives such as ammoniacal copper quaternary (ACQ) and copper, boron, and azole (CuAz). A bioxalate solution consisting of 0.125 M oxalic acid adjusted to pH 3.2 with sodium hydroxide was tested for its ability to extract chromium, copper, and arsenic from wood treated with CCA and copper from ACQ, CuAz, or a mixture of CCA-, ACQ-, and CuAz-treated wood in single step. The extraction proceeded efficiently with 6 h of treatment, and was insensitive to the differences in chemical characteristics, including solubility of individual elements. After 6 h of treatment, approximately 90% of chromium, copper, and arsenic were effectively removed from wood treated with CCA or a mixture of CCA, ACQ, and CuAz and 90% of copper from ACQ- and CuAz-treated wood. These results demonstrate that the solvent extraction technique using pH-adjusted bioxalate solution with sodium hydroxide is a promising method for pollution minimization by various types of wastes contaminated with heavy metals and arsenic.     

Feedstock recycling of waste polymeric material

The first International Symposium on Feedstock Recycling of Polymeric Materials (ISFR) was hosted in 1999 in Sendai, Japan. Since then, the ISFR has been held five times in different places in Asia and Europe. Each of these conferences focused on special issues covered by the Journal of Material Cycles and Waste Management. The topics included thermal processes with and without catalysts, wet processes in various solvents, the dehydrochlorination of PVC, mechanical recycling and separation techniques, as well as the treatment of biomaterials. This review is a compilation of the most interesting and important developments discussed at the ISFR during the last decade.     

An estimation of the social costs of landfill siting using a choice experiment

This paper examines public preferences on siting landfills using a choice experiment. A choice experiment is a method that elicits public preferences directly through questionnaires. This paper focuses on possible negative effects of a hypothetical landfill siting on residents who are assumed to live around the landfill. The results of this analysis clearly show that the residents evaluate accepting waste originating from outside their community quite negatively, especially industrial waste originating from the Tokyo Metropolitan Area. Large external costs also are seen for siting landfills near areas that are sources of drinking water. In addition, the results show that the NIMBY syndrome of the residents weakens as the hypothetical landfill site is farther away. Considering three hypothetical siting plans, external costs based on public preferences are estimated. The social costs, which are the sum of the private costs and external costs, are then calculated. The results of the case study indicate that the option with the lowest private cost it is not always the option with the lowest social cost.