Detection of Asian dust aerosols using meteorological satellite data and suspended particulate matter concentrations

The advection and dispersion of Asian dust events from China to the Pacific Ocean around Japan during 2000–2002 were investigated using the meteorological satellite data of NOAA/AVHRR and GMS-5/VISSR. Aerosol vapour index images, taking the brightness temperature difference between 11 and 12 μm, are very effective for monitoring the Asian dust phenomenon in the East Asia region, with their capacity for detection during the day or night. We discuss the dust events, focusing on the advection patterns shown in satellite images, which are classified into three types as ‘dry slot’, ‘high-pressure wedge’ and ‘travelling high’, based on synoptic patterns. The results are compared with suspended particulate matter concentrations measured at Japanese surface stations and with ground-based observations of Sakurajima volcano by a web camera system at Kagoshima in Kyushu, Japan. We found that the passage of cold fronts caused a rapid increase of suspended particulate matter (SPM) concentrations, which exceeded 100 μg m⁻³, and that deep low-pressure complexes strengthened the dust phenomenon. The ‘high-pressure wedge’ type is seen much more clearly in satellite images than the ‘travelling high’ type, but SPM concentrations and visibility were similar in both owing to the differences in the vertical distribution of the dust and in viewing conditions.     

Comprehensive Study on Enteric Viruses and Indicators in Surface Water in Kyoto,Japan, During 2014–2015 Season

Certain enteric viruses that are present in the water environment are potential risk factors of waterborne infections. To better understand the impact of viruses in water, both enteric viruses and their potential indicators should be comparatively investigated. In this study, occurrences of GI- and GII-noroviruses (NoVs), sapovirus (SaV), rotavirus (RoV), Aichi virus 1 (AiV-1), enterovirus (EV), and pepper mild mottle virus (PMMoV) were quantitatively determined in surface water samples in Japan. Additionally, the genotype distribution of GI- and GII-NoVs was determined using a next-generation amplicon sequencing. PMMoV was the most abundant virus regardless of season and location, indicating its usefulness as an indicator for the viral contamination of water. Other potential indicators, AiV and EV, were less abundant than GII-NoV. Viruses other than PMMoV showed seasonality, i.e., EV and other viruses (NoVs, SaV, RoV, and AiV-1) became prevalent during summer and winter, respectively. SaV showed a relatively high abundance at a location that was affected by untreated wastewater. Regarding NoV genotypes, GI.1, GI.2, GI.4, GI.5, GI.6, GII.3, GII.4, GII.6, and GII.17 were found from the surface water samples. GII.4 and GII.17 seemed to have contributed to the high abundance of GII-NoV in the samples. Interestingly, GII.17 strains became prevalent in the water samples before becoming prevalent among gastroenteritis patients in Japan. These findings provide further insights into the properties of viruses as contaminants in the water environment.     

Characterization of Activated Carbon Fiber Filters for Pressure Drop,Submicrometer Particulate Collection,and Mercury Capture

ABSTRACT

The use of activated carbon fiber (ACF) filters for the capture of particulate matter and elemental Hg is demonstrated. The pressure drop and particle collection efficiency characteristics of the ACF filters were established at two different face velocities and for two different aerosols: spherical NaCl and combustion-generated silica particles. The clean ACF filter specific resistance was 153 kg m^-2 sec^-1. The experimental specific resistance for cake filtration was 1.6 × 10⁶ sec^-1 and 2.4 × 10⁵ sec^-1 for 0.5- and 1.5-μm mass median diameter particles, respectively. The resistance factor R was approximately 2, similar to that for the high-efficiency particulate air filters. There was a discrepancy in the measured particle collection efficiencies and those predicted by theory. The use of the ACF filter for elemental Hg capture was illustrated, and the breakthrough characteristic was established. The capacity of the ACF filter for Hg capture was similar to other powdered activated carbons.     

Comparative survey of levels of chlorinated cyclodiene pesticides in breast milk from some cities of China, Korea and Japan

Exposure of mothers to organochlorine pesticides (OCPs) was assessed by measuring the levels of 20 OCPs in 70 human breast milk samples pooled from 210 individuals from China, Korea and Japan. The OCPs were analyzed using gas chromatography/mass spectrometry (GC/MS) in electron capture negative ionization (ECNI) monitoring. The results showed that β-hexachlorocyclohexane and hexachlorobenzene were one order of magnitude higher in China than in the other nations, whereas chlordanes and polychlorinated biphenyl levels were highest in Japan. Heptachlor epoxide, dieldrin, endrin, toxaphenes and mirex were detected in most samples, and levels of these chemicals were significantly higher in Japan (0.8-4.5 ng g⁻¹ lipid), followed by Korea (0.2-4.7 ng g⁻¹ lipid), and lowest in China (less than 1.0 ng g⁻¹ lipid). α- and β-endosulfans were detected at a range of 0.9-1.5 ng g⁻¹ lipid levels in all samples analyzed, and their levels were higher in Korean than in Chinese samples.     

Removal of hydrogen chloride from gaseous streams using magnesium-aluminum oxide

Magnesium-aluminum oxide (Mg-Al oxide) obtained by thermal decomposition of Mg-Al layered double hydroxide (Mg-Al LDH) effectively removed HCl from gaseous streams. HCl removal was greater in the presence of added water vapor at all temperatures examined and increased with decreasing temperature in both the presence and absence of added water vapor. Wet and dry removal of gaseous HCl were attributed to the production of MgCl2 . 6H2O and MgCl2 . 4H2O, respectively. For the wet scrubbing process, the reconstruction reaction of Mg-Al LDH from Mg-Al oxide was the primary mechanism for increased HCl removal.     

Levels and regional trends of persistent organochlorines and polybrominated diphenyl ethers in Asian breast milk demonstrate POPs signatures unique to individual countries

Human breast milk samples collected in 2007–2008 from four countries, Vietnam (Hanoi), China (Beijing), Korea (Seoul) and Japan (Sendai, Kyoto and Takayama), were analyzed for persistent organic pollutants (POPs) such as dichlorodiphenyltrichloroethane and its metabolites (DDTs), chlordane-related compounds (CHLs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Comparing with previous surveys, the present study indicates that the DDTs in breast milk from China and Vietnam had gradually decreased during the last decade, but were still 5–10 times higher than those in other nations. The ratios of p,p′-DDE/p,p′-DDT and o,p′-DDT/p,p′-DDT were higher in Beijing than in the other countries, suggesting that there is less fresh intake of commercial DDT products and a possible exposure to dicofol in China. CHL and PCB levels were relatively higher in mothers from Japan, whereas β-HCH and HCB were more common in Chinese women. In Japan, it is suspected that mothers in the urban/coastal area (Sendai) were more continuously exposed to organochlorine pesticides (OCPs) than mothers in the rural/inland area (Takayama). In addition, OCP levels in primiparae were significantly higher than those in multiparae from Japan and Korea. These indicate that both parity and regional factors are major determinants of the levels of OCPs and PCBs in human milk. On the other hand, higher concentrations of PBDEs were observed in mothers' milk from Korea. The congener was dominated by BDE-47 (43–54%), followed by BDE-153 (23–33%) in all regions except for Beijing where BDE-28 (23%) was relatively abundant. In Japanese breast milk, regional and parity-dependent distributions were not observed for PBDEs. Among PBDE congeners, age-dependency was observed for BDE-153, which was negatively correlated (p < 0.05) to the age of mothers in Kyoto (17 participants were housewives), while it increased with age in Sendai (10 participants were clerks). No such correlation was seen for BDE-47, indicating that BDE-47 was ingested and assimilated via different kinetics or routes from BDE-153 in Japan.     

The effects of KI/Se(VI) molar ratio and initial concentration of Se(VI) on the reduction of Se(VI) to Se(IV) by KI

In this study, potassium iodide (KI) was found to be capable of reducing selenium(VI) to selenium(IV). When KI was added to Se(VI) solution, the Se(VI) concentration rapidly decreased with an increase in the KI/Se(VI) molar ratio. By using the potential-pH equilibrium diagram for the selenium/water system, we confirmed that Se(VI) reduced to Se(IV) because the potential of the solution shifted to the stable Se(IV) region upon the addition of KI. This reduction accompanies the oxidation of I⁻ to I₃⁻. The reduction of Se(VI) by KI was found to be effective for concentrated Se(VI) solutions.     

Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards

Tetrabromobisphenol-A (TBBA) is the most common brominated fire retardant. In this study, a TBBA containing paper laminated printed circuit board (PCB) prepared from novolac was pyrolysed by both TGA and in a quartz glass reactor between 40 and 1,000 degrees C. The products were online detected by MS. It was found that the PCB degraded in three steps. Step one (<270 degrees C) consisted of the evolution of water and CO(2) from the paper laminate. In the second step, between 270 and 370 degrees C, the fire retardant decomposed, releasing HBr and brominated aromatics. In the third step, at temperatures above 370 degrees C, the phenol resin decomposed and char was formed. Compared to pure TBBA, which mainly produces brominated phenols, the brominated products enclosed in the char released HBr during the last degradation step as well as during the second step. Most of the bromine left the resin in the form of HBr, with about 14% of the bromine being fixed in brominated aromatics and less than 2% remaining in the residue.     

Nonthermal Plasma Chemical Processing of Bromomethane

ABSTRACT

Nonthermal plasma chemical decomposition of bromomethane (CH₃Br) was investigated with a coaxial type packed-bed plasma reactor. It has been demonstrated that plasma chemical processing is an effective approach to decompose CH₃Br in a wide concentration range. It has been shown that CH₃Br decomposition reactivity depends on reactor operating factors such as background gas, O₂ concentration, and humidification. Higher decomposition efficiencies can be obtained in dry N₂. However, organic byproducts such as BrCN are concurrently produced under deaerated conditions. Water suppresses CH₃Br decomposition and also affects the yields of CO_x (CO and CO₂) and organic byproducts due to the involvement of some active species generated from water. The presence of O₂ retards CH₃Br decomposition by quenching high-energy electrons, while it suppresses organic byproducts and improves CO_x yield. The reacted carbons in CH₃Br are recovered as CO_x almost quantitatively in air. Higher CO₂ selectivities cannot be achieved by increasing O₂ concentration. NO_x formation, which is accompanied by CH₃Br decomposition, can be effectively suppressed by decreasing O₂ concentration down to 2%. Furthermore, reaction mechanisms are discussed by comparing the reactivities of CH₃Br and its congeners.