依据经济水平建立的华中-华南粮食运输模型

从中国土地利用现状出发,根据目前的中国粮食生产、粮食需求关系和地区经济水平差异等因素,建立了粮食调拨运输模型--计划经济型(非市场原理型)和市场原理型(自由购买型)。并将这两种模型分别应用到中国华中-华南地区,讨论了中国华中-华南地区的粮食储备变化特点。模拟结果显示:非市场原理型运输模型中,随着粮食运输强度系数的增大,城市地区的粮食不足现象逐步得到缓解;而粮食产地的粮食储量也将相应减少,粮食分布的区域不平衡不会长期存在。依据市场原理型运输模型,随着粮食吸收系数的增大,粮食储备迅速集中到沿海城市,此后粮食生产地区的粮食储备开始减少,内陆地区会出现大范围的粮食短缺现象。这种粮食分布的区域不平衡现象越来越大。     

Removal of chloride from ethylene glycol solution using alumina/zeolite membrane as a physical boundary between the organic and aqueous phases

The permeation of Cl^? ions from a NaCl/ethylene glycol (EG) solution during electrodialysis was investigated using alumina and alumina/zeolite membranes. Voltage changes had very little effect on Cl^? permeation through the alumina membrane, suggesting that the driving force for the permeation was concentration-gradient-induced diffusion, and not the electric field. Solvation of the Na⁺ ions by EG resulted in EG migration through the membrane. Replacement of the deionized water (electrolyte) in the anodic cell with NaOH resulted in increased Cl^? permeation, although a greater amount of EG migrated into the NaOH solution as well. No notable difference was observed in Cl^? permeation through the alumina and alumina/zeolite membranes, but EG migration decreased when using the latter membrane, suggesting that EG migration was prevented by the zeolite layer. The proposed alumina/zeolite membrane is, hence, useful for solvent recovery by electrodialysis, but its mechanical stability must be improved for industrial applications.     

Electrodialysis for NaCl/EG solution using ion-exchange membranes

A new concept for the recycling of poly(vinyl chloride) (PVC) has been introduced, including the dehydrochlorination of PVC in ethylene glycol (EG) with NaOH as a reactant, the subsequent separation of NaCl from EG by electrodialysis, and the recovery of chlorine for the synthesis of new PVC. In this work, the separation of NaCl by electrodialysis was investigated. About 98 % of the salt were recovered from EG, with less than 10 % of the EG permeating the membranes after 5 h.     

Detecting crucial dispersal pathways using a virtual ecology approach: A case study of the mirid bug <Emphasis Type="Italic">Stenotus rubrovittatus</Emphasis>

Detecting dispersal pathways is important both for understanding species range expansion and for managing nuisance species. However, direct detection is difficult. Here, we propose detecting these crucial pathways using a virtual ecology approach, simulating species dynamics using models, and virtual observations. As a case study, we developed a dispersal model based on cellular automata for the pest insect Stenotus rubrovittatus and simulated its expansion. We tested models for species expansion based on four landscape parameters as candidate pathways; these are river density, road density, area of paddy fields, and area of abandoned farmland, and validated their accuracy. We found that both road density and abandoned area models had prediction accuracy. The simulation requires simple data only to have predictive power, allowing for fast modeling and swift establishment of management plans.     

Validation of diffusive mini-samplers for aldehyde and VOC and its feasibility for measuring the exposure levels of elementary school children

Exposure to various chemicals can cause adverse effects to health, such as asthma and allergies, especially in children. Data on personal exposure levels in children are scarce, thus small lightweight diffusive mini-samplers for aldehydes and volatile organic compounds (VOCs) were designed to measure the exposure level of children to these chemicals. The aim of the study was to validate and examine the applicability of these mini-samplers for measuring daily chemical exposure. The diffusive mini-samplers are 20 mm in length, 11 mm in diameter, and 1.67 g in weight. The devices are cylindrically shaped with polytetrafluoroethylene membrane filters placed at each end. To measure aldehydes and acetone, 20 mg of 2,4-dinitrophenylhydrazine was used as an absorbent. To measure VOCs, a carbon molecular sieve was used. The sampling rate for each chemical was determined by parallel sampling with active samplers in a closed exposure bag. The blank levels of the chemicals and the storage stability of the device were tested. The mini-samplers were compared to commercially available diffusive samplers. To examine the applicability of the samplers, 65 elementary school children carried them for 24 h. The sampling rates for formaldehyde, acetaldehyde, and acetone were 20.9, 22.9, and 19.7 mL min(-1), respectively. The limits of quantification (LOQ) for the 24-hour sampling by high-performance liquid chromatography/ultraviolet (HPLC/UV) analysis were 8.3, 7.6, and 8.8 μg m(-3) for formaldehyde, acetaldehyde, and acetone, respectively. The sampling rates for the 11 VOCs were determined and ranged from 3.3 mL min(-1) for styrene and 2-ethyl-1-hexanol to 11.7 mL min(-1) for benzene. The LOQ for the 24-hour sampling by gas chromatography-mass spectrometry (GC-MS) analysis ranged from 5.9-105.2 μg m(-3), 1.1-24.7 parts per billion. The storage stability after 5 days ranged from 94.8 to 118.2%. Formaldehyde, acetone, benzene, and toluene were detected above the LOQ in more than 90% of the children, and the median concentrations were 21.7, 20.9, 10.1, and 21.5 μg m(-3), respectively. This study shows that the diffusive samplers developed were suitable for children to carry and were capable of measuring the children's daily chemical exposure.     

One-pot wet ball-milling for waste wire-harness recycling

Journal of Material Cycles and Waste Management - In this study, we developed a one-pot wet ball-milling method for the recovery of highly pure copper wire, poly(vinyl chloride) (PVC) coating, and...     

Alkaline hydrolysis of PVC-coated PET fibers for simultaneous recycling of PET and PVC

Journal of Material Cycles and Waste Management - Polyvinyl chloride (PVC)-coated poly(ethylene terephthalate) (PET) woven fibers are one of the hardest-to-recycle polymeric materials. Herein we...     

Thermal decomposition of tetrabromobisphenol-A containing printed circuit boards in the presence of calcium hydroxide

Journal of Material Cycles and Waste Management - Recycling of printed circuit boards (PCBs) is complicated by the presence of flame retardants containing halogen and phosphorus, as the degradation...     

Annual reproductive cycle of the chiton Acanthopleura japonica

Annual reproductive cycle of the chiton Acanthopleura japonica (Lischke) was studied by observing both gonad index and histological features from October 1980 to October 1981. No significant changes in each factor were observed from October to April. Increased values of gonad index and spermatogenesis or vitellogenesis in gondas were observed from May to September. In the same time, gonad index decreased and sperms or oocytes in gonalds disappeared in the days around spring tide, and they were recovered around neap tide. Suggested spawning around spring tide from May to September is also supported by the occurrence of released eggs in the days around the new and full moons.