Emissions of organic compounds from produced water ponds II: Evaluation of flux chamber measurements with inverse-modeling techniques

In this study, the authors apply two different dispersion models to evaluate flux chamber measurements of emissions of 58 organic compounds, including C2–C11 hydrocarbons and methanol, ethanol, and isopropanol from oil- and gas-produced water ponds in the Uintah Basin. Field measurement campaigns using the flux chamber technique were performed at a limited number of produced water ponds in the basin throughout 2013–2016. Inverse-modeling results showed significantly higher emissions than were measured by the flux chamber. Discrepancies between the two methods vary across hydrocarbon compounds and are largest in alcohols due to their physical chemistries. This finding, in combination with findings in a related study using the WATER9 wastewater emission model, suggests that the flux chamber technique may underestimate organic compound emissions, especially alcohols, due to its limited coverage of the pond area and alteration of environmental conditions, especially wind speed. Comparisons of inverse-model estimations with flux chamber measurements varied significantly with the complexity of pond facilities and geometries. Both model results and flux chamber measurements suggest significant contributions from produced water ponds to total organic compound emission from oil and gas productions in the basin.

Implications: This research is a component of an extensive study that showed significant amount of hydrocarbon emissions from produced water ponds in the Uintah Basin, Utah. Such findings have important meanings to air quality management agencies in developing control strategies for air pollution in oil and gas fields, especially for the Uintah Basin in which ozone pollutions frequently occurred in winter seasons.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

GIS and local knowledge in disaster management: a case study of flood risk mapping in Viet Nam

Linking community knowledge with modern techniques to record and analyse risk related data is one way of engaging and mobilising community capacity. This paper discusses the use of the Geographic Information System (GIS) at the local level and the need for integrating modern technology and indigenous knowledge into disaster management. It suggests a way to mobilise available human and technical resources in order to strengthen a good partnership between local communities and local and national institutions. The paper also analyses the current vulnerability of two communes by correlating hazard risk and loss/damage caused by disasters and the contribution that domestic risk maps in the community can make to reduce this risk. The disadvantages, advantages and lessons learned from the GIS flood risk mapping project are presented through the case study of the Quang Tho Commune in Thua Thien Hue province, central Viet Nam.     

An integrated and quantitative vulnerability assessment for proactive hazard response and sustainability: a case study on the Chan May-Lang Co Gulf area,Central Vietnam

A natural factors-based approach was developed to examine proactive responses to hazards and improving sustainability on the Chan May-Lang Co Gulf area, Central Vietnam. The approach was based on a weight-of-evidence method within an integrated and quantitative vulnerability assessment in which the spatial relationship between a set of evidential factors (lithology, distance to the coastline, altitude, slope, aspect, drainage, wind speed during storms, and land use and cover) and a set of hazard locations was combined with the prior probability (total vulnerability) to obtain the posterior probability of hazard occurrence. The result showed that 44.3 % of the study area had high to very high total vulnerability, due to the high density of vulnerable objects and frequency of severe damage from typhoons, floods, landslides, and erosion. The result also demonstrated that the contribution of natural factors was directly proportional to total vulnerability in approximately 75 % of the study area, indicating a high dependence of vulnerability on natural factors. In the remaining areas, low contributions were found in the high and very high vulnerability areas dominated by high anthropogenic activities. In contrast, natural factors were important contributors to total vulnerability in areas characterized by dense vegetation, consolidated rocks, and altitude greater than 300 m, reflecting high natural resilience. The present study demonstrated that a proactive approach may provide appropriate measures to mitigate hazards and to increase the sustainability of the study area.     

Spatial variability in chromophoric dissolved organic matter for an artificial coastal lake (Shiwha) and the upstream catchments at two different seasons

Selected water quality parameters and spectroscopic characteristics of dissolved organic matter (DOM) were examined during two different seasons for an artificial coastal lake (Shiwha Lake in South Korea), which are affected by seawater exchange due to the operation of a tidal power plant and external organic loadings from the upstream catchments. The coastal lake exhibited much lower concentrations of organic matter and nutrients than the upstream sources. The spectroscopic properties of the lake DOM were easily distinguished from those of the catchment sources as revealed by a lower absorption coefficient, lower degree of humification, and higher spectral slopes. The observed DOM properties suggest that the lake DOM may be dominated by smaller molecular size and less condensed structures. For the lake and the upper streams, higher absorption coefficients and fluorescence peak intensities but lower spectral slopes and humification index were found for the premonsoon versus the monsoon season. However, such seasonal differences were less pronounced for the industrial channels in the upper catchments. Three distinctive fluorophore groups including microbial humic-like, tryptophan-like, and terrestrial humic-like fluorescence were decomposed from the fluorescence excitation-emission matrix (EEM) of the DOM samples by parallel factor analysis (PARAFAC) modeling. The microbial humic-like component was the most abundant for the industrial channels, suggesting that the component may be associated with anthropogenic organic pollution. The terrestrial humic-like component was predominant for the upper streams, and its relative abundance was higher for the rainy season. Our principal component analysis (PCA) results demonstrated that exchange of seawater and seasonally variable input of allochthonous DOM plays important roles in determining the characteristics of DOM in the lake.     

Occurrence and suitability of pharmaceuticals and personal care products as molecular markers for raw wastewater contamination in surface water and groundwater

This study aimed to provide the first and comprehensive data on the occurrence of 17 target pharmaceuticals and personal care products (PPCPs) in urban water environment in Singapore. Meanwhile, this study also verified the suitability of these PPCPs as specific markers of raw wastewater contamination in receiving water bodies in highly urbanized areas where both surface water and groundwater are not impacted by the discharge of treated wastewater effluents. Analytical results of wastewater showed that among 17 target PPCPs examined, only 5 PPCPs were detected in 100 % of raw wastewater samples, including acetaminophen (ACT), carbamazepine (CBZ), caffeine (CF), diethyltoluamide (DEET), and salicylic acid (SA). Similarly, these PPCPs were found in most surface water and groundwater. Interestingly, the three PPCPs (ACT, CBZ, and SA) were only detected in surface water and groundwater in the sampling sites close to relatively older sewer systems, while they were absent in background samples that were collected from the catchment with no known wastewater sources. This suggests that ACT, CBZ, and SA can be used as specific molecular markers of raw wastewater in surface water and groundwater. This study also confirmed that CF and DEET were not really associated with wastewater sources, thus cannot serve well as specific molecular markers of wastewater contamination in receiving water bodies. To the best knowledge of the authors, the use of ACT and SA as specific molecular markers of raw wastewater contamination in urban surface waters and groundwater was first reported. Further studies on the use of ACT, CBZ, and SA along with other chemical/microbial markers are recommended to identify and differentiate contamination sources of surface waters/groundwater.     

Effects of functionality and textural characteristics on the removal of Cd(II) by ammoniated and chlorinated nanoporous activated carbon

Virgin activated carbon (VAC) was chemically activated by hydrochloric acid and aqueous ammonia to obtain different surface functionalities and nanopore distributions. The N-tailored AC (NAC) acquired by alkali treatment significantly enhanced the cadmium sorption capacity, while the Cl-tailored AC obtained by acidic modification decreased the sorption capacity compared with that of VAC. With increasing ammonia concentration in the basic treatment, the NAC surface area was increased with declining pore volume and diameter, which increased the adsorption capacity for Cd(II) removal. However, increasing HCl concentration in the acidic modification decreased the surface area, with increasing pore volume and diameter, which decreased the cadmium adsorption capacity. The basic treatment created more alkaline-rich sites such as nitrogen-containing functional groups, on the carbon surface, thereby improving cadmium removal efficiency. However, the acidic treatment generated a stronger acidic chemical structure and much more the formation of the acyl- and alkyl chloride groups that greatly inhibited the Cd(II) sorption capacity.     

Determination of commonly used polar herbicides in agricultural drainage waters in Australia by HPLC

The present study describes the application of different extraction techniques for the preconcentration of ten commonly found acidic and non-acidic polar herbicides (2,4-D, atrazine, bensulfuron-methyl, clomazone, dicamba, diuron, MCPA, metolachlor, simazine and triclopyr) in the aqueous environment. Liquid-liquid extraction (LLE) with dichloromethane, solid-phase extraction (SPE) using Oasis HLB cartridges or SBD-XC Empore disks were compared for extraction efficiency of these herbicides in different matrices, especially water samples from contaminated agricultural drainage water containing high concentrations of particulate matter. Herbicides were separated and quantified by high performance liquid chromatography (HPLC) with an ultraviolet detector. SPE using SDB-XC Empore disks was applied to determine target herbicides in the Murrumbidgee Irrigation Area (NSW, Australia) during a two-week survey from October 2005 to November 2005. The daily aqueous concentrations of herbicides from 24-h composite samples detected at two sites increased after run-off from a storm event and were in the range of: 0.1-17.8 microg l(-1), < 0.1-0.9 microg l(-1) and 0.2-17.8 microg l(-1) at site 1; < 0.1-3.5 microg l(-1), < 0.1-0.2 microg l(-1) and < 0.2-3.2 microg l(-1) at site 2 for simazine, atrazine and diuron, respectively.     

Potential health risks of toxic heavy metals and nitrate via commonly consumed bivalve and vegetable species in Ho Chi Minh City,Vietnam

Environmental Science and Pollution Research - This study aimed to evaluate the health risks of cadmium (Cd), lead (Pb), inorganic arsenic (As), and nitrate exposure through the consumption of...