Fuzzy decision analysis for integrated environmental vulnerability assessment of the mid-Atlantic Region

A fuzzy decision analysis method for integrating ecological indicators was developed. This was a combination of a fuzzy ranking method and the analytic hierarchy process (AHP). The method was capable of ranking ecosystems in terms of environmental conditions and suggesting cumulative impacts across a large region. Using data on land cover, population, roads, streams, air pollution, and topography of the Mid-Atlantic region, we were able to point out areas that were in relatively poor condition and/or vulnerable to future deterioration. The method offered an easy and comprehensive way to combine the strengths of fuzzy set theory and the AHP for ecological assessment. Furthermore, the suggested method can serve as a building block for the evaluation of environmental policies.     

Evaluation of Potential Molecular Markers for Urban Stormwater Runoff

Source specificity and persistence of several sulfur-polycyclic aromatic hydrocarbons (S-PAHs), nitro-PAHs (N-PAHs), and triphenylene were examined via analyses of stormwater runoff and wastewater effluent samples and spiked samples upon exposure to sunlight. Samples were collected during the 1997/1998 wet weather season from two major storm channels and four major wastewater treatment plants in southern California. Among the target compounds examined, 2-(4-morpholinyl)benzothiazole, dibenzothiophene, and triphenylene/chrysene were detected in storm runoff only. However, 2-(4-morpholinyl)benzothiazole appeared to degrade rapidly in seawater and sediment after sunlight exposure, which might impede its use as a runoff indicator. Dibenzothiophene and triphenylene also degraded quickly in sunlight-exposed seawater samples, but remained fairly abundant in sediments after six months of exposure to sunlight. They are by far the most promising candidates of urban runoff markers based on the criteria of abundance, source specificity, and persistence, although more research efforts are needed to ensure that no other sources would also contribute significantly to their presence in the aquatic environment.     

Coral reef aerosol emissions in response to irradiance stress in the Great Barrier Reef,Australia

We investigate the correlation between stress-related compounds produced by corals of the Great Barrier Reef (GBR) and local atmospheric properties—an issue that goes to the core of the coral ecosystem’s ability to survive climate change. We relate the variability in a satellite decadal time series of fine-mode aerosol optical depth (AOD) to a coral stress metric, formulated as a function of irradiance, water clarity, and tide, at Heron Island in the southern GBR. We found that AOD was correlated with the coral stress metric, and the correlation increased at low wind speeds, when horizontal advection of air masses was low and the production of non-biogenic aerosols was minimal. We posit that coral reefs may be able to protect themselves from irradiance stress during calm weather by affecting the optical properties of the atmosphere and local incident solar radiation.     

Recovering valuable metals from recycled photovoltaic modules

Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (>99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be ?$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply >88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a >99.98%-grade Si product by HNO₃/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520ºC using CaO–CaF₂–SiO₂ slag mixture to scavenge the residual metals after acid leaching could finally produce >99.998%-grade Si. A process based on HNO₃/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules.

Implications:The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its “green” image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.     

Reproductive biology of a deep-sea brittle star Amphiura carchara (Echinodermata: Ophiuroidea)

 New information on the brooding reproduction of Amphiura carchara, and previous studies of several deep-sea congeners, contradict the prevailing notion that direct development is exceptional among deep-sea echinoderms. Over 500 specimens of A. carchara from 2,850 to 4,100-m depths off the coast of California, USA, were studied. The species was found to be gonochoric, although most brooding species of ophiuroids are hermaphroditic. Females each brooded up to 72 embryos at a time, with up to 10 in a single bursa. The embryos of individual adults were often at different stages of development, but those brooded in a single bursa tended to be at the same stage. Thus, the species has characteristics that breach the distinctions between sequential and simultaneous brooding exhibited by shallow-water ophiuroids. The embryos developed from yolky eggs that are large for an ophiuroid, with the mean largest oocytes 0.45 mm, and ranging to 1.28 mm in diameter. Almost all late-stage embryos were positioned with their mouth and arms pressed against the wall of the bursa, possibly to facilitate the uptake of nutrients from the parent. Thus, A. carchara may be matrotrophic. The largest embryos examined had a rudimentary disk skeleton, and arms with four joints and a terminal plate. Emerging juveniles probably differ in disk diameter. The species appears to brood year round, although differences in gonad size, the incidence of brooding, and the relative numbers of early developmental stages in summer and winter samples indicated that there are seasonal trends in reproduction. Received: 14 February 2000 / Accepted: 3 July 2000     

The potential environmental risks of pharmaceuticals in Vietnamese aquatic systems: case study of antibiotics and synthetic hormones

Presently, many pharmaceuticals are listed as emerging contaminants since they are considered to be great potential threats to environmental ecosystems. These contaminants, thus, present significant research interest due to their extensive use and their physicochemical and toxicological properties. This review discusses a whole range of findings that address various aspects of the usage, occurrence, and potentially environmental risks of pharmaceuticals released from various anthropogenic sources, with emphasis on the aquatic systems in Vietnam. The published information and collected data on the usage and occurrence of antibiotics and synthetic hormone in effluents and aquatic systems of Vietnam is reported. This is followed by a potential ecological risk assessment of these pollutants. The extensive use of antibiotics and synthetic hormones in Vietnam could cause the discharge and accumulation of these contaminants in the aquatic systems and potentially poses serious risks for ecosystems. Vietnam is known to have extensively used antibiotics and synthetic hormones, so these contaminants are inevitably detected in aquatic systems. Thus, an appropriate monitoring program of these contaminants is urgently needed in order to mitigate their negative effects and protect the ecosystems.     

Day-of-Week Patterns of Particulate Matter and Its Chemical Components at Selected Sites in California

Abstract

This paper analyzes day-of-week variations in concentrations of particulate matter (PM) in California. Because volatile organic compounds (VOCs) and oxides of nitrogen (NO_x) are not only precursors of ozone (O₃) but also of secondary PM, it is useful to know whether the variations by day of week in these precursors are also evident in PM data. Concentrations of PM ≤10 μm (PM₁₀) and ≤2.5[H9262]m in aerodynamic diameter (PM_2.5) were analyzed. PM concentrations exhibit a general weekly pattern, with the maximum occurring late in the workweek and the minimum occurring on weekends (especially Sunday); however, this pattern does not prevail at all sites and areas. PM nitrate (NO₃ ^-) data from Size Selective Inlet (SSI) samplers in the South Coast Air Basin (SoCAB) tend to be somewhat lower on weekends compared with weekdays. During 1988–1991, the weekend average was lower than the weekday average at 8 of 13 locations, with an average decrease of 1%. During 1997–2000, the weekend average was lower than the weekday average at 10 of 13 locations, with an average decrease of 6%. The weekend averages are generally lower than weekday averages for sulfates, organic carbon, and elemental carbon. Because heavy-duty trucks typically represent a major source of elemental carbon, the weekend decrease in heavy-duty truck traffic may also result in a decrease in ambient elemental carbon concentrations.     

High-resolution mass spectrometry analysis of secondary organic aerosol generated by ozonolysis of isoprene

The chemical composition of secondary organic aerosol (SOA) generated from the ozonolysis of isoprene (C₅H₈) in the presence of an OH scavenger was examined using high-resolution electrospray ionization mass spectrometry (ESI-MS) in the mass range m/z = 50–1000. The chemical composition of SOA is complex, with more than 1000 assigned peaks observed in the positive and negative ion mode spectra. Only a small fraction of peaks correspond to known products of isoprene oxidation, such as pyruvic acid, glycolic acid, methylglyoxal, etc. The absolute majority of the detected peaks correspond to highly oxidized oligomeric constituents of SOA, with an average O:C molar ratio of 0.6. The corresponding organic mass (OM) to organic oxygen (OO) ratio is 2.4. Approximately 8% of oxygen atoms in SOA are in the form of peroxides, as quantified with an iodide test. Double bond equivalency (DBE) factors, representing the sum of all double bonds and rings, increase by 1 for every 1–2 additional carbon atoms in the molecule. The number of unoxidized CC double bonds is estimated to be less than 10%; the remaining DBE is due to CO carbonyl groups. Kendrick analysis suggests that the prevalent oligomer building blocks are small carbonyls with a C₁–C₂ skeleton. Formaldehyde (CH₂O) is identified as the most common repetitive building block in the observed oligomeric compounds.