A simplified method for sampling and analysis of high volume surface water for organic contaminants using XAD-2

A simple compressed-gas driven system for field processing and extracting water for subsequent analyses of hydrophobic organic compounds is presented. The pumping device is a pneumatically driven pump and filtration system that can easily clarify at 4 L/min. The extraction device uses compressed gas to drive filtered water through two parallel XAD-2 resin columns, at about 200 mL/min. No batteries or inverters are required for water collection or processing. Solvent extractions were performed directly in the XAD-2 glass columns. Final extracts are cleaned-up on Florisil cartridges without fractionation and contaminants analyzed by GC-MS. Method detection limits (MDLs) and recoveries for dissolved organic contaminants, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides are reported along with results of surface water analysis for the San Francisco Bay, CA.     

Chemical composition of post-harvest biomass burning aerosols in Gwangju, Korea

The main objective of this study was to investigate the chemical characteristics of post-harvest biomass burning aerosols from field burning of barley straw in late spring and rice straw in late fall in rural areas of Korea. A 12-hr integrated intensive sampling of particulate matter (PM) with an aerodynamic diameter less than or equal to 10 microm (PM10) and PM with an aerodynamic diameter less than or equal to 2.5 microm (PM2.5) biomass burning aerosols had been conducted continuously in Gwangju, Korea, during two biomass burning periods: June 4--15, 2001, and October 8--November 14, 2002. The fine and coarse particles of biomass burning aerosols were analyzed for mass and ionic, elemental, and carbonaceous species. The average fine and coarse mass concentrations of biomass burning aerosols were, respectively, 129.6 and 24.2 microg/m3 in June 2001 and 47.1 and 33.2 microg/m3 in October--November 2002. An exceptionally high PM2.5 concentration of 157.8 microg/m3 was observed during biomass burning events under stagnant atmospheric conditions. In the fine mode, chlorine and potassium were unusually rich because of the high content of semi-arid vegetation. Both organic carbon (OC) and elemental carbon increased during the biomass burning periods, with the former exhibiting a higher abundance. PM from the open field burning of agricultural waste has an adverse impact on local air quality and regional climate.     

The formation of reactive oxygen species catalyzed by neutral, aqueous extracts of NIST ambient particulate matter and diesel engine particles

It is important to characterize the chemical properties of particulate matter in order to understand how low doses, inhaled by a susceptible population, might cause human health effects. The formation of reactive oxygen species catalyzed by neutral, aqueous extracts of two ambient particulate samples, National Institute of Standards & Technology (NIST) Standard Reference Materials (SRM) 1648 and 1649, and two diesel particulate samples, NIST SRM 1650 and SRM 2975, were measured. The formation of reactive oxygen species was estimated by measuring the formation of malondialdehyde from 2-deoxyribose in the presence of ascorbic acid; H2O2 was not added to this assay. SRM 1649, ambient particulate matter collected from Washington, DC, generated the most malondialdehyde, while SRM 2975, diesel particulate matter collected from a forklift, yielded the least amount. Desferrioxamine inhibited the formation of malondialdehyde from the particulate samples providing additional data to support the observation that transition metals were involved in the generation of reactive oxygen species. Six transition metal sulfates (iron sulfate, copper sulfate, vanadyl sulfate, cobalt sulfate, nickel sulfate, and zinc sulfate) were assayed for their ability to generate reactive oxygen species under the same conditions used for the particulate samples in order to facilitate comparisons between particles and these transition metals. The concentration of transition metals was measured in aqueous extracts of these particulate samples using ion-coupled plasma mass spectrometry (ICP-MS) analysis. There was qualitative agreement between the concentrations of Fe, Cu, and V and the amount of malondialdehyde produced from extracts of these particulate samples. These data suggest that transition metals can be dissolved from particles in neutral, aqueous solutions and that these metals are capable of catalyzing the formation of reactive oxygen species.     

Modelling sulphate-enhanced cadmium uptake by Zea mays from nutrient solution under conditions of constant free Cd2+ ion activity

A controlled hydroponic experiment was undertaken to investigate Cd uptake in relation to the activity of Cd species in solution other than the free ion (Cd²⁺) by maintaining a constant Cd²⁺ activity under variable SO₄₂⁻ and Cl⁻ concentrations exposed to maize (Zea mays var. Cameron) plants. The objectives of these experiments were: (1) to distinguish and quantify the different uptake rates of free and inorganic-complexed Cd from nutrient solution, and (2) to model the uptake of Cd by maize with a Biotic Ligand Model (BLM) in a system which facilitates the close examination of root characteristics. Results of the current experiments suggest that, in addition to the free ion, CdSO₄⁰ complexes are important factors in determining Cd uptake in nutrient solution by maize plants. Higher nominal SO₄²⁻ concentrations in solution generally resulted in a greater Cd accumulation by maize plants than predicted by the Cd²⁺ activity. A better integration of the complete dataset for the 3 harvest times (6, 9 and 11 days after treatment) was achieved by including consideration of both the duration of Cd exposure and especially the root surface area to express Cd uptake. Similarly, the fit of the BLM was also improved when taking into account exposure time and expressing uptake in terms of root morphological parameters.     

Collective fit perceptions: A multilevel investigation of person–group fit with individual‐level and team‐level outcomes

This study describes a multilevel examination of person–group (PG) fit perceptions in a sample of 1023 individuals working in 92 teams at a private sector R&D firm. Using confirmatory factor analysis and multilevel random coefficient modeling, we provide evidence that perceptions of team‐level collective fit are unique from aggregated individual‐level PG fit perceptions at the individual and team levels. We demonstrate that collective values‐based and abilities‐based fit perceptions showed unique and positive relationships with team cohesion, team efficacy, and team performance, after accounting for aggregated individual perceptions of PG fit. Results also demonstrate that cohesion partially mediates the relationship between collective fit and team performance. Cross‐level effects were also supported, indicating that collective fit explains additional variance in individual‐level outcomes, beyond individual‐level PG fit perceptions. The usefulness of employing a multilevel approach to studying PG fit is discussed. Copyright © 2014 John Wiley & Sons, Ltd.