Diurnal photosynthesis, water use efficiency and light use efficiency of wheat under Mediterranean field conditions

Photosynthesis and transpiration rates of wheat leaves (Triticum aestivum L.) were measured at 30 min intervals under Mediterranean field conditions, using Photosynthesis Monitor system (PM-48M). The dynamics of net photosynthetic rate (P(N)), transpiration rate (E(T)), water use efficiency (WUE), light use efficiency (LUE), stomatal conductance (g(s)), photosynthetically active radiation (PAR), air temperature (T), relative humidity (RH), and atmospheric CO2 concentration (Catm) were quantified at five rainfed wheat sites with the same stages of development (midflowering) along south-to-north and east-to-west transects for eight days in April. Diurnal P(N) (3.6 to 6.6 micromol m(-2) s(-1)), PAR (392 to 564 micromol m2 sec(-1)), LUE (0.006 to 0.015) and WUE (0.0001 to 0.011) did not vary significantly across all five wheat sites (p > 0.05). P(N) and E(T) were strongly coupled and highly correlated with PAR (p < 0.001). Best multiple linear regression (MLR) models accounted for 92% of variations in P(N) as a function of PAR and E(T), and 90% in E(T) as a function of PAR and RH (p < 0.001). P(N) exhibited a peak at mid-morning, and a photosynthetic midday depression under the limiting effects of high evaporative demand. Diurnal variations in WUE and LUE showed a bimodal behavior with the maximum values in early morning and late afternoon. As the impacts of global climate change become increasingly felt, continuous measurements of climate-crop-soil-managementinteractions under natural conditions play a pivotal role not only in exploring changes in ecophysiological properties of strategic crops for food security such as wheat but also in devising preventive and mitigative management practices to ensure sustained agricultural productivity.     

Wind energy and Turkey

The global energy requirement for sustaining economic activities, meeting social needs and social development is increasing daily. Environmentally friendly, renewable energy resources are an alternative to the primary non-renewable energy resources, which devastate ecosystems in order to meet increasing demand. Among renewable energy sources such as hydropower, biopower, geothermal power and solar power, wind power offers distinct advantages to Turkey. There is an increasing tendency toward wind globally and the European Union adjusted its legal regulations in this regard. As a potential EU Member state, Turkey is going through a similar process. The number of institutional and legal regulations concerning wind power has increased in recent years; technical infrastructure studies were completed, and some important steps were taken in this regard. This study examines the way in which Turkey has developed support for wind power, presents a SWOT analysis of the wind power sector in Turkey and a projection was made for the concrete success expected to be accomplished in the future.     

Characterization, Fluxes and Toxicity of Leather Tanning Bath Chemicals in a Large Tanning District Area (IT)

The leather tanning industry is perceived as responsible of a significant consume of natural resources and output of wastes such as high concentration of organics, salts and heavy metals such as chromium, both in solid and liquid form as a result. Now as ever the future of tanneries strongly depends on the increase of their awareness that a sustainable industry for the future means embracing a forward-looking philosophy of the leather making process through optimal resource management within the tannery. This study reports the characterization of some chemicals used in a large tanning district area in terms of COD, BOD, aromaticity (UV₂₈₀) and double bond (UV₂₅₄) absorbance measurements, toxicity on fresh and saline water as well as terrestrial species, GC-MS scanning. The study provides a consistent set of information on tannin-associated concentration-related trends and suggests novel criteria in defining control quality for evaluating environmental impact of leather tanning industry.     

Removal of copper (II) from aqueous solution by adsorption onto low-cost adsorbents

The use of low-cost adsorbents was investigated as a replacement for current costly methods of removing metals from aqueous solution. Removal of copper (II) from aqueous solution by different adsorbents such as shells of lentil (LS), wheat (WS), and rice (RS) was investigated. The equilibrium adsorption level was determined as a function of the solution pH, temperature, contact time, initial adsorbate concentration and adsorbent doses. Adsorption isotherms of Cu (II) on adsorbents were determined and correlated with common isotherm equations such as Langmuir and Freundlich models. The maximum adsorption capacities for Cu (II) on LS, WS and RS adsorbents at 293, 313 and 333 K temperature were found to be 8.977, 9.510, and 9.588; 7.391, 16.077, and 17.422; 1.854, 2.314, and 2.954 mg g(-1), respectively. The thermodynamic parameters such as free energy (delta G0), enthalpy (delta H0) and entropy changes (delta S0) for the adsorption of Cu (II) were computed to predict the nature of adsorption process. The kinetics and the factors controlling the adsorption process were also studied. Locally available adsorbents were found to be low-cost and promising for the removal of Cu (II) from aqueous solution.     

Trace metal contamination of sediments in an e-waste processing village in China

This study examined trace metal contamination of sediments in Guiyu, China where primitive e-waste processing activities have been carried out. It was found that some river sediments in Guiyu were contaminated with Cd (n.d.-10.3mg/kg), Cu (17.0-4540mg/kg), Ni (12.4-543mg/kg), Pb (28.6-590mg/kg), and Zn (51.3-324mg/kg). The (206)Pb/(207)Pb and (208)Pb/(207)Pb ratios of the Pb-contaminated sediments of Lianjiang (1.1787+/-0.0057 and 2.4531+/-0.0095, respectively) were lower than those of Nanyang River (1.1996+/-0.0059 and 2.4855+/-0.0082, respectively), indicating a significant input of non-indigenous Pb with low (206)Pb/(207)Pb and (208)Pb/(207)Pb ratios. Copper, Pb and Zn in the non-residual fractions noticeably increased in the contaminated sediments compared to those in the uncontaminated sediments. A genuine concern is associated with potential transport of the contaminated sediments downstream and enhanced solubility and mobility of trace metals in the non-residual fractions.     

Evidence of excessive releases of metals from primitive e-waste processing in Guiyu, China

Guiyu, China is infamous for its involvement in primitive e-waste processing and recycling activities. Freshwater samples were collected in and outside of Guiyu for dissolved metal analysis. It was found that dissolved metal concentrations were higher in Lianjiang and Nanyang River within Guiyu than the reservoir outside of Guiyu. Lianjiang was enriched with dissolved As, Cr, Li, Mo, Sb and Se, while Nanyang River had elevated dissolved Ag, Be, Cd, Co, Cu, Ni, Pb and Zn. Temporal distributions of the metals suggested recent discharges of metals attributable to a strong acid leaching operation of e-waste, where dissolved Ag, Cd, Cu and Ni (0.344+/-0.014, 0.547+/-0.074, 87.6+/-3.0 and 93.0+/-1.4 microg/L, respectively) were significantly elevated. Pb isotopic composition of dissolved Pb confirmed that more than one non-indigenous Pb were present in Lianjiang and Nanyang River. In summary, it was evident that the riverine environment of Guiyu was heavily impacted by e-waste related activities.     

Integration of environmental and human health risk assessment for industries using hazardous materials: a quantitative multi criteria approach for environmental decision makers

Environmental management, for which environmental and human health risk assessment is the first stage, is a requirement for industries both before construction and during operation in order to sustain improved quality of life in the ecosystem. Therefore, the aim of this study is to propose an approach that integrates environmental and human health risk assessment for industries using hazardous materials in order to support environmental decision makers with quantitative and directive results. Analytic hierarchy process and fuzzy logic are used as tools to handle problems caused by complexity of environment and uncertain data. When the proposed approach is implemented to a scenario, it was concluded that it is possible to define risk sources with their risk classes and related membership degrees in that classes which enable the decision maker to decide which risk source has priority. In addition, they can easily point out and rank the factors contributing those risk sources owing to priority weights of them. As a result, environmental decision makers can use this approach while they are developing management alternatives for unfounded and on-going industrial plants using hazardous materials.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD(tot)), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD(tot), SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD(tot) removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

Analysis,occurrence and fate of commonly used pharmaceuticals and hormones in the Buyukcekmece Watershed,Turkey

The occurrence of 14 mostly used pharmaceuticals from different classes (antibiotics, β-blockers, non-steroidal anti-inflammatory drugs, and stimulant) and hormones in surface water in Istanbul, Turkey was investigated in this study. An important drinking water source, Buyukcekmece Lake and main rivers flowing into the lake were selected for the monitoring of the compounds. Sampling was conducted five different times in a year in order to observe seasonal changes. A rapid, robust and sensitive method using solid phase extraction and ultra-performance liquid chromatograph coupled with triple quadrupole tandem mass spectrometer was established for quantification of both pharmaceuticals and hormones. Limit of quantifications were between 0.5 and 1.1 ng L^?1. Recoveries were between 72–119% and 61–98% for ultra-pure water and for surface water, respectively. All selected compounds were detected at least once in the samples. Some pharmaceuticals were detected as high as a few of micrograms per liter levels in the rivers. Most frequently detected compounds were caffeine and antibiotics (amoxicillin, ciprofloxacin, erythromycin and sulfamethoxazole). Synthetic hormone (17α-ethynylestradiol) was detected only 4 times corresponding least detected compound in whole sampling period. Field data confirms that amoxicillin is more prone to degradation with respect to other antibiotics. Estrone and 17-β estradiol are converted to estriol by natural processes in surface water.     

The effects of walnut and pine leaves on bread wheat growth and frequence of common weed species in the East-Mediterranean region

A field experiment was carried out to determine the effects of walnut (Juglans regia L.) and pine (Pinus sp.) leaves on bread wheat (Triticum aestivum L.) growth and weed control, during 2001-02 and 2002-03 growing seasons in East Mediterranean region of Turkey. In this research, the treatments were: applications of ground walnut leaves (GWL) and ground pine leaves (GPL) at 19 g/m2 dose at Zadoks-11, applications of 200, 400 and 800 cc/m2 of walnut leaves extract (WLE2, WLE4 and WLE8 respectively), pine leaves extract (PLE2, PLE4 and PLE8 respectively), mixture extract of 200 cc walnut and 200 cc pine (ME), herbicide application (HA) at 8 g/m2 dose at Zadoks-21, and control (C) without any treatment. The results have indicated that the effects of treatments were significant for grain yield (GY), plant height (PH), flag leaf length (FLL), weed number per square meter (WN), but non significant for grain number per head (GN), grain weight per head (GW), 1000 grain weight (1000 GW), flag leaf width (FLW), head number per square meter (HN), vegetative period (VP), grain filling period (GFP) and days to maturity (DM).