Environmental Geochemistry and Health - Mangroves have wide applications in traditional medicines due to their several therapeutic properties. Potentially toxic elements (PTEs), in mangrove... 相似文献
Until the 20th century, forest policies across the globe focused primarily on effective forest utilization for timber production. Subsequent loss of forest land prompted many countries to review and amend such policies, in an attempt to incorporate the principles of conservation and sustainable forest management. One of the countries to implement such changes was India, which introduced new policies, acts and programmes to regulate forest conversion and degradation, beginning in the 1980s. These policies, acts, and programmes included the Forest Conservation Act of 1980, the National Forest Policy of 1988 and the Hon. Supreme Court Order of 1996. All of these regulations affected the timber supply from government forest areas, and created a huge gap in timber supply and demand. Currently, this deficit is met through imports and trees outside forests (TOFs). Timber production from government forest areas is abysmally low (3.35% of total demand) compared to potential timber production from TOFs, which fulfil 45% of the total timber demand in India. This implies that TOFs have immense potential in meeting the growing timber demand; however, they have not been fully utilized due to discrepancies in state level TOFs’ policies. The present paper provides a review of different forest policies, acts and guidelines in relation to timber production in India, and provides specific recommendations in order to maximize timber production in the context of increasing demand for timber products. 相似文献
Environmental Science and Pollution Research - Magnetite (Fe3O4) nanoparticles coated with dextrose and gluconic acid possessing both super-paramagnetism and excellent optical properties have been... 相似文献
The issue of E-waste disposal is concerning all the stakeholders, from policymakers to the end users which have accelerated the research and development on environmentally sound disposal of E-waste. The recovery of metals (gold, tantalum, copper, iron etc.) from E-waste has become an important focus. The mechanical recycling, thermo-chemical processes like pyrolysis, pyro-, hydro- and biometallurgical processes can play important roles in the Metal Recovery from E-waste (MREW) technology. For the industrial application of the MREW technology, it is important to analyze the sustainability. In this paper, two case studies have been presented on E-waste recycling industries in India and China. Based on the literature data, an attempt has been made to assess qualitatively the overall sustainability of MREW technology considering the three pillars, i.e., environmental, economic and social. Two conceptual frameworks with (Option-2) and without (Option-1) pyrolysis for integrated MREW units have been developed and the generalized energy and environmental impact analysis has been made using the principles of LCA. The impacts of two options have been compared. Option 2 has been found to be more efficient and sustainable. It has been realized that climate change, fossil fuel depletion, water depletion, eutrophication, acidification, fresh and marine water ecotoxicity are possible impact categories. The recommendations based on the generalized assessment are in good agreement with the findings of previous researchers on individual steps of MREW unit. The findings of this paper are expected to be beneficial to researchers and stakeholders for research directions and decision making on MREW.
A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)3) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)3, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)3 were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)3 treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)3. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging. 相似文献
The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM2.5 was recorded as 121.9 ± 93.2 μg m?3 (range 25.1–429.8 μg m?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM2.5. Strong seasonal variation was observed in PM2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM2.5 from the north-west India and Pakistan were mostly pertinent. 相似文献
Adsorptive removal of copper by activated carbon derived from modified rice husk (ACRH) was studied in the presence and absence of magnetic field (MF). The ACRH was prepared from the normal rice husk treated by NaOH solution and subsequent pyrolysis at 450 °C in the absence of oxygen. The physicochemical properties of ACRH's were determined before and after the adsorption process to delineate the adsorption mechanism. The BET analysis confirmed that the fabricated ACRH has a specific surface area of 8.244 m2/g with a mesopore to micropore ratio of 0.974. It was observed that the micropore structure gradually replaced the mesopores, and the surface area of the micropore increased (from 0.9219 to 4.1764 m2/g), and the pore diameter was also decreased from 180.381 to 46.249 Å after pyrolysis. The CHNO/S test result reveals that the carbon content was increased from 42 to 67.8% in the ACRH after pyrolysis. The batch sorption studies were performed by varying the initial adsorbate concentration, temperature, agitation speed, pH, adsorbent dose and contact time for magnetic and non-magnetic conditions to analyze the effect of the magnetic field. The univariate studies show that the maximum experimental adsorption capacity was 4.522 mg/g and 3.855 mg/g, respectively, for these two conditions (representing the magnetic impact) at 25 °C with an adsorbent dose of 2 g/L and an agitation speed of 150 rpm. It was also observed that the removal efficiency was 94.55% and 77.96% (magnetic and non-magnetic condition) at pH 7 with a concentration of 10 mg/L in 2 h. The test result on the impact of exposure time on the magnetic field suggested that the magnetic memory influenced the removal efficiency; after 40 to 60 min, the maximum removal efficiency was achieved, around 80 to 90%. The pseudo-second-order kinetic model was best fitted with the experimental data with a rate constant as 0.1749 and 0.1006 g/mg/min for these two conditions. The Temkin model delineates the adsorption isotherm suggesting the heat generated during the adsorption process is linearly abate with the coverage of the surface area of the adsorbent. The thermodynamic model confirms that the copper adsorption is spontaneous (ΔG = ? 3.91 kJ/mol and ? 6.02 kJ/mol), wherein the negative enthalpy value (ΔH = ? 36.74 kJ/mol and ? 25.74 kJ/mol) suggested that the process is exothermic irrespective of magnetic interference. The significant enhancement of copper removal was observed by incorporating the magnetic field, showing an increase in sorption capacity by 17.48% and a reduction of reaction time by 88.12%.
