Use of Ammophila arenaria for Dune Stabilization in South Africa and Its Current Distribution—Perceptions and Problems

Ammophila arenaria (marram or European beach grass) for dune stabilization in South Africa in the past and present, its present distribution in South Africa, and the perceptions of coastal management agencies and the public about its further use. The planting of A. arenaria became the most important means of dune stabilization, by human intervention, along the South African Cape coast in this century. Its modern distribution from the semiarid west coast to the subtropical shores of the Eastern Cape extends through various climatic zones. Although historical data are missing for some areas, there is no indication of its unaided spread. A. arenaria occurs at most sites because of its prior planting. The South African climate appears to affect its vigor. However, concern about the use of the alien grass has been raised since it has proved to be a highly invasive species in other parts of the world, particularly along the North American west coast and in Tasmania. While the CSIR (Council of Scientific and Industrial Research) promotes its use, CNC (Cape Nature Conservation) follows a policy that restricts the use of any alien plant, including A. arenaria, and requests further research on its invasive properties. Although a questionnaire survey shows that stabilization sites featuring large areas of A. arenaria are accepted by the South African public, current coastal management practices need to be analyzed critically. A thorough investigation of the potential invasiveness of A. arenaria on South African coastal dunes will be essential and shed new light on the American A. arenaria problem.     

Growth responses and metal accumulation capabilities of woody plants during the phytoremediation of tannery sludge

Five woody plants species (i.e. Terminalia arjuna, Prosopis juliflora, Populus alba, Eucalyptus tereticornis and Dendrocalamus strictus) were selected for phytoremediation and grow on tannery sludge dumps of Common Effluent Treatment Plant (CETP), Unnao (Uttar Pradesh), India. Concentration of toxic metals were observed high in the raw tannery sludge i.e. Fe-1667 > Cr-628 > Zn-592 > Pb-427 > Cu-354 > Mn-210 > Cd-125 > Ni-76 mg kg⁻¹ dw, respectively. Besides, physico-chemical properties of the raw sludge represented the toxic nature to human health and may pose numerous risks to local environment. The growth performances of woody plants were assessed in terms of various growth parameters such as height, diameter at breast height (DBH) and canopy area of plants. All the plant species have the capabilities to accumulate substantial amount of toxic metals in their tissues during the remediation. The ratio of accumulated metals in the plants were found in the order Fe > Cr > Mn > Pb > Zn > Cu > Cd > Ni and significant changes in physico-chemical parameters of tannery sludge were observed after treatment. All the woody plants indicated high bioconcentration factor for different metals in the order Fe > Cr > Mn > Ni > Cd > Pb > Zn > Cu. After one year of phytoremediation, the level of toxic metals were removed from tannery sludge up to Cr (70.22)%, Ni (59.21)%, Cd (58.4)%, Fe (49.75)%, Mn (30.95)%, Zn (22.80)%, Cu (20.46)% and Pb (14.05)%, respectively.     

Rural fences in agricultural landscapes and their conservation role in an area of caatinga (dryland vegetation) in Northeast Brazil

Fences are very common in rural areas, and represent important landscape elements in both tropical and temperate climate regions. In spite of their marked presence and importance, fences have been little studied, principally in Brazil. The present study examined the types of fences, the diversity of species used in their construction, as well as the diversity of their uses in a rural community in the municipality of Caruaru, Pernambuco State, northeastern Brazil. Fifty meters of fence-line in each of 50 rural properties in the community were examined, noting the diameter, height and identity of all vegetation elements used in their composition. Semi-structured interviews were also held with their builders in order to obtain information concerning fence uses. In the total of 2,500 linear meters of fence-line, 4,953 individual plant elements were identified, belonging to 51 different species. A majority of the fence elements were non-living fence posts, although the number of living posts was high. Of the total number of fence elements, 66.7% were native to the caatinga region. The large number of native species used as non-living fence posts indicates an intensive use of the caatinga vegetation and suggests the need to stimulate the use of living fence posts for conservation purposes.     

Hydrogen production using thermocatalytic decomposition of methane on Ni<Subscript>30</Subscript>/activated carbon and Ni<Subscript>30</Subscript>/carbon black

Hydrogen is an energy carrier of the future need. It could be produced from different sources and used for power generation or as a transport fuel which mainly in association with fuel cells. The primary challenge for hydrogen production is reducing the cost of production technologies to make the resulting hydrogen cost competitive with conventional fuels. Thermocatalytic decomposition (TCD) of methane is one of the most advantageous processes, which will meet the future demand, hence an attractive route for CO_x free environment. The present study deals with the production of hydrogen with 30 wt% of Ni impregnated in commercially available activated carbon and carbon black catalysts (samples coded as Ni₃₀/AC and Ni₃₀/CB, respectively). These combined catalysts were not attempted by previous studies. Pure form of hydrogen is produced at 850 °C and volume hourly space velocity (VHSV) of 1.62 L/h g on the activity of both the catalysts. The analysis (X-ray diffraction (XRD)) of the catalysts reveals moderately crystalline peaks of Ni, which might be responsible for the increase in catalytic life along with formation of carbon fibers. The activity of carbon black is sustainable for a longer time compared to that of activated carbon which has been confirmed by life time studies (850 °C and 54 sccm of methane).     

A study on evaluation of probable sources of heavy metal pollution in groundwater of Kalpakkam region, South India

This study investigates the heavy metal pollution vulnerability of the groundwater in the coastal aquifers of Kalpakkam region in the state of Tamilnadu, India. Integrated-approach includes pollution evaluation indices, principal component analysis (PCA), and correlation matrix (CM) to evaluate the intensity and source of pollution in groundwater. The data have been used for the calculation of heavy metal pollution index (HPI) and degree of contamination (C _d). The mean metal levels in groundwater followed a descending order as: Zn?>?Ba?>?Fe?>?Al?>?Se?>?Mn?>?Cu?>?Ni?>?Pb?>?Cr?>?Mo?>?As?>?Cd?>?Sb?>?Be. The concentrations of Fe, Cd, Zn, Se, Ba, Mn, Ni, Pb, and Al in some of the groundwater samples exceed the maximum admissible concentration (MAC). The HPI and C _d yield different results despite significant correlations between them. The following elemental associations were obtained from PCA and CM: Fe?CMn?CNi?CCr?CPb?CCd?CZn?CBe?CAl, Cu?CAs, Sb?CAs, Al?CBa and Se?CMo, which could be linked to anthropogenic sources (i.e., processes of tannery and dying industries with some contribution from the landfill leachate and municipal sewage). GIS-based factor score maps suggest that the activities of tannery industries and landfill leachate are pervasive processes in the area. This study has provided the evidence that effluents discharged from the tannery and auxiliary industries and landfill leachate are the main sources of heavy metal pollution in the groundwater. The high metal concentrations observed in the groundwater may have serious public health and potential environmental hazard implications.     

Stormwater harvesting from landscaped areas: effect of herbicide application on water quality and usage

The suitability of stormwater harvested from pervious pavement system (PPS) structures for reuse purposes was investigated in conditions where glyphosate-containing herbicides (GCH) are applied as part of PPS maintenance procedure. The experiment was based on the four-layered design previously described as detailed in CIRIA C582. Results indicated that the highest sodium absorption ratio (SAR) of 1.6 recorded in this study, was less than that at which loss of permeability begins to occur as well as deterioration of matrix structure. Furthermore, the maximum electrical conductivity (ECw) of 2990 μS cm^?1, recorded for 7200 mg L^?1 concentration (GCH) was slightly below the unstable classification range at which salinity problems related to water quality occur such that salts accumulate in the root zone to the extent that crop yields are adversely affected. However, GCH concentration of 720 mg L^?1 was within ‘permissible’ range while that of 72 mg L^?1 was within ‘excellent’ range. Current study raises some environmental concerns owing to the overall impact that GCH at concentrations above 72 mg L^?1 exerts on the net performance of the organic decomposers, heavy metal and hydrocarbon release from the system and thus, should be further investigated. However, effluent from all the test models including those dosed with high GCH concentration of 7200 mg L^?1 do not pose any threat in terms of infiltration or deterioration associated with salinity although, there are indications that high dosage of the herbicide could lead to an elevated electrical conductivity of the recycled water.

Open image in new window

Graphical abstract Impact of herbicide on irrigation water quality

     

Straßenversiegelung in Deutschland und ihre Beinflussung der Umwelt im Vergleich mit anderen OECD-Ländern

Since the increasing awareness of environmental damage, attention has focussed on the problems caused by the extension of car traffic. The number of cars has permanently increased over the years and is predicted to continue in the future. The number of cars registered worldwide already passed the number of 500 million in the year 1988 (OECD, 1995). Two major problems are linked to the increase in car traffic: The air pollution by engine conbustion and the so-called sealing of the ground by pavements. The streets dramatically cut into coherent areas, separate biotopes, animal and plant populations (BBR, 1998). Facts about grund sealing in Germany are presented and compared to those of other OECD-countries. Environmental consequences are discussed.     

Characterization of alkylphenol metabolites in fish bile by enzymatic treatment and HPLC-fluorescence analysis

Alkylphenol (AP) metabolites were characterized in the bile of Atlantic cod (Gadus morhua L.) after exposure to nine individual compounds (10mg/kg fish), 2-methylphenol (2-MP), 4-methylphenol (4-MP), 3,5-dimethylphenol (3,5-DMP), 2,4,6-trimethylphenol (2,4,6-TMP), 4-tert-butylphenol (4-t-BP), 4-tert-butyl-2-methylphenol (4-t-B-2-MP), 4-n-pentylphenol (4-n-PP), 4-n-hexylphenol (4-n-HexP) and 4-n-heptylphenol (4-n-HepP), and a mixture (total dose; 13.5 mg/kg fish) of the nine APs by inter-muscular injection. The degree of alkylation ranged from methyl (C1) to heptyl (C7) and represents the types of APs present in produced water. Fish bile was collected on day 4 and 16 (exposure groups 2-MP, 3,5-DMP, 2,4,6-TMP and 4-t-B-2-MP) following exposure. Characterization of major metabolites was accomplished by enzymatic de-conjugation and analysis by high performance liquid chromatography connected to a fluorescence detector (HPLC-F) acquiring at ex/em 222/306 nm. Two solid phase extraction (SPE) columns were evaluated for clean-up of samples prior to analysis. Independent of alkyl homologue, the glucuronide conjugated APs were the most abundant metabolites (73-100%), whereas sulfates, glucosides and unchanged compounds were excreted in amounts of 0-21%, 0-6.1% and 0-6.3%, respectively. The total concentration of measured metabolites in the bile, determined as their respective APs after de-conjugation, increased with increasing degree of alkylation (3.2+/-2.6 microg/g bile for 2-MP and 571+/-81 microg/g bile for 4-n-HepP) after exposure to an equal dose of AP. Comparison of metabolite concentrations in bile sampled 4 and 16 days after exposure, showed that the levels of 2-MP, 2,4,6-TMP and 4-t-B-2-MP were reduced by 55%, 30% and 45%, respectively whereas 3,5-DMP increased by 25% (not significant). This study suggests that analysis of de-conjugated metabolites in fish bile can be used to monitor AP exposure to fish, due to the relatively high and persistent level of these compounds. However, although HPLC-F is suitable for laboratory exposures, it might not be sufficient selective for field studies.     

Petroleum hydrocarbons and limiting nutrients in <Emphasis Type="Italic">Macura reptantia</Emphasis>, <Emphasis Type="Italic">Procambarus clarkii</Emphasis> and benthic sediment from Qua Iboe Estuary,Nigeria

The levels of total petroleum hydrocarbons in two commonly consumed benthopelagic shellfishes, Macura reptantia and Procambarus clarkii, harvested from benthic sediment of Qua Iboe Estuary were determined using a gas chromatography with flame-ionization detector. Seventy-two (72) samples each of benthic sediment and the shellfishes were collected monthly between June 2003 and February 2004 covering the peak periods of the wet and dry seasons. Concentrations of hydrocarbons were highly variable and ranged between 5.00 and 232.00 μg/g dry weight of benthic sediment, 3.05 and 11.30 μg/g dry weight of M. reptantia, 1.62 and 9.00 μg/g dry weight of P. clarkii. Pearson’s correlation analysis of total hydrocarbon concentrations in subtidal sediments with levels in the fauna species yielded positive significant (P < 0.05) correlations in M. reptantia (r = 0.737) and P. clarkii (r = 0.924). This is indicative of a long term and chronic accumulation of hydrocarbons in the estuarine ecosystem, reflecting the potential for exposure of the resident biota and the risk to human health.     

Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica

In this study, palm oil mill effluent (POME) was used as an alternative medium for algal biomass and lipid production. The influence of different concentrations of filtered and centrifuged POME in sea water (1, 5, 10 and 15%) on microalgal cell growth and lipid yield were investigated. Both Nannochloropsis oculata and Tetraselmis suecica had enhanced cell growth and lipid accumulation at 10% POME with maximum specific growth rate (0.21 d^–1 and 0.20 d^–1) and lipid content (39.1 ± 0.73% and 27.0 ± 0.61%), respectively, after 16 days of flask cultivation. The total Saturated Fatty Acid (SFA) (59.24%, 68.74%); Monounsaturated Fatty Acid (MUFA) (15.14%, 12.26%); and Polyunsaturated Fatty Acid (PUFA) (9.07%, 8.88%) were obtained for N. oculata and T. suecica, respectively, at 10% POME. Algal cultivation with POME media also enhanced the removal of Chemical Oxygen Demand (COD) (93.6–95%), Biological Oxygen Demand (BOD) (96–97%), Total Organic Compound (TOC) (71–75%), Total Nitrogen (TN) (78.8–90.8%) and oil and grease (92–94.9%) from POME.