Landfill leachate treatment by electrochemical oxidation

This study investigated the electrochemical oxidation of stabilized leachate from Pulau Burung semi-aerobic sanitary landfill by conducting laboratory experiments with sodium sulfate Na₂SO₄ (as electrolyte) and graphite carbon electrodes. The control parameters were influent COD, current density and reaction time, while the responses were BOD removal, COD removal, BOD:COD ratio, color and pH. Na₂SO₄ concentration was 1 g/L. Experiments were conducted based on a three-level factorial design and response surface methodology (RSM) was used to analyze the results. The optimum conditions were obtained as 1414 mg/L influent COD concentration, 79.9 mA/cm² current density and 4 h reaction time. This resulted in 70% BOD removal, 68% COD removal, 84% color removal, 0.04 BOD/COD ratio and 9.1 pH. Electrochemical treatment using graphite carbon electrode was found to be effective in BOD, COD and color removal but was not effective in increasing the BOD/COD ratio or enhancing biodegradability of the leachate. The color intensity of the treated samples increased at low influent COD and high current density due to corrosion of electrode material.     

Energy efficiency evaluation,changing trends and determinants of energy productivity growth across South Asian countries: SBM-DEA and Malmquist approach

Environmental Science and Pollution Research - Energy efficiency is widely regarded as the most efficient means of supplying additional energy to meet the rising demand. However, extensive energy...     

Synthesis of Succinylated Starches and Their Application as Adsorbents for the Removal of Phenol

Journal of Polymers and the Environment - Succinylated starches (SS) were prepared by the reaction of normal starch (NS) and porous starch (PS) with succinic anhydride (SA) in the presence of DMF...     

Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Environmental Science and Pollution Research - The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted...     

Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

The present study validates the oil-based paint bioremediation potential of Bacillus subtilis NAP1 for ecotoxicological assessment using a three-dimensional multi-species bio-testing model. The model included bioassays to determine phytotoxic effect, cytotoxic effect, and antimicrobial effect of oil-based paint. Additionally, the antioxidant activity of pre- and post-bioremediation samples was also detected to confirm its detoxification. Although, the pre-bioremediation samples of oil-based paint displayed significant toxicity against all the life forms. However, post-bioremediation, the cytotoxic effect against Artemia salina revealed substantial detoxification of oil-based paint with LD₅₀ of 121 μl ml^?1 (without glucose) and >?400 μl ml^?1 (with glucose). Similarly, the reduction in toxicity against Raphanus raphanistrum seeds germination (%FG?=?98 to 100%) was also evident of successful detoxification under experimental conditions. Moreover, the toxicity against test bacterial strains and fungal strains was completely removed after bioremediation. In addition, the post-bioremediation samples showed reduced antioxidant activities (% scavenging?=?23.5?±?0.35 and 28.9?±?2.7) without and with glucose, respectively. Convincingly, the present multi-species bio-testing model in addition to antioxidant studies could be suggested as a validation tool for bioremediation experiments, especially for middle and low-income countries.

?

     

Impact of storm water on groundwater quality below retention/detention basins

Groundwater from 33 monitoring of peripheral wells of Karachi, Pakistan were evaluated in terms of pre- and post-monsoon seasons to find out the impact of storm water infiltration, as storm water infiltration by retention basin receives urban runoff water from the nearby areas. This may increase the risk of groundwater contamination for heavy metals, where the soil is sandy and water table is shallow. Concentration of dissolved oxygen is significantly low in groundwater beneath detention basin during pre-monsoon season, which effected the concentration of zinc and iron. The models of trace metals shown in basin groundwater reflect the land use served by the basins, while it differed from background concentration as storm water releases high concentration of certain trace metals such as copper and cadmium. Recharge by storm water infiltration decreases the concentration and detection frequency of iron, lead, and zinc in background groundwater; however, the study does not point a considerable risk for groundwater contamination due to storm water infiltration.     

Spatial distribution of drinking and irrigation water quality indices of Ghizer River Basin,northern Pakistan

Environmental Science and Pollution Research - Determining the water contamination of a river that threatens the dependent ecological community is a pillar for sustainable management. For this...     

Barbecued desi chicken: an investigation on the impact of polluted milieu upon formation and ingestion of polycyclic aromatic hydrocarbons (PAHs) in commercial versus laboratory barbecued organs along with stochastic cancer risk assessments in people from an industrial district of Punjab,Pakistan

Environmental Science and Pollution Research - 8∑PAHs in 2- and 4-month-old desi chicken organs collected from Faisalabad district, Punjab, Pakistan, were examined via high-performance liquid...     

Dielectric and Material Properties of Poly (Vinyl Alcohol): Based Modified Red Mud Polymer Nanocomposites

Red mud emerges as the major waste material during production of alumina from bauxite by the Bayer??s process. Based on economics as well as environmental related issues, enormous efforts have been directed worldwide towards red mud management issues i.e. of utilization, storage and disposal. The present research work has been undertaken with an objective to explore the use of red mud as a reinforcing material in the polymer matrix as a low cost option. The silicate layered red mud was organophilized by aniline formaldehyde and to know the effect of various filler loading on the material properties of PVA-organophilized red mud composites, prepared by a conventional solvent casting technique and comparison of the same with that of the virgin poly (vinyl alcohol) (PVA), various characterizations was done. The modified red mud was typically characterized by X-ray diffraction. The X-ray diffraction pattern of the composite materials was also studied. The morphological image of the composite materials was studied by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) was used to characterize the dispersion of the red mud within the composite materials. The surface topography of the composite materials was studied by Atomic Force Microscopy (AFM). The dielectric properties of composite materials were investigated in wide frequency ranges from 1?MHz to 1?GHz.     

Ionic liquids for the inhibition of gas hydrates. A review

The formation of gas hydrates is a major issue during the operation of oil and gas pipelines, because gas hydrates cause plugging, thereby disrupting the normal oil and gas flows. A solution is to inject gas hydrate inhibitors such as ionic liquids. Contrary to classical inhibitors, ionic liquids act both as thermodynamic inhibitors and hydrate inhibitors, and as anti-agglomerates. Imidazolium-based ionic liquids have been found efficient for the inhibition of CO₂ and CH₄ hydrates. For CO₂ gas hydrates, N-ethyl-N-methylmorpholinium bromide showed an average depression temperature of 1.72 K at 10 wt% concentration. The induction time of 1-ethyl-3-methyl imidazolium bromide is 36.3 h for CO₂ hydrates at 1 wt% concentration. For CH₄ hydrates, 1-ethyl-3-methyl-imidazolium chloride showed average depression temperature of 4.80 K at 40 wt%. For mixed gas hydrates of CO₂ and CH₄, only quaternary ammonium salts have been studied. Tetramethyl ammonium hydroxide shifted the hydrate liquid vapour equilibrium to 1.56 K at 10 wt%, while tetrabutylammonium hydroxide showed an induction time of 0.74 h at 1 wt% concentration.