The Baltic Sea spring phytoplankton bloom in a changing climate: an experimental approach

The response of the Baltic Sea spring bloom was studied in mesocosm experiments, where temperatures were elevated up to 6°C above the present-day sea surface temperature of the spring bloom season. Four of the seven experiments were carried out at different light levels (32–202?Wh?m^?2 at the start of the experiments) in the different experimental years. In one further experiment, the factors light and temperature were crossed, and in one experiment, the factors density of overwintering zooplankton and temperature were crossed. Overall, there was a slight temporal acceleration of the phytoplankton spring bloom, a decline of peak biomass and a decline of mean cell size with warming. The temperature influence on phytoplankton bloom timing, biomass and size structure was qualitatively highly robust across experiments. The dependence of timing, biomass, and size structure on initial conditions was tested by multiple regression analysis of the y-temperature regressions with the candidate independent variables initial light, initial phytoplankton biomass, initial microzooplankton biomass, and initial mesozooplankton (=copepod) biomass. The bloom timing predicted for mean temperatures (5.28°C) depended on light. The peak biomass showed a strong positive dependence on light and a weaker negative dependence on initial copepod density. Mean phytoplankton cell size predicted for the mean temperature responded positively to light and negatively to copepod density. The anticipated mismatch between phytoplankton supply and food demand by newly hatched copepod nauplii occurred only under the combination of low light and warm temperatures. The analysis presented here confirms earlier conclusions about temperature responses that are based on subsets of our experimental series. However, only the comprehensive analysis across all experiments highlights the importance of the factor light.     

Null model analysis of species associations using abundance data

The influence of negative species interactions has dominated much of the literature on community assembly rules. Patterns of negative covariation among species are typically documented through null model analyses of binary presence/absence matrices in which rows designate species, columns designate sites, and the matrix entries indicate the presence (1) or absence (0) of a particular species in a particular site. However, the outcome of species interactions ultimately depends on population-level processes. Therefore, patterns of species segregation and aggregation might be more clearly expressed in abundance matrices, in which the matrix entries indicate the abundance or density of a species in a particular site. We conducted a series of benchmark tests to evaluate the performance of 14 candidate null model algorithms and six covariation metrics that can be used with abundance matrices. We first created a series of random test matrices by sampling a metacommunity from a lognormal species abundance distribution. We also created a series of structured matrices by altering the random matrices to incorporate patterns of pairwise species segregation and aggregation. We next screened each algorithm-index combination with the random and structured matrices to determine which tests had low Type I error rates and good power for detecting segregated and aggregated species distributions. In our benchmark tests, the best-performing null model does not constrain species richness, but assigns individuals to matrix cells proportional to the observed row and column marginal distributions until, for each row and column, total abundances are reached. Using this null model algorithm with a set of four covariance metrics, we tested for patterns of species segregation and aggregation in a collection of 149 empirical abundance matrices and 36 interaction matrices collated from published papers and posted data sets. More than 80% of the matrices were significantly segregated, which reinforces a previous meta-analysis of presence/absence matrices. However, using two of the metrics we detected a significant pattern of aggregation for plants and for the interaction matrices (which include plant-pollinator data sets). These results suggest that abundance matrices, analyzed with an appropriate null model, may be a powerful tool for quantifying patterns of species segregation and aggregation.     

Stoichiometric controls of nitrogen and phosphorus cycling in decomposing beech leaf litter

Resource stoichiometry (C:N:P) is an important determinant of litter decomposition. However, the effect of elemental stoichiometry on the gross rates of microbial N and P cycling processes during litter decomposition is unknown. In a mesocosm experiment, beech (Fagus sylvatica L.) litter with natural differences in elemental stoichiometry (C:N:P) was incubated under constant environmental conditions. After three and six months, we measured various aspects of nitrogen and phosphorus cycling. We found that gross protein depolymerization, N mineralization (ammonification), and nitrification rates were negatively related to litter C:N. Rates of P mineralization were negatively correlated with litter C:P. The negative correlations with litter C:N were stronger for inorganic N cycling processes than for gross protein depolymerization, indicating that the effect of resource stoichiometry on intracellular processes was stronger than on processes catalyzed by extracellular enzymes. Consistent with this, extracellular protein depolymerization was mainly limited by substrate availability and less so by the amount of protease. Strong positive correlations between the interconnected N and P pools and the respective production and consumption processes pointed to feed-forward control of microbial litter N and P cycling. A negative relationship between litter C:N and phosphatase activity (and between litter C:P and protease activity) demonstrated that microbes tended to allocate carbon and nutrients in ample supply into the production of extracellular enzymes to mine for the nutrient that is more limiting. Overall, the study demonstrated a strong effect of litter stoichiometry (C:N:P) on gross processes of microbial N and P cycling in decomposing litter; mineralization of N and P were tightly coupled to assist in maintaining cellular homeostasis of litter microbial communities.     

An integrated approach to mangrove dynamics and management

The main objective of the MADAM project (Mangrove Dynamics and Management) is to generate the scientific basis enabling the sustainable stewardship of the resources of the Caeté mangrove estuary in Northeast Brazil in the sense of integrated coastal (zone) management. To achieve this, it is necessary to acquire in-depth knowledge of natural processes as well as of the relevant institutional, cultural, economic, social and political dynamics. Causal linkages within the ecosystem, as well as between ecosystem, economy and society, are analysed and explained via dynamic and trophic modelling. Scenario construction is intended to forecast the effects of acute or chronic interference on utilized resources, and to answer wider, management-related questions (e.g. restoration of destroyed areas, utilization potential for aquaculture). This paper describes the project strategy as developed and modified in the context of research results from the initial 2-yr project phase. It is argued that a continuous discussion process is essential to assess the validity of the strategies formulated at the beginning of a medium-time project, particularly if the project is of interdisciplinary nature.     

Wasserrahmenrichtlinie — Fortschritte und Defizite

Background

The water protection policy of the European Union sits on new footings since the end of 2000: The Water FrameworkDirective (WFD). By replacing, merging and renewing all parts of the European water protection policy from the 1970s, the WFD provides a consistent, transparent and comprehensive concept of what water management should be in the Europe of the coming decades. The new directive is aimed at a holistic approach towards integrated water protection. It sets ambitious high-quality goals to achieve a good status for European lakes and rivers primarily in ecological terms, gives details about the essential processes as well as instruments, and includes everything into a strict time schedule.

Aim

This article adresses progress and shortcomings at the implementation of the WFD in general and with reference to two selected case studies (Rivers Elbe and Upper Danube).

Results and Discussion

After introducing the WFD, its aims and exceptions, a policy summary and background document ‘Environmental objectives und the Water Framework Directive’ and the use of Environmental Quality Standards (EQS) for single ‘priority substances’ as well as ‘hazardous priority components’ is discussed. The initial characterization undertaken by the German states revealed that only about 14% of all surface waters are considered to meet the WFD objectives by the year of 2015. Approximately 60% of the water bodies assessed are at risk of failing the WFD objectives, if not systematic efforts are made to improve the quality. Screenings of sources and paths of exposure for ‘priority substances’ and ‘priority hazardous substances’ according WFD identified one distinct pollution source for surface waters: ‘Historical pollution from sediments’. Because of industrial emissions in the past several river catchment areas are expected to fail the standards demanded by the WFD, due to a risk of remobilization of contaminants from sediments. This holds true for the Rhine river with high loads of hexachlorobenzene (HCB) as well as for Elbe river, where contaminated sediments can be a severe problem. Therefore, integration of sediments into the holistic river basin management approach and their consideration within the ‘programmes of measures’ scheduled for 2009 is highly recommended. At present, a comprehensive weight-of-evidence study verifies whether the observed fish decline at the Upper Danube. River is caused by ecotoxicological hazard potentials of contaminated sediments.

Outlook

Combined investigations of sediment contamination and mobility as well as acute and mechanism specific biotests in effect directed analyses/weight-of-evidence studies show grent potential for the assessment of chemically polluted rivers and should be included into the ‘programmes of measures’ within future management concepts.

     

Comparison of methods used to calculate typical threshold values for potentially toxic elements in soil

The environmental quality of land can be assessed by calculating relevant threshold values, which differentiate between concentrations of elements resulting from geogenic and diffuse anthropogenic sources and concentrations generated by point sources of elements. A simple process allowing the calculation of these typical threshold values (TTVs) was applied across a region of highly complex geology (Northern Ireland) to six elements of interest; arsenic, chromium, copper, lead, nickel and vanadium. Three methods for identifying domains (areas where a readily identifiable factor can be shown to control the concentration of an element) were used: k-means cluster analysis, boxplots and empirical cumulative distribution functions (ECDF). The ECDF method was most efficient at determining areas of both elevated and reduced concentrations and was used to identify domains in this investigation. Two statistical methods for calculating normal background concentrations (NBCs) and upper limits of geochemical baseline variation (ULBLs), currently used in conjunction with legislative regimes in the UK and Finland respectively, were applied within each domain. The NBC methodology was constructed to run within a specific legislative framework, and its use on this soil geochemical data set was influenced by the presence of skewed distributions and outliers. In contrast, the ULBL methodology was found to calculate more appropriate TTVs that were generally more conservative than the NBCs. TTVs indicate what a “typical” concentration of an element would be within a defined geographical area and should be considered alongside the risk that each of the elements pose in these areas to determine potential risk to receptors.     

Development of a MSW classification system for the evaluation of mechanical properties

To date, sparse information is available on the mechanical properties of municipal solid waste and the results of published work are often hard to compare due to differences in waste composition and therefore properties. To allow comparison, a unified classification system for waste is deemed crucial. Existing classification systems are presented and discussed. For a geotechnical classification, mechanical properties, size, shape and degradability potential of waste components have to be taken into account. A new and improved classification system for waste components is proposed, which complies with the requirements of a geotechnical classification system. It classifies waste components based on: (1) their material engineering properties (e.g., shear, compressive and tensile strength), (2) a size distribution of the components, (3) the component shape (reinforcing, compressible and incompressible), and (4) the degree of degradability. The proposed classification system is applied to data from the literature and methods for presenting classification information are demonstrated. Further work required to develop a full classification system for waste bodies is highlighted.     

The influence of initial conditions on the propagation of smouldering fires in dust accumulations

A mathematical model is presented which allows one to treat the combined phenomena of heat, mass and species transfer by diffusion as they occur within smouldering fires in accumulations of dust or other solid bulk materials. The model was applied to predict self-ignition temperatures of five different dusts, where it could be shown that computed and experimental self-ignition temperatures coincide within an error margin of ±5%.

For smouldering fires, if initiated by either self-ignition or an ignition source, it could be shown that the temperature and the velocity at which the reaction front propagates both depend on the volume of the dust accumulation. In addition, the propagation velocity increases when the initial temperature of the dust accumulation is increased and decreases when the initial moisture content of the dust accumulation is increased.

Comparisons of the numerical model with experiments show that the smouldering propagation is mirrored qualitatively, while the accuracy of the computations strongly depends on the accuracy of the input parameters, namely on the apparent activation energy.     

Enhancement of gasworks groundwater remediation by coupling a bio-electrochemical and activated carbon system

Environmental Science and Pollution Research - Here, we show the electrical response, bacterial community, and remediation of hydrocarbon-contaminated groundwater from a gasworks site using a...     

Consumer Attitudes Towards Alternatives to Piglet Castration Without Pain Relief in Organic Farming: Qualitative Results from Germany

In order to avoid the occurrence of boar taint, castration of piglets without pain relief is a common practice in pork production. Due to increasing animal welfare concerns, the practice will be banned in organic agriculture from 2012 and alternative methods will have to be implemented. An important factor for the successful implementation of such alternatives is consumers’ acceptance of the methods, as consumers’ daily buying decisions are crucial to the further development of the organic pork sector. Thus, this paper explores organic consumers’ attitudes towards piglet castration without pain relief and three alternative methods and examines which aspects of these alternatives are important to consumers of organic products. The analysis of nine focus group discussions in Germany conducted in fall 2009 and involving a total of 89 participants, shows that castration without pain relief in organic farming was unacceptable for participants. Animal welfare, food safety, taste, and costs were principal aspects that participants used to assess the three alternatives. Participants had mainly favorable attitudes towards castration with anesthesia and analgesia. Although participants had some concerns regarding the fattening of boars (taste), there was openness towards this alternative due to its perceived naturalness. Immunocastration was seen quite critically because participants feared that this alternative might lead to (hormone) residues in meat. Overall, the results suggest that fattening of boars and castration with anesthesia and analgesia could be acceptable alternatives to consumers of organic pork.