Lysimeter Experiments to Investigate the Fate of Chemicals in Soils – Comparison of Five Different Lysimeter Systems

Several lysimeter scenarios and approaches exist to study the fate of agro-chemicals or contaminants from deposition in soil columns. In many systems just transport and leaching of the parent compound is followed, in some systems the leaching and transport of the metabolites is investigated as well. In more sophisticated lysimeter systems the volatilization and also the mineralization of the applied chemicals can be additionally monitored. Depending on the lysimeter system used and on the fact whether the applied chemicals are ¹⁴C-labeled or not, different results and various interpretations of the results might be achieved. Different lysimeter systems are described in this paper and a real dataset of a specific lysimeter experiment was transferred and evaluated in a virtual approach in the different lysimeter systems in order to show the advantages and disadvantages of the various systems.     

Screening zur Mobilisierbarkeit von Kupfer aus Böden und Schlämmen

In the presented paper, the pHstat-procedure is compared with four simple extraction procedures. These procedures make use of the following extraction solutions: distilled water (based on DIN 38414 part 4, DIN-S4), 1 mol/L ammonium nitrate, 1 mol/L ammonium acetate at pH 7.0 and 1 mol/L sodium acetate at pH 5.0, respectively. The extraction procedures were applied to 10 different soil samples and 2 sludges. The DIN-S4-procedure shows the lowest amounts of mobilized copper. The highest parts are extracted by sodium acetate solution. For the procedures investigated, the mobilized amounts extracted by ammonium acetate solution are most comparable with those of the pHstat-procedure. The simple sodium acetate procedure is useful for screening to select significant samples from a large number of soils. Thus, the high effort caused by the pHstat-procedure can be reduced to a minimum through the application of this screening procedure. The application of this screening, however, is difficult for samples containing large parts of organic compounds, e.g. sewage sludge. These samples show a different extracting behaviour.     

Biomonitoring zur wirkungsbezogenen Ermittlung der Schadstoffbelastung in terrestrischen Ökosystemen

Biomonitoring programmes provide relevant information, which may supplement ambient air pollution monitoring or modelling around emission sources. As a prerequisite, assessment scales for biomonitoring data have to be derived based on an objective evaluation of available data, as well as on a scheme of presentation, which is suggestive and easily understandable even for laymen. Based on an evaluation of numerous monitoring programmes, assessment scales for biomonitoring results are derived for plant biomonitoring, which also serve as a basis for the graphical presentation of monitoring results. This study is focussed on bioindicator plants like mosses (passive biomonitoring) and exposed lichens (active biomonitoring), in which 14 metal elements are investigated. As an example, data from a local biomonitoring network around a cement plant were used to demonstrate the use of the assessment scales derived and the presentation scheme developed. Data sets from about 15 moss and 24 lichen biomonitoring programmes, comprising more than 1000 specimens, were sorted by their pollutant characteristics in order to form the database. Data on the metal contents of species demonstrating similar values with respect to growth characteristics and habit, and representing background or low pollution levels, are aggregated and their statistical distributions are evaluated. Spacing of the assessment scales and their colour designations are derived from the 50-, 75-, 90- and 95-percentile values. Graphical presentation allows a comparison of the absolute values of metal contents and a relative association of measured values. Exemplary results from moss and lichen monitoring around a cement plant are generally below or slightly above the median values at background and low-pollution sites. Metal contents are higher in lichens compared to mosses for 7 elements (Cd, Cu, Hg, Pb, Sb, Sn, Zn), and are lower in lichens only for thallium. The assessment scheme presented is mainly aimed at the practitioner in the field of biomonitoring in order to provide a reliable and sound scale of assessment by comparison on an absolute scale rather than presenting the basis of ecological risk assessment. Differences in metal content of co-located samples of various moss species and possible correction procedures are briefly discussed- as well as the consequences of pooling monitoring data across various moss species for the quality of assessment scales. Further evaluations shall focus on species-specific rather than on pooled databases and will investigate the consequences of the use of correction factors when extrapolating metal data from one monitoring species to another.     

A survey on the utility of the USEPA CADDIS stressor identification procedure

The Environmental Protection Agency (EPA) has made available on the worldwide web a systematic stream stressor identification procedure, the “Causal Analysis/Diagnosis Decision Information System” or CADDIS. We report here the results of a survey of regulators and scientists in 11 states who use CADDIS or another stressor identification procedure in their work. The 13 survey questions address guidelines as to what impairment scenarios to approach with stressor identification, what information is needed to perform stressor identification, and what the stakeholder role is in performing stressor identification. At the time of this survey (the summer of 2009), the EPA CADDIS website was less commonly used among the state regulators surveyed than the published EPA stressor identification document on which it is based. The respondents generally find the EPA stressor identification procedure useful and capable of being adapted to their individual needs. Survey respondents all use stressor identification in their Total Maximum Daily Load work, but also in a wide variety of other applications. All the “types of evidence” included in the CADDIS stressor identification procedure are used by the practitioners surveyed with the exception of the results of ecological simulation models. While the CADDIS documentation encourages the involvement of stakeholders in stressor identification, most respondents do not assemble stakeholder teams of local officials and citizens to participate in stressor analyses.     

Modeling 4-Chlorophenol Removal from Aqueous Solutions by Granular Activated Carbon

Since phenols and phenolic compounds in many industrial wastewaters are toxic organic contaminants for humans and aquatic life, to remove these compounds via the most efficient way is very important for environmental remediation treatment. In this context, almost all of the isotherm models (Freundlich, Langmuir, Temkin, Redlich–Peterson, Sips, and Khan) for adsorption in the literature were applied to explain the adsorption mechanism of 4-chlorophenol on activated carbon in this study. Also theoretical modeling data were obtained using model equations; interpolation and analysis of variance were made to compare data by using statistics software. In addition, the thermodynamic and kinetic studies for adsorption mechanism were included in the article. The adsorption of 4-chlorophenol on activated carbon fits well to the pseudo-first-order kinetic model than the pseudo-second-order, intraparticular diffusion and Bangham models. It is also indicated that 4-chlorophenol adsorption by granular activated carbon would be attributed to a type of transition between physical and chemical adsorption rather than a pure physical or chemical adsorption process. As a result, an environmental remediation problem and the adsorption mechanism on activated carbon that can be regarded as a solution to this problem are described and explained using the mathematical models and calculations in this study.     

Suspended particulate matter estimates using optical and acoustic sensors: application in Nestos River plume (Thracian Sea,North Aegean Sea)

The present study investigates the use of combined methods of optical and acoustic sensors, in collaboration with direct in situ measurements, for the calibration and validation of a model transforming acoustic backscatter intensity series into suspended particulate matter (SPM) concentration datasets. The model follows previously elaborated techniques, placing particular attention to the parameterization of the acoustic absorption index as a function of water physical properties. Results were obtained from the annual deployment (during 2007–2008) of an upward-facing acoustic Doppler current profiler (ADCP) (307 kHz), equipped with a Wave Array, and an optical backscatter sensor (OBS), at the bottom of Thassos Passage near Nestos River plume (Thracian Sea, Northern Greece). The OBS was calibrated through linear regression, using 2007 and 2012 field sampling data, exhibiting an error of 13–14 % due to chlorophyll presence. The ADCP signal was calibrated through simultaneous measurements of backscatter intensity and turbidity profiles. Harmonic analysis on the model-produced SPM concentrations explained the tidal influence on their variability, especially during the summer. Empirical orthogonal functions analysis revealed the impact of waves and wave-induced currents on SPM variability. Finally, Nestos River sediment load was found uncorrelated to the SPM change in Thassos Passage, due to the dispersal and sediment deposition near the river mouth.     

Statistical characteristics of selected elements in vegetables from Kosovo

Zinc, copper, iron, chromium and cobalt are essential elements for human health, showing toxicity only in high concentrations, while lead and cadmium are extremely toxic even as traces. Therefore, it is important to monitor the contents of toxic metals in vegetables. Large number of vegetables is grown and used in nutrition, in Kosovo. The concentrations of selected elements in vegetables (radish, onion, garlic and spinach) from Kosovo were determined using ICP-OES method. Oral intake of metals and health risk index were calculated. Statistical analysis indicated numerous positive correlations between concentrations of selected elements in vegetables. As a result of principal component analysis, 15 new variables were obtained which were characterized by eigenvalues. The sequence of health quotients for the heavy metals followed the decreasing order Zn?=?Mn?>?Pb?>?Cu?>?Ni?>?Fe?>?Cd?>?Co?>?Cr. The health quotients for all investigated heavy metals were below 1 (one), which is considered safe. The vegetables from Kosovo are mainly safe for use in everyday diet.     

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.     

Persistence and effect of processing on reduction of chlorantraniliprole residues on brinjal and okra fruits

Dissipation and decontamination of chlorantraniliprole (Coragen 18.5 SC) in brinjal and okra fruits were studied following field application at single and double doses of 30 and 60 g ai ha^?1, and the residues of the insecticide was estimated using LC-MS/MS. Initial residues of chlorantraniliprole at single and double doses on the fruits of brinjal were 0.72 and 1.48 mg kg^?1, while on okra fruits, the residues were 0.48 and 0.91 mg kg^?1, respectively. The residues reached below detectable level of 0.01 mg kg^?1 on the 10th day. Half-life of chlorantraniliprole at 30 and 60 g ai ha^?1 on brinjal was 1.58 and 1.80 days with the calculated waiting period of 0.69 and 2.38 days, whereas on okra, the values were 1.60 and 1.70 and 0 and 1.20 days, respectively. The extent of removal of chlorantraniliprole using simple decontaminating techniques at 2 h and 3 days after spraying was 40.99–91.37 % and 29.85–89.12 %, respectively, from brinjal fruits and 47.78–86.10 % and 41.77–86.48 %, respectively, from okra fruits.     

Dissipation kinetics and residues of triazolopyrimidine herbicides flumetsulam and florasulam in corn ecosystem

The dynamic and residues of florasulam and flumetsulam in corn field ecosystem were investigated using quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The limits of quantification (LOQs) of the proposed method ranged from 0.005 to 0.01 mg/kg. Mean recoveries and relative standard deviations (RSDs) of the two compounds in all samples at three spiking levels ranged 94–110 % and 2.0–9.2 %, respectively. Florasulam and flumetsulam degradation followed first-order kinetics with half-lives 1.7–2.9 and 3.3–8.7 days in soil and 1.3–1.8 and 0.9–1.7 days in plant, respectively. The residues in all the samples were found to be less than the LOQs at preharvest intervals of 53 and 78 days. The results suggest that the combined use of florasulam and flumetsulam on corn is considered to be safe under the recommended conditions and can be utilized for establishing the maximum residue limit (MRL) of florasulam in corn in China.