The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

Combining Logistic Models with Multivariate Methods for the Rapid Biological Assessment of Rivers Using Macroinvertebrates

This work represents an attempt to define a simple method to classify the relative degree of disturbance of sites in lotic systems on the basis of comparison of their faunistic composition with reference sites. Two ecotypes were selected in northern Portugal where benthic invertebrates were sampled in reaches with different levels of contamination. As a first stage, previous Geographic Information System information was used to define reference sites in each ecotype. Afterwards, multivariate techniques and non linear estimation models were combined to assess biological quality. This method allowed us to quantify sites according to increasing levels of contamination, after the probabilities of occurrence of taxa along a gradient of contamination taking into account the reference condition. The results suggest that this method is sensitive to organic pollution, easy to interpret, namely the species tolerance, and could be a good framework to establish regional rankings depending on the ecological impact of river sites.     

Characterisation of Selected Lentic Habitats of Dharwad, Haveri and Uttar Kannada Districts of Karnataka State, India

Water quality survey was undertaken to study the current status of water quality of some lentic habitats of Dharwad, Haveri and Uttar Kannada districts, to provide a baseline data, comprising study of their main physical and chemical characteristics and also to evaluate the recent limnological changes those have occurred over a time period in some lentic habitats. Trophic status was also analysed. Present study reveals that Unkal lake, and B.K. Shigigatti tank of Dharwad district, Timmapur, Hosalli, and Krishnapur tanks of Haveri district are fast progressing towards hypereutrophication. Of the other tanks, Galgi tank of Dharwad district, Gudgur, Hanamapur, Medleri, and Kadkol tanks of Haveri district have reached the eutrophic stage. The anthropogenic activities, sewage and fertilizers used in agricultural fields appear to be the major causes of the eutrophication in these tanks. If the habitats have to be preserved for their intended use, sustainable and holistic management measures for the remediation of the tanks are an immediate necessity.     

Comparative Metal Distribution in Hair of Pakistani and Libyan Population and Source Identification by Multivariate Analysis

Using nitric acid-perchloric acid wet digestion based FAAS method ten selected metals (Cd, Co, Cr, Fe, K, Mn, Na, Ni, Pb and Zn) were determined in the scalp hair of male Pakistani and Libyan donors (n = 62), between 3–54 years age and residing in typical urban areas. The study was taken up to identify sources of metal distribution in two diverse population segments exposed to different environments. Sodium emerged with the highest mean hair concentration of 511.0 μg/g and 496.9 μg/g for Libyan and Pakistani donors respectively, followed by K, at 266.2 μg/g and 242.4 μg/g for the two donor categories. Cadmium showed the lowest mean hair concentration for both Pakistani (0.380 μg/g) and Libyan (0.530 μg/g) donors. Levels of Na, K, Pb, Cr and Cd were higher in hair of Libyan donors compared with Pakistani counterparts which showed higher comparative levels of Zn, Fe, Co, Ni and Mn. Strong metal-to-metal correlations were found between Na–K (r = 0.638) and Cd–Co (r = 0.574) for Pakistani donors, while for Libyan donors, Na–K (r = 0.680) and Fe–Mn (r = 0.624) correlations emerged as strongly significant. Only K was found to have a strong positive correlation (r = 0.611) with age for Pakistani donors while this correlation was significantly negative (r = −0.500) for Libyan donors, probably arising from individual food habits. Other metals showed no viable relationship with age. Principal Component Analysis (PCA) and Cluster Analysis (CA) of the data evidenced food, industrial emissions and automobile emissions as possible sources of metal distribution. The results of the present study are compared with those reported for subjects from other regions of the world.     

Little Egrets (Egretta Garzetta) and Trace-Metal Contamination in Wetlands of China

The rapidly developing Asian countries may face threatening environmental contamination, that however remains largely unassessed. We studied persistent trace elements in three wetlands, Poyang Lake, relatively unpolluted, and Tai Lake, and Pearl River Delta, selected as hotspots of pollution in Central China. We adopted as indicator the Little Egret, a widespread colonial waterbird, and during 1999 and 2000 we collected and analysed the same samples as for a parallel study we conducted in Pakistan, e.g. eggs, body feathers of chicks, prey spontaneously regurgitated by the chicks, and sediments at the areas most used by foraging egrets. The levels of trace-metals at our three study areas were similar, or within the range, of those found in the few other studies for East Asia, with few exceptions. The concentrations of the various elements were below the threshold that may affect the survival or reproduction of the birds, and even the highest concentrations relative to background, i.e. Se in eggs, and Hg in feathers at Pearl Delta, do not pose toxic hazards. In sediments, the levels of trace elements were lower than the critical levels assumed for contaminated soil, except for alarming high levels of As at Poyang. These results do not confirm our expectation, that Poyang was relatively uncontaminated, while Tai and Pearl were polluted. Although trace metal concentration differed significantly among the three study areas, these differences were minor and were not consistent among elements and samples. The bioaccumulation ratios from sediments through prey, feather and egg, were consistent with our previous findings for Pakistan. Only Hg exhibited high bioaccumulation, while Se and Zn had low accumulation, and the other elements no accumulation. This reasserts that feathers of predators such as egrets, may be more sensitive indicators of environmental contamination for the elements subject to bioaccumulation, whereas the sediments or the organisms low in the food chain are better indicators for the other elements.     

Fruit Stones from Industrial Waste for the Removal of Lead Ions from Polluted Water

Lead, one of the earliest metals recognized and used by humans, has a long history of beneficial use. However, it is now recognized as toxic and as posing a widespread threat to humans and wildlife. Treatment of lead from polluted water and wastewater has received a great deal of attention. Adsorption is one of the most common technologies for the treatment of lead-polluted water. This technique was evaluated here, with the goal of identifying innovative, low-cost adsorbent. This study presents experiments undertaken to determine the suitable conditions for the use of peach and apricot stones, produced from food industries as solid waste, as adsorbents for the removal of lead from aqueous solution. Chemical stability of adsorbents, effect of pH, adsorbents dose, adsorption time and equilibrium concentration were studied. The results reveal that adsorption of lead ions onto peach stone was stronger than onto apricot stone up to 3.36% at 3 h adsorption time. Suitable equilibrium time for the adsorption was 3–5 h (% Pb adsorption 93% for apricot and 97.64% for peach). The effective adsorption range for pH in the range was 7–8. Application of Langmuir and Freundlich isotherm models show high adsorption maximum and binding energies for using these adsorbents for the removal of lead ions from contaminated water and wastewater.     

Factors affecting TCLP lead leachability from computer CPUs

The factors impacting lead leachability from computer central processing units (CPUs) during the toxicity characteristic leaching procedure (TCLP) were investigated. Several CPUs were disassembled and their component materials were decreased in size to meet the requirements of the TCLP. The impact of CPU composition was examined by leaching different combinations of the CPU components. The ferrous metal content of the mixture greatly impacted lead leaching. TCLP lead concentrations of CPUs predicted by leaching the lead-bearing printed wire boards alone were much greater than those measured when the ferrous metal of the CPU was included in the mixture. The leaching of iron and zinc from the galvanized steel components of the CPU created electrochemical conditions where lead was less soluble. Additional size reduction beyond that required by the TCLP did not result in additional lead leaching. As the volume of head space above the leaching solution increased, the concentration of lead measured increased as well.     

The effects of leachate recirculation with supplemental water addition on methane production and waste decomposition in a simulated tropical landfill

In order to increase methane production efficiency, leachate recirculation is applied in landfills to increase moisture content and circulate organic matter back into the landfill cell. In the case of tropical landfills, where high temperature and evaporation occurs, leachate recirculation may not be enough to maintain the moisture content, therefore supplemental water addition into the cell is an option that could help stabilize moisture levels as well as stimulate biological activity. The objectives of this study were to determine the effects of leachate recirculation and supplemental water addition on municipal solid waste decomposition and methane production in three anaerobic digestion reactors. Anaerobic digestion with leachate recirculation and supplemental water addition showed the highest performance in terms of cumulative methane production and the stabilization period time required. It produced an accumulated methane production of 54.87 l/kg dry weight of MSW at an average rate of 0.58 l/kg dry weight/d and reached the stabilization phase on day 180. The leachate recirculation reactor provided 17.04 l/kg dry weight at a rate of 0.14l/kg dry weight/d and reached the stabilization phase on day 290. The control reactor provided 9.02 l/kg dry weight at a rate of 0.10 l/kg dry weight/d, and reached the stabilization phase on day 270. Increasing the organic loading rate (OLR) after the waste had reached the stabilization phase made it possible to increase the methane content of the gas, the methane production rate, and the COD removal. Comparison of the reactors' efficiencies at maximum OLR (5 kgCOD/m(3)/d) in terms of the methane production rate showed that the reactor using leachate recirculation with supplemental water addition still gave the highest performance (1.56 l/kg dry weight/d), whereas the leachate recirculation reactor and the control reactor provided 0.69 l/kg dry weight/d and 0.43 l/kg dry weight/d, respectively. However, when considering methane composition (average 63.09%) and COD removal (average 90.60%), slight differences were found among these three reactors.     

Applying Integrated Urban Water Management Concepts: A Review of Australian Experience

This article explores recent Australian experiences in the application of the concept of integrated urban water management (IUWM) to land development sites through the review of 15 case studies. It discusses lUWM’s emergence and comments on the success or otherwise of Australian experience in its application. The understanding of IUWM is maturing within the Australian water industry, an occurrence that has been facilitated by demonstration sites such as those reviewed. Successes include the translation of IUWM concepts into well-functioning operational urban developments, significant reductions in the impact of the urban developments on the total water cycle, and the increasing acceptance of the concept within the water and land development industries. However, there is still room for greater integration of the water supply, stormwater, and wastewater components of the urban water cycle, improved dissemination of knowledge, enhancement of skills in both public and private organisations, and monitoring the performance of systems and technologies.